Hi, hoping someone has some advise on thise but I had DNIS proxy working and im not sure what I did and now it has stopped working. In the acct_users file I have DEFAULT Called-Station-Id == "5500", Proxy-To-Realm := "xxx" Fall-Through = yes In the proxy file I have realm xxx { type = radius authhost = xxxx:1645 accthost = xxxx:1646 secret = something } But when I test it never seems to trigger the DNIS proxy setup. This is what I get below, also named realms are working. rad_recv: Access-Request packet from host 209.213.66.12:1650, id=114, length=94 User-Name = "ectest" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 1 Called-Station-Id = "5500" Proxy-State = 0x471e493f7f0000010495000000000000000000000000000000000000 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "ectest", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 modcall[authorize]: module "files" returns notfound for request 0 modcall: leaving group authorize (returns ok) for request 0 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list ---