Radius Testing. EAP-TTLS, (GTC - PAP) SSHA Password

28 Mar 2018

      Hi Freeradius Legends.

I've been rolling out an instance of freeradius in our environment. The documentation has been terrific and this mailing list also very helpful very helpful

I'm trying to use EAP - TTLS for authentication. I can bind to our IPA server without issue. I made a testing environment and was able to get accept packets without issue. However, while trying to test self-signed certificates in our live environment I encounter issue with what looks like problems with hashed passwords. (I think IPA uses salted MD5 hash passwords by default, but our environment uses SSHA1 passwords due to a migration from openLDAP).

My implementation steps are.

Install freeradius and freeradius ldap

remove testing certs and generate self signed certs

edit ldap module to bind to our IPA

edit EAP module to set type to TTLS, input certificate info, and set TTLS tunnel type to GTC

add Wifi AP to clients.conf

below is the output from debug mode. I've blanked out any company information for security purposes.

FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/ldap
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client ap1 {
  ipaddr = 10.0.2.2
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
  format = "%b %e %Y %H:%M:%S %Z"
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "ttls"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/var/log/radius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
  ldap {
  server = "PRIVATE"
  identity = "cn=PRIVATE"
  password = <<< secret >>>
   sasl {
   }
   user {
    scope = "sub"
    access_positive = yes
    sasl {
    }
   }
   group {
    filter = "(objectClass=posixGroup)"
    scope = "sub"
    name_attribute = "cn"
    membership_attribute = "memberOf"
    cacheable_name = no
    cacheable_dn = no
   }
   client {
    filter = "(objectClass=radiusClient)"
    scope = "sub"
    base_dn = "cn=users,cn=accounts,dc=swarm64,dc=com"
   }
   profile {
   }
   options {
    ldap_debug = 40
    chase_referrals = yes
    rebind = yes
    net_timeout = 1
    res_timeout = 10
    srv_timelimit = 3
    idle = 60
    probes = 3
    interval = 3
   }
   tls {
    start_tls = no
   }
  }
Creating attribute LDAP-Group
  instantiate {
  }
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "gtc"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20444
   accounting {
    reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
    reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
    start = 5
    min = 3
    max = 32
    spare = 10
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 30
    spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldap://ipa.swarm64.com:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 43837
Listening on proxy address :: port 56979
Ready to process requests
(0) Received Access-Request Id 40 from 10.0.2.2:57793 to 10.0.2.15:1812 length 179
(0)   User-Name = "PRIVATE"
(0)   NAS-Identifier = "802aa893e8b6"
(0)   NAS-Port = 0
(0)   Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm"
(0)   Calling-Station-Id = "08-E6-89-0E-B6-C4"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Connect-Info = "CONNECT 0Mbps 802.11b"
(0)   EAP-Message = 0x02110013016d697463682e73756c6c6976616e
(0)   Message-Authenticator = 0x2ce888a5b88a1f64a3bba17252e1ee69
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 17 length 19
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 18 length 6
(0) eap: EAP session adding &reply:State = 0xb938bff5b92aaa4a
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 40 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0
(0)   EAP-Message = 0x011200061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xb938bff5b92aaa4a056aeaca0b53c293
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 41 from 10.0.2.2:57793 to 10.0.2.15:1812 length 339
(1)   User-Name = "mitch.sullivan"
(1)   NAS-Identifier = "802aa893e8b6"
(1)   NAS-Port = 0
