Hi Alan, I've seen sites-available/dynamic-clients file, but this file has only an example using Packet-Src-IP-Address. As I intend to use the MAC address as CN, is the Called-Station-ID attribute available to use in dynamic-clients? -- Igor Sousa Em sex., 2 de set. de 2022 às 21:35, Alan DeKok <aland@deployingradius.com> escreveu:
On Sep 2, 2022, at 5:26 PM, Igor Sousa <igorvolt@gmail.com> wrote:
I work at a company with more than 300 APs and this number only increases. To permit each AP to connect to Freeradius, I've configured a specified VLAN with DHCPv4 and I've delivered to APs. The clients.conf has looked like this:
client dhcp-aps { ipaddr = 10.20.0.0/20 secret = testing123 shortname = dhcp-aps nastype = other }
That's fine.
But I would like to store the clients configuration on a LDAP base using radiusClient scheme where the radiusClientIdentifier is the AP's MAC address. Then I intend to configure dynamic clients to allow the same created network to use Freeradius, but it will use Called-Station-ID to auth the AP on LDAP.
I've googled it and found it https://sourceforge.net/p/hotcakes/wiki/YfiTechDynamicClients/ using Freeradius 2.1.12. Not 3.x though. Is it possible?
See sites-available/dynamic-clients
There are examples and documentation for this.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html