how can i see inner-tunnel portion? from debug? so, u didn't answer, how did u know it was extreme?) 08 декабря 2011, 16:20 от "David Peterson-19 [via FreeRadius]" <ml-node+s1045715n5058598h29@n5.nabble.com>: Actually the 5.x GHz Extreme product is a fully 16e protocol, just not WiMax certified. The 4-Motion product is fully WiMax certified as you point out. WiMax as a protocol uses EAP-TTLS/TLS and does not send the username in the outer tunnel. If you watch the debug you will see the username unencrypted in the inner-tunnel portion of the authentication. David From: freeradius-users-bounces+david.peterson=[hidden email] [mailto:freeradius-users-bounces+david.peterson=[hidden email]] On Behalf Of [hidden email] Sent: Thursday, December 08, 2011 2:34 AM To: [hidden email] Subject: Re[6]: authentetication with mysql and NAS type= other David, usually Alvarion WIMAX 802.16 is 4M products. Extreme is 802.16 standard but for nonWiMAX band = 5 GHz. All Alvarion hexes username, like [hidden email] So, you just gess it was Extreme?)) 07 декабря 2011, 20:33 от "David Peterson-19 [via FreeRadius]" <[hidden email]>: I know it’s Extreme because we sell Alvarion WiMax for all of North America J Keepaliveusernameandpassword is a generic request coming from the BTS which can either be accepted or denied. Either response is fine. The Extreme uses EAP-TTLS as does all WiMax so the username should be something like [hidden email] David From: freeradius-users-bounces+david.peterson=[hidden email] [mailto:freeradius-users-bounces+david.peterson=[hidden email]] On Behalf Of [hidden email] Sent: Wednesday, December 07, 2011 11:03 AM To: [hidden email] Subject: Re[4]: authentetication with mysql and NAS type= other [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 10.152.98.23,NAS-IP-Address = 10.152.98.23,Acct-Session-Id = "KeepAliveSessionId",User-Name = "KeepAliveUserNameAndPassword"' [acct_unique] Acct-Unique-Session-ID = "d83a716ff7f93aa5". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default +- entering group accounting {...} [detail] expand: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/radacct/10.152.98.23/detail-20111206 [detail] /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/10.152.98.23/detail-20111206 [detail] expand: %t -> Tue Dec 6 17:57:06 2011 ++[detail] returns ok ++[unix] returns fail Finished request 247. Cleaning up request 247 ID 56 with timestamp +1802 Going to the next request Ready to process requests. rad_recv: Access-Request packet from host 10.152.98.23 port 49154, id=177, length=181 User-Name = "KeepAliveUserNameAndPassword" NAS-IP-Address = 10.152.98.23 NAS-Port-Type = Wireless-802.16 NAS-Port = 0 Calling-Station-Id = "\000\000\000\000\000" NAS-Identifier = "000000001137128000" WiMAX-GMT-Timezone-offset = 0 Message-Authenticator = 0x892bc16577cd6753b2a7e0c0a3499523 Acct-Session-Id = "KeepAliveSessionId" User-Password = "KeepAliveUserNameAndPassword" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [sql] expand: %{User-Name} -> KeepAliveUserNameAndPassword [sql] sql_set_user escaped user --> 'KeepAliveUserNameAndPassword' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'KeepAliveUserNameAndPassword' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'KeepAliveUserNameAndPassword' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 [sql] User KeepAliveUserNameAndPassword not found ++[sql] returns notfound ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Login incorrect: [KeepAliveUserNameAndPassword/KeepAliveUserNameAndPassword] (from client 10.152.98.23/16 port 0 cli ) ======================================= login and password are correct! ow did you jnow that its extreme& by NAS identifirer? 