(1)   Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm"
(1)   Calling-Station-Id = "08-E6-89-0E-B6-C4"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Connect-Info = "CONNECT 0Mbps 802.11b"
(1)   EAP-Message = 0x021200a115800000009716030100920100008e03035abb6b8e83350c77c09873b809dc9e20570af75ef7c2c3b8891fe282c7c1628e00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00
(1)   State = 0xb938bff5b92aaa4a056aeaca0b53c293
(1)   Message-Authenticator = 0x69af12aa9f108a127e6ce26e676635fa
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 18 length 161
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xb938bff5b92aaa4a
(1) eap: Finished EAP session with state 0xb938bff5b92aaa4a
(1) eap: Previous EAP request found for state 0xb938bff5b92aaa4a, released from the list
(1) eap: Peer sent packet with method EAP TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Authenticate
(1) eap_ttls: Continuing EAP-TLS
(1) eap_ttls: Peer indicated complete TLS record size will be 151 bytes
(1) eap_ttls: Got complete TLS record (151 bytes)
(1) eap_ttls: [eaptls verify] = length included
(1) eap_ttls: (other): before/accept initialization
(1) eap_ttls: TLS_accept: before/accept initialization
(1) eap_ttls: <<< recv TLS 1.2  [length 0092]
(1) eap_ttls: TLS_accept: SSLv3 read client hello A
(1) eap_ttls: >>> send TLS 1.2  [length 0039]
(1) eap_ttls: TLS_accept: SSLv3 write server hello A
(1) eap_ttls: >>> send TLS 1.2  [length 088d]
(1) eap_ttls: TLS_accept: SSLv3 write certificate A
(1) eap_ttls: >>> send TLS 1.2  [length 014d]
(1) eap_ttls: TLS_accept: SSLv3 write key exchange A
(1) eap_ttls: >>> send TLS 1.2  [length 0004]
(1) eap_ttls: TLS_accept: SSLv3 write server done A
(1) eap_ttls: TLS_accept: SSLv3 flush data
(1) eap_ttls: TLS_accept: SSLv3 read client certificate A
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(1) eap_ttls: In SSL Handshake Phase
(1) eap_ttls: In SSL Accept mode
(1) eap_ttls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 19 length 1004
(1) eap: EAP session adding &reply:State = 0xb938bff5b82baa4a
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 41 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0
(1)   EAP-Message = 0x011303ec15c000000a2b1603030039020000350303a9ba92ba1ee869e774573a3bcd55bf89b7e57b7536b11691a6a1b9867e26a4d000c03000000dff01000100000b000403000102160303088d0b0008890008860003c5308203c1308202a9a003020102020101300d06092a864886f70d01010b050030
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xb938bff5b82baa4a056aeaca0b53c293
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 42 from 10.0.2.2:57793 to 10.0.2.15:1812 length 184
(2)   User-Name = "mitch.sullivan"
(2)   NAS-Identifier = "802aa893e8b6"
(2)   NAS-Port = 0
(2)   Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm"
(2)   Calling-Station-Id = "08-E6-89-0E-B6-C4"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Connect-Info = "CONNECT 0Mbps 802.11b"
(2)   EAP-Message = 0x021300061500
(2)   State = 0xb938bff5b82baa4a056aeaca0b53c293
(2)   Message-Authenticator = 0x276bba10619ba2754d0d8569ac713df9
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 19 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xb938bff5b82baa4a
(2) eap: Finished EAP session with state 0xb938bff5b82baa4a
(2) eap: Previous EAP request found for state 0xb938bff5b82baa4a, released from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: Peer ACKed our handshake fragment
(2) eap_ttls: [eaptls verify] = request
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 20 length 1004
(2) eap: EAP session adding &reply:State = 0xb938bff5bb2caa4a
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 42 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0
(2)   EAP-Message = 0x011403ec15c000000a2b23805e4d8a2ddc7e25f8e0148d1fc8b6ee49313359a4166de758c9f7d6319d4dc254391900857fe9c5321350e52e1cf40004bb308204b73082039fa003020102020900ee8187b851c53ea0300d06092a864886f70d01010b0500308184310b3009060355040613024445310f30
