RE: MSCHAP No logon servers are currently available

12 Aug 2021

      Hai, 

Please read : 
https://wiki.samba.org/index.php/Authenticating_Freeradius_against_Active_Di... 
This one is at the moment the only page with the complete info you need.. 
(for this error)

@Alan, 
These pages are not fully correct. 
http://deployingradius.com/documents/configuration/active_directory.html 
Its not complete. (sorry).. You did add the part about :  ntlm auth = mschapv2-and-ntlmv2-only 
Just, im not seeing these parts. :  --allow-mschapv2 
Which is key to make it work. 

https://wiki.freeradius.org/guide/freeradius-active-directory-integration-ho...
Also i see incorrect SMB.conf settings and both are missing the part to use NTLMv2. 
The link to the samba wiki contain all needed info for the freeradius part. 
For the smb.conf part, that depends if its a stand alone samba server of domain member/AD-DC. 

Updating these could save you lots of message in the list. ;-) 

Greetz, 

Louis
...
-----Oorspronkelijk bericht-----
Van: Freeradius-Users 
[mailto:freeradius-users-bounces+belle=bazuin.nl@lists.freerad
ius.org] Namens Jure Simši?? via Freeradius-Users
Verzonden: donderdag 12 augustus 2021 11:07
Aan: Freeradius-Users
CC: Jure Simši??
Onderwerp: MSCHAP No logon servers are currently available
Hi, 
I've been trying to set up radius+AD integration. I'm 
following the docs 
http://deployingradius.com/documents/configuration/active_dire
ctory.html and everything is ok until I get to the last part 
where I enable ntlm_auth in mods/mschap. I'm getting back
(0) mschap: ERROR: Program returned code (1) and output 'No 
logon servers are currently available to service the logon 
request. (0xc000005e)'
(0) mschap: ERROR: No logon servers are currently available 
to service the logon request. (0xc000005e)
(0) mschap: Authentication failed
(full debug below). I've found a thread 
https://serverfault.com/questions/608227/authentication-via-ra
dius-mschapv2-error-691 saying there is a reg setting for win 
to force radius to use ntlm2 but the link on MS KB is dead 
and their search isn't useful.. Does this seem to be this 
NTLM/NTLM2 issue or might it be something else?
Also the users here are used to using their name@domain in 
their current setup and ntlm_auth expects just name as 
--username and not name@domain. I've seen the use of 
Stripped-User-Name but it seems you need to ~activate it 
somehow to use it. If I can use this there will be less 
confusion with the users. Is this possible?
Thank you
Cheers Jure
====================
# freeradius -X
FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file 
/etc/freeradius/3.0/mods-enabled/preprocess
including configuration file 
/etc/freeradius/3.0/mods-enabled/replicate
including configuration file 
/etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file 
/etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file 
/etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file 
/etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file 
/etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file 
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file 
/etc/freeradius/3.0/mods-enabled/detail.log
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file 
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file 
/etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file 
/etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/cui
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file 
/etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
 security {
  user = "freerad"
  group = "freerad"
  allow_core_dumps = no
 }
  name = "freeradius"
  prefix = "/usr"
  localstatedir = "/var"
  logdir = "/var/log/freeradius"
  run_dir = "/var/run/freeradius"
}
main {
  name = "freeradius"
  prefix = "/usr"
  localstatedir = "/var"
  sbindir = "/usr/sbin"
  logdir = "/var/log/freeradius"
  run_dir = "/var/run/freeradius"
  libdir = "/usr/lib/freeradius"
  radacctdir = "/var/log/freeradius/radacct"
  hostname_lookups = no
  max_request_time = 30
  cleanup_delay = 5
  max_requests = 16384
  pidfile = "/var/run/freeradius/freeradius.pid"
  checkrad = "/usr/sbin/checkrad"
  debug_level = 0
  proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
  type = fail-over
  home_server = localhost
 }
 realm example.com {
  auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client FMFUnifiController {
  ipaddr = 10.20.12.2
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = ntlm_auth
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file 
/etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  huntgroups = 
"/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file 
/etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_expiration
  # Loading module "expiration" from file 
/etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_utf8
  # Loading module "utf8" from file 
/etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_logintime
  # Loading module "logintime" from file 
/etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file 
/etc/freeradius/3.0/mods-enabled/expr
  expr {
  safe_characters = 
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567
89.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file 
/etc/freeradius/3.0/mods-enabled/files
  files {
  filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  acctusersfile = 
"/etc/freeradius/3.0/mods-config/files/accounting"
  preproxy_usersfile = 
"/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file 
/etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_eap
  # Loading module "eap" from file 
/etc/freeradius/3.0/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file 
/etc/freeradius/3.0/mods-enabled/detail
  detail {
  filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
ket-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file 
/etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file 
/etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  filename = "/var/log/freeradius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file 
/etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/freeradius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file 
/etc/freeradius/3.0/mods-enabled/unix
  unix {
  radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_mschap
  # Loading module "mschap" from file 
/etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
  ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key 
--username=%{mschap:User-Name:-None} 
--domain=%{%{mschap:NT-Domain}:-FMF.UNI-LJ.SI} 
--challenge=%{mschap:Challenge:-00} 
--nt-response=%{mschap:NT-Response:-00}"
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file 
/etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/usr/bin/ntlm_auth --request-nt-key 
--domain=FMF.UNI-LJ.SI --username=%{mschap:User-Name} 
--password=%{User-Password}"
  shell_escape = yes
  }
  # Loading module "exec" from file 
/etc/freeradius/3.0/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file 
/etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file 
/etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file 
/etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file 
/etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "echo" from file 
/etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file 
/etc/freeradius/3.0/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file 
/etc/freeradius/3.0/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file 
/etc/freeradius/3.0/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file 
/etc/freeradius/3.0/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file 
/etc/freeradius/3.0/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file 
/etc/freeradius/3.0/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file 
/etc/freeradius/3.0/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file 
/etc/freeradius/3.0/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file 
/etc/freeradius/3.0/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file 
/etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/freeradius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file 
/etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_soh
  # Loading module "soh" from file 
/etc/freeradius/3.0/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file 
/etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file 
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = 
"/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file 
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = 
"/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file 
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = 
"/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file 
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = 
"/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from 
file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = 
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "radutmp" from file 
/etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/freeradius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file 
/etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file 
/etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_pap
  # Loading module "pap" from file 
/etc/freeradius/3.0/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loading module "auth_log" from file 
/etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
ket-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file 
/etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
ket-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file 
/etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
ket-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file 
/etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
ket-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  instantiate {
  }
  # Instantiating module "preprocess" from file 
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file 
/etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "expiration" from file 
/etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "logintime" from file 
/etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "files" from file 
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "eap" from file 
/etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
       challenge = "Password: "
       auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
       tls = "tls-common"
   }
   tls-config tls-common {
       verify_depth = 0
       ca_path = "/etc/freeradius/3.0/certs"
       pem_file_type = yes
       private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
       certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
       ca_file = "/etc/ssl/certs/ca-certificates.crt"
       private_key_password = <<< secret >>>
       dh_file = "/etc/freeradius/3.0/certs/dh"
       fragment_size = 1024
       include_length = yes
       auto_chain = yes
       check_crl = no
       check_all_crl = no
       cipher_list = "DEFAULT"
       cipher_server_preference = no
       ecdh_curve = "prime256v1"
       tls_max_version = ""
       tls_min_version = "1.0"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
       tls = "tls-common"
       default_eap_type = "md5"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       virtual_server = "inner-tunnel"
       include_length = yes
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
       tls = "tls-common"
       default_eap_type = "mschapv2"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       proxy_tunneled_request_as_eap = yes
       virtual_server = "inner-tunnel"
       soh = no
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
       with_ntdomain_hack = no
       send_error = no
   }
  # Instantiating module "detail" from file 
/etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "etc_passwd" from file 
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "linelog" from file 