07 декабря 2011, 19:16 от "David Peterson-19 [via FreeRadius]" <[hidden email]>: The only requests I see are User-Name = "KeepAliveUserNameAndPassword" This is just a keep-alive packet all Alvarion Extreme base stations send out. I do not see the CPE attempting to authenticate. David From: freeradius-users-bounces+david.peterson=[hidden email] [mailto:freeradius-users-bounces+david.peterson=[hidden email]] On Behalf Of [hidden email] Sent: Wednesday, December 07, 2011 10:05 AM To: [hidden email] Subject: Re[2]: authentetication with mysql and NAS type= other here is debug: ad_recv: Accounting-Request packet from host 10.152.98.23 port 49157, id=10, length=135 User-Name = "KeepAliveUserNameAndPassword" NAS-IP-Address = 10.152.98.23 NAS-Port-Type = Wireless-802.16 NAS-Port = 0 Calling-Station-Id = "\000\000\000\000\000" NAS-Identifier = "000000001137128000" WiMAX-GMT-Timezone-offset = 0 Acct-Status-Type = Stop Acct-Session-Id = "KeepAliveSessionId" # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 10.152.98.23,NAS-IP-Address = 10.152.98.23,Acct-Session-Id = "KeepAliveSessionId",User-Name = "KeepAliveUserNameAndPassword"' [acct_unique] Acct-Unique-Session-ID = "d83a716ff7f93aa5". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default +- entering group accounting {...} [detail] expand: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/radacct/10.152.98.23/detail-20111206 [detail] /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/10.152.98.23/detail-20111206 [detail] expand: %t -> Tue Dec 6 16:59:07 2011 ++[detail] returns ok ++[unix] returns fail Finished request 98. Cleaning up request 98 ID 10 with timestamp +570 Going to the next request Ready to process requests. rad_recv: Accounting-Request packet from host 10.152.98.23 port 49157, id=10, length=135 User-Name = "KeepAliveUserNameAndPassword" NAS-IP-Address = 10.152.98.23 NAS-Port-Type = Wireless-802.16 NAS-Port = 0 Calling-Station-Id = "\000\000\000\000\000" NAS-Identifier = "000000001137128000" WiMAX-GMT-Timezone-offset = 0 Acct-Status-Type = Stop Acct-Session-Id = "KeepAliveSessionId" # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 10.152.98.23,NAS-IP-Address = 10.152.98.23,Acct-Session-Id = "KeepAliveSessionId",User-Name = "KeepAliveUserNameAndPassword"' [acct_unique] Acct-Unique-Session-ID = "d83a716ff7f93aa5". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default +- entering group accounting {...} [detail] expand: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/radacct/10.152.98.23/detail-20111206 [detail] /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/10.152.98.23/detail-20111206 [detail] expand: %t -> Tue Dec 6 16:59:12 2011 ++[detail] returns ok ++[unix] returns fail Finished request 99. Cleaning up request 99 ID 10 with timestamp +575 Going to the next request Ready to process requests. rad_recv: Accounting-Request packet from host 10.152.98.23 port 49157, id=11, length=135 User-Name = "KeepAliveUserNameAndPassword" NAS-IP-Address = 10.152.98.23 NAS-Port-Type = Wireless-802.16 NAS-Port = 0 Calling-Station-Id = "\000\000\000\000\000" NAS-Identifier = "000000001137128000" WiMAX-GMT-Timezone-offset = 0 Acct-Status-Type = Stop Acct-Session-Id = "KeepAliveSessionId" # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 10.152.98.23,NAS-IP-Address = 10.152.98.23,Acct-Session-Id = "KeepAliveSessionId",User-Name = "KeepAliveUserNameAndPassword"' [acct_unique] Acct-Unique-Session-ID = "d83a716ff7f93aa5". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default +- entering group accounting {...} [detail] expand: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/radacct/10.152.98.23/detail-20111206 [detail] /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/10.152.98.23/detail-20111206 [detail] expand: %t -> Tue Dec 6 17:00:17 2011 ++[detail] returns ok ++[unix] returns fail Finished request 100. Cleaning up request 100 ID 11 with timestamp +640 Going to the next request Ready to process requests. rad_recv: Accounting-Request packet from host 10.152.98.23 port 49157, id=11, length=135 User-Name = "KeepAliveUserNameAndPassword" NAS-IP-Address = 10.152.98.23 NAS-Port-Type = Wireless-802.16 NAS-Port = 0 Calling-Station-Id = "\000\000\000\000\000" NAS-Identifier = "000000001137128000" WiMAX-GMT-Timezone-offset = 0 Acct-Status-Type = Stop Acct-Session-Id = "KeepAliveSessionId" # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 10.152.98.23,NAS-IP-Address = 10.152.98.23,Acct-Session-Id = "KeepAliveSessionId",User-Name = "KeepAliveUserNameAndPassword"' [acct_unique] Acct-Unique-Session-ID = "d83a716ff7f93aa5". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default +- entering group accounting {...