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xb938bff5bb2caa4a056aeaca0b53c293
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 43 from 10.0.2.2:57793 to 10.0.2.15:1812 length 184
(3)   User-Name = "mitch.sullivan"
(3)   NAS-Identifier = "802aa893e8b6"
(3)   NAS-Port = 0
(3)   Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm"
(3)   Calling-Station-Id = "08-E6-89-0E-B6-C4"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Connect-Info = "CONNECT 0Mbps 802.11b"
(3)   EAP-Message = 0x021400061500
(3)   State = 0xb938bff5bb2caa4a056aeaca0b53c293
(3)   Message-Authenticator = 0x0ebfb935074c09e0cf8e9b06d51575af
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 20 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xb938bff5bb2caa4a
(3) eap: Finished EAP session with state 0xb938bff5bb2caa4a
(3) eap: Previous EAP request found for state 0xb938bff5bb2caa4a, released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer ACKed our handshake fragment
(3) eap_ttls: [eaptls verify] = request
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 21 length 625
(3) eap: EAP session adding &reply:State = 0xb938bff5ba2daa4a
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 43 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0
(3)   EAP-Message = 0x01150271158000000a2bf70d01010b0500038201010057656da77bec697e07a15db071ef53510b58acfd5bb16b0d4fa3b9983fafd781fa075adbebb0f1a7e83fa9f251cd17784c6031ae311c7da76226bad76b53ed9a169407df51abb0d7a42e18933e94d070206a664963bf7bcf632d798616ea946797
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xb938bff5ba2daa4a056aeaca0b53c293
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 44 from 10.0.2.2:57793 to 10.0.2.15:1812 length 314
(4)   User-Name = "mitch.sullivan"
(4)   NAS-Identifier = "802aa893e8b6"
(4)   NAS-Port = 0
(4)   Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm"
(4)   Calling-Station-Id = "08-E6-89-0E-B6-C4"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Connect-Info = "CONNECT 0Mbps 802.11b"
(4)   EAP-Message = 0x0215008815800000007e16030300461000004241046482a8b543b2d9b8d2e72f7e7df5812c7a34eff35c29db2c2e756ebd23804b5a4c24a15d2ea8c9a9f185c0e59a78a3bea1c9ed005a4c2a4c6d2cc2f52c2ebaa01403030001011603030028e5df197cdec48e6a5f2386be95c6700f0606ab69cd2aff
(4)   State = 0xb938bff5ba2daa4a056aeaca0b53c293
(4)   Message-Authenticator = 0xb331a4f28a554cf3b11a82c0c09c67c8
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 21 length 136
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xb938bff5ba2daa4a
(4) eap: Finished EAP session with state 0xb938bff5ba2daa4a
(4) eap: Previous EAP request found for state 0xb938bff5ba2daa4a, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer indicated complete TLS record size will be 126 bytes
(4) eap_ttls: Got complete TLS record (126 bytes)
(4) eap_ttls: [eaptls verify] = length included
(4) eap_ttls: <<< recv TLS 1.2  [length 0046]
(4) eap_ttls: TLS_accept: SSLv3 read client key exchange A
(4) eap_ttls: TLS_accept: SSLv3 read certificate verify A
(4) eap_ttls: <<< recv TLS 1.2  [length 0001]
(4) eap_ttls: <<< recv TLS 1.2  [length 0010]
(4) eap_ttls: TLS_accept: SSLv3 read finished A
(4) eap_ttls: >>> send TLS 1.2  [length 0001]
(4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A
(4) eap_ttls: >>> send TLS 1.2  [length 0010]
(4) eap_ttls: TLS_accept: SSLv3 write finished A
(4) eap_ttls: TLS_accept: SSLv3 flush data
(4) eap_ttls: (other): SSL negotiation finished successfully
(4) eap_ttls: SSL Connection Established
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 22 length 61
(4) eap: EAP session adding &reply:State = 0xb938bff5bd2eaa4a
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 44 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0
(4)   EAP-Message = 0x0116003d15800000003314030300010116030300286f61d365e37761ef674a2ff8c5af83927277ef86e370d9714c2bbe655bc3e61ad1dced6cda3c6e93
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xb938bff5bd2eaa4a056aeaca0b53c293
(4) Finished request
Waking up in 2.1 seconds.