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file 
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "mschap" from file 
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
  # Instantiating module "IPASS" from file 
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file 
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file 
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file 
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "reject" from file 
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file 
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file 
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file 
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file 
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file 
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file 
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file 
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file 
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "cache_eap" from file 
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module 
rlm_cache_rbtree) loaded and linked
  # Instantiating module "attr_filter.post-proxy" from file 
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file 
/etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file 
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file 
/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from 
file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file 
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11
 Check item "FreeRADIUS-Response-Delay" 	found in filter 
list for realm "DEFAULT". 
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11
 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter 
list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from 
file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file 
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" 
from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file 
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "pap" from file 
/etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "auth_log" from file 
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not 
appear in detail output
  # Instantiating module "reply_log" from file 
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file 
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file 
/etc/freeradius/3.0/mods-enabled/detail.log
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file 
/etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- 
/etc/freeradius/3.0/sites-enabled/inner-tunnel:335
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
  ipaddr = *
  port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to 
server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 46672
Listening on proxy address :: port 50901
Ready to process requests
(0) Received Access-Request Id 46 from 127.0.0.1:45380 to 
127.0.0.1:1812 length 132
(0)   User-Name = "simsic"
(0)   NAS-IP-Address = 127.0.1.1
(0)   NAS-Port = 0
(0)   Message-Authenticator = 0x88a617ddc7958578159dfd6d5f7e5a96
(0)   MS-CHAP-Challenge = 0x70721771d4df83b1
(0)   MS-CHAP-Response = 
0x00010000000000000000000000000000000000000000000000000fd2084c
631219aaeac7af9d60484cf20f14d37c7dffff42
(0) # Executing section authorize from file 
/etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ 
/@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ 
/@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0) mschap: Found MS-CHAP attributes.  Setting 'Auth-Type  = mschap'
(0)     [mschap] = ok
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "simsic", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0)     [files] = noop
(0)     [expiration] = noop
(0)     [logintime] = noop
(0) pap: WARNING: No "known good" password found for the 
user.  Not setting Auth-Type
(0) pap: WARNING: Authentication will fail unless a "known 
good" password is available
(0)     [pap] = noop
(0)   } # authorize = ok
(0) Found Auth-Type = mschap
(0) # Executing group from file 
/etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) mschap: Client is using MS-CHAPv1 with NT-Password
(0) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key 
--username=%{mschap:User-Name:-None} 
--domain=%{%{mschap:NT-Domain}:-FMF.UNI-LJ.SI} 
--challenge=%{mschap:Challenge:-00} 
--nt-response=%{mschap:NT-Response:-00}:
(0) mschap: EXPAND --username=%{mschap:User-Name:-None}
(0) mschap:    --> --username=simsic
(0) mschap: ERROR: No NT-Domain was found in the User-Name
(0) mschap: EXPAND --domain=%{%{mschap:NT-Domain}:-FMF.UNI-LJ.SI}
(0) mschap:    --> --domain=FMF.UNI-LJ.SI
(0) mschap: mschap1: 70
(0) mschap: EXPAND --challenge=%{mschap:Challenge:-00}
(0) mschap:    --> --challenge=70721771d4df83b1
(0) mschap: EXPAND --nt-response=%{mschap:NT-Response:-00}
(0) mschap:    --> 
--nt-response=0fd2084c631219aaeac7af9d60484cf20f14d37c7dffff42
(0) mschap: ERROR: Program returned code (1) and output 'No 
logon servers are currently available to service the logon 
request. (0xc000005e)'
(0) mschap: ERROR: No logon servers are currently available 
to service the logon request. (0xc000005e)
(0) mschap: Authentication failed
(0)     [mschap] = fail
(0)   } # authenticate = fail
(0) Failed to authenticate the user
(0) Using Post-Auth-Type Reject
(0) # Executing group from file 
/etc/freeradius/3.0/sites-enabled/default
(0)   Post-Auth-Type REJECT {
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject:    --> simsic
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0)     [attr_filter.access_reject] = updated
(0)     [eap] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 46 from 127.0.0.1:1812 to 
127.0.0.1:45380 length 61
(0)   MS-CHAP-Error = "\000E=691 R=1 C=fdeee1d540dd4525 V=2"
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 46 with timestamp +5
Ready to process requests
-
List info/subscribe/unsubscribe? See 
http://www.freeradius.org/list/users.html

RE: MSCHAP No logon servers are currently available

L.P.H. van Belle