Hi everybody, Im using freeradius 1.1.0 and an Audiocodes as NAS. Audiocodes is sending some parameters accounting as Vendor-4923-Attr-XX. Here an example: rad_recv: Accounting-Request packet from host 192.1.1.1:1813, id=2, length=297 Acct-Session-Id = "1288892787" NAS-IP-Address = 192.1.1. NAS-Port-Type = Async Acct-Status-Type = Start Vendor-4923-Attr-25 = 0x683332332d73657475702d74696d653d Vendor-4923-Attr-33 = 0x683332332d67772d69643d Vendor-4923-Attr-1 = 0x683332332d696e636f6d696e672d636f6e662d69643d3334333533393335203337333233363332203330333233313332203330333033303332 Vendor-4923-Attr-27 = 0x683332332d63616c6c2d747970653d564f4950 Vendor-4923-Attr-26 = 0x683332332d63616c6c2d6f726967696e3d416e73776572 Called-Station-Id = "043353612323" Calling-Station-Id = "2135866293" Vendor-4923-Attr-24 = 0x683332332d636f6e662d69643d3334333533393335203337333233363332203330333233313332203330333033303332 I suspect the problem is I don't have a dictionary for Audiocodes. If it is the problem, can somebody tell me where can I find it ? If not, can somebody give an idea? Thanks in advanced, Guido