(5) Received Access-Request Id 45 from 10.0.2.2:57793 to 10.0.2.15:1812 length 245
(5)   User-Name = "mitch.sullivan"
(5)   NAS-Identifier = "802aa893e8b6"
(5)   NAS-Port = 0
(5)   Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm"
(5)   Calling-Station-Id = "08-E6-89-0E-B6-C4"
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Connect-Info = "CONNECT 0Mbps 802.11b"
(5)   EAP-Message = 0x021600431580000000391703030034e5df197cdec48e6b14e9d997a3ef7941456ca4ebd3bebe9b401bb253eaea7d1aebb558386984e4037ac1901292c4df80fa8af7c0
(5)   State = 0xb938bff5bd2eaa4a056aeaca0b53c293
(5)   Message-Authenticator = 0x552c9c377d3d24c784d6f2d990e93452
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 22 length 67
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xb938bff5bd2eaa4a
(5) eap: Finished EAP session with state 0xb938bff5bd2eaa4a
(5) eap: Previous EAP request found for state 0xb938bff5bd2eaa4a, released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: Peer indicated complete TLS record size will be 57 bytes
(5) eap_ttls: Got complete TLS record (57 bytes)
(5) eap_ttls: [eaptls verify] = length included
(5) eap_ttls: [eaptls process] = ok
(5) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(5) eap_ttls: Got tunneled request
(5) eap_ttls:   EAP-Message = 0x02000013016d697463682e73756c6c6976616e
(5) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(5) eap_ttls: Got tunneled identity of mitch.sullivan
(5) eap_ttls: Setting default EAP type for tunneled EAP session
(5) eap_ttls: Sending tunneled request
(5) Virtual server inner-tunnel received request
(5)   EAP-Message = 0x02000013016d697463682e73756c6c6976616e
(5)   FreeRADIUS-Proxied-To = 127.0.0.1
(5)   User-Name = "mitch.sullivan"
(5) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(5) server inner-tunnel {
(5)   # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(5)     authorize {
(5)       policy filter_username {
(5)         if (&User-Name) {
(5)         if (&User-Name)  -> TRUE
(5)         if (&User-Name)  {
(5)           if (&User-Name =~ / /) {
(5)           if (&User-Name =~ / /)  -> FALSE
(5)           if (&User-Name =~ /@[^@]*@/ ) {
(5)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)           if (&User-Name =~ /\.\./ ) {
(5)           if (&User-Name =~ /\.\./ )  -> FALSE
(5)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)           if (&User-Name =~ /\.$/)  {
(5)           if (&User-Name =~ /\.$/)   -> FALSE
(5)           if (&User-Name =~ /@\./)  {
(5)           if (&User-Name =~ /@\./)   -> FALSE
(5)         } # if (&User-Name)  = notfound
(5)       } # policy filter_username = notfound
(5)       [chap] = noop
(5)       [mschap] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)       [suffix] = noop
(5)       update control {
(5)         &Proxy-To-Realm := LOCAL
(5)       } # update control = noop
(5) eap: Peer sent EAP Response (code 2) ID 0 length 19
(5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(5)       [eap] = ok
(5)     } # authorize = ok
(5)   Found Auth-Type = eap
(5)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(5)     authenticate {
(5) eap: Peer sent packet with method EAP Identity (1)
(5) eap: Calling submodule eap_gtc to process data
(5) eap_gtc: EXPAND Password:
(5) eap_gtc:    --> Password:
(5) eap: Sending EAP Request (code 1) ID 1 length 15
(5) eap: EAP session adding &reply:State = 0x91427604914370d8
(5)       [eap] = handled
(5)     } # authenticate = handled
(5) } # server inner-tunnel
(5) Virtual server sending reply
(5)   EAP-Message = 0x0101000f0650617373776f72643a20
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x91427604914370d87af3a510de6c033d
(5) eap_ttls: Got tunneled Access-Challenge
(5) eap: Sending EAP Request (code 1) ID 23 length 63
(5) eap: EAP session adding &reply:State = 0xb938bff5bc2faa4a
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 45 from 10.0.2.15:1812 to 10.0.2.2:57793 length 0
(5)   EAP-Message = 0x0117003f15800000003517030300306f61d365e37761f0a6e5400fc157ca918fd10d59cc8f12c7c6f22335b36a0b515311cd296c6d9942f7e4822ca95e77c4
