Hi guys I had to also set the "*use_tunneled_reply=yes*" in the eap.conf to get the Dynamic vlan assignment to work On 12 July 2013 19:42, val john <valjohn1647@gmail.com> wrote:
Hi guys ,
Small question , do i need to import radius ldap schema ( items like radiusprofiles ) to our ldap server to get this VLAN assignment work
Thank You john
On 12 July 2013 18:39, Arran Cudbard-Bell <a.cudbardb@freeradius.org>wrote:
On 12 Jul 2013, at 13:57, val john <valjohn1647@gmail.com> wrote:
Hi guys ,
i have a freeradius setup that works with ldap group authentication ,i also need to configure the dynamic VLAN assignment , so i configured the "users" file as fallows ,
DEFAULT Ldap-Group == "cn=staff,ou=groups,dc=ldap,dc=example,dc=com" Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = "100", Reply-Message = "You are Accepted"
DEFAULT Ldap-Group == "cn=nonstaff,ou=groups,dc=ldap,dc=example,dc=com" Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = "200", Reply-Message = "You are Accepted"
DEFAULT Auth-Type := Reject
,Do i need any other configuration file to be edited to get VALN assignment to work ..? or juts "users" file is enough
Just users file is fine.
Arran Cudbard-Bell <a.cudbardb@freeradius.org> FreeRADIUS Development Team
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html