} [detail] expand: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/radacct/10.152.98.23/detail-20111206 [detail] /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/10.152.98.23/detail-20111206 [detail] expand: %t -> Tue Dec 6 17:00:22 2011 ++[detail] returns ok ++[unix] returns fail Finished request 101. Cleaning up request 101 ID 11 with timestamp +645 Going to the next request Ready to process requests. rad_recv: Accounting-Request packet from host 10.152.98.23 port 49157, id=11, length=135 User-Name = "KeepAliveUserNameAndPassword" NAS-IP-Address = 10.152.98.23 NAS-Port-Type = Wireless-802.16 NAS-Port = 0 Calling-Station-Id = "\000\000\000\000\000" NAS-Identifier = "000000001137128000" WiMAX-GMT-Timezone-offset = 0 Acct-Status-Type = Stop Acct-Session-Id = "KeepAliveSessionId" # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] Hashing 'NAS-Port = 0,Client-IP-Address = 10.152.98.23,NAS-IP-Address = 10.152.98.23,Acct-Session-Id = "KeepAliveSessionId",User-Name = "KeepAliveUserNameAndPassword"' [acct_unique] Acct-Unique-Session-ID = "d83a716ff7f93aa5". ++[acct_unique] returns ok [suffix] No '@' in User-Name = "KeepAliveUserNameAndPassword", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default +- entering group accounting {...} [detail] expand: /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/radacct/10.152.98.23/detail-20111206 [detail] /var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radacct/10.152.98.23/detail-20111206 [detail] expand: %t -> Tue Dec 6 17:00:27 2011 ++[detail] returns ok ++[unix] returns fail Finished request 102. Cleaning up request 102 ID 11 with timestamp +650 Going to the next request Ready to process requests. 07 декабря 2011, 18:37 от "Alan DeKok-2 [via FreeRadius]" <[hidden email]>: [hidden email] wrote:
1. I was lucky to auth Wifi users via cisco AP (NAS type cisco). but Simulteneous-Use is not working.
See the FAQ for "it doesn't work"
2. my wimax users (vendor Alvarion) cannot authenticate. Althou, i can authenticate them from users file.
Without the debug log, it's impossible to know.
what can be a problem?
You didn't follow the existing documentation. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ---------------------------------------------------------------------- If you reply to this email, your message will be added to the discussion below: http://freeradius.1045715.n5.nabble.com/authentetication-with-mysql-and-NAS-... To unsubscribe from authentetication with mysql and NAS type= other, click here. NAML ---------------------------------------------------------------------- View this message in context: Re[2]: authentetication with mysql and NAS type= other Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ---------------------------------------------------------------------- If you reply to this email, your message will be added to the discussion below: http://freeradius.1045715.n5.nabble.com/authentetication-with-mysql-and-NAS-... To unsubscribe from authentetication with mysql and NAS type= other, click here. NAML ---------------------------------------------------------------------- View this message in context: Re[4]: authentetication with mysql and NAS type= other Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ---------------------------------------------------------------------- If you reply to this email, your message will be added to the discussion below: http://freeradius.1045715.n5.nabble.com/authentetication-with-mysql-and-NAS-... To unsubscribe from authentetication with mysql and NAS type= other, click here. NAML ---------------------------------------------------------------------- View this message in context: Re[6]: authentetication with mysql and NAS type= other Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ---------------------------------------------------------------------- If you reply to this email, your message will be added to the discussion below: http://freeradius.1045715.n5.nabble.com/authentetication-with-mysql-and-NAS-... To unsubscribe from authentetication with mysql and NAS type= other, click here. NAML -- View this message in context: http://freeradius.1045715.n5.nabble.com/authentetication-with-mysql-and-NAS-... Sent from the FreeRadius - User mailing list archive at Nabble.com.