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xb938bff5bc2faa4a056aeaca0b53c293
(5) Finished request
Waking up in 1.9 seconds.
(6) Received Access-Request Id 46 from 10.0.2.2:57793 to 10.0.2.15:1812 length 241
(6)   User-Name = "mitch.sullivan"
(6)   NAS-Identifier = "802aa893e8b6"
(6)   NAS-Port = 0
(6)   Called-Station-Id = "82-2A-A8-95-E8-B6:hell0swarm"
(6)   Calling-Station-Id = "08-E6-89-0E-B6-C4"
(6)   Framed-MTU = 1400
(6)   NAS-Port-Type = Wireless-802.11
(6)   Connect-Info = "CONNECT 0Mbps 802.11b"
(6)   EAP-Message = 0x0217003f1580000000351703030030e5df197cdec48e6c2888eeb2781b8ad97d23848e1a5a632ea339aa25353843b8fda0c963c89d4065468f14f039ba7ccd
(6)   State = 0xb938bff5bc2faa4a056aeaca0b53c293
(6)   Message-Authenticator = 0x2f1d651b69fac79c6c38fe9605a709bb
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 23 length 63
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x91427604914370d8
(6) eap: Finished EAP session with state 0xb938bff5bc2faa4a
(6) eap: Previous EAP request found for state 0xb938bff5bc2faa4a, released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: Peer indicated complete TLS record size will be 53 bytes
(6) eap_ttls: Got complete TLS record (53 bytes)
(6) eap_ttls: [eaptls verify] = length included
(6) eap_ttls: [eaptls process] = ok
(6) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(6) eap_ttls: Got tunneled request
(6) eap_ttls:   EAP-Message = 0x0201000f06536f7574686167746531
(6) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_ttls: Sending tunneled request
(6) Virtual server inner-tunnel received request
(6)   EAP-Message = 0x0201000f06536f7574686167746531
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "mitch.sullivan"
(6)   State = 0x91427604914370d87af3a510de6c033d
(6) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(6) server inner-tunnel {
(6)   session-state: No cached attributes
(6)   # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(6)     authorize {
(6)       policy filter_username {
(6)         if (&User-Name) {
(6)         if (&User-Name)  -> TRUE
(6)         if (&User-Name)  {
(6)           if (&User-Name =~ / /) {
(6)           if (&User-Name =~ / /)  -> FALSE
(6)           if (&User-Name =~ /@[^@]*@/ ) {
(6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)           if (&User-Name =~ /\.\./ ) {
(6)           if (&User-Name =~ /\.\./ )  -> FALSE
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)           if (&User-Name =~ /\.$/)  {
(6)           if (&User-Name =~ /\.$/)   -> FALSE
(6)           if (&User-Name =~ /@\./)  {
(6)           if (&User-Name =~ /@\./)   -> FALSE
(6)         } # if (&User-Name)  = notfound
(6)       } # policy filter_username = notfound
(6)       [chap] = noop
(6)       [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "mitch.sullivan", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)       [suffix] = noop
(6)       update control {
(6)         &Proxy-To-Realm := LOCAL
(6)       } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 1 length 15
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6)       [eap] = updated
(6)       [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(6) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(6) ldap:    --> (uid=PRIVATE)
(6) ldap: Performing search in "PRIVATE" with filter "(PRIVATE)", scope "sub"
(6) ldap: Waiting for search result...
(6) ldap: User object found at DN "uid=(PRIVATE)"
(6) ldap: Processing user attributes
(6) ldap: control:Password-With-Header += '{SSHA}h5MDNNZSAO+XIU+/xk/oLfupxBPpbBMjLs7WXA=='
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to PRIVATE
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(6)       [ldap] = updated
(6)       [expiration] = noop
(6)       [logintime] = noop
(6) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password
(6) pap: Removing &control:Password-With-Header
(6) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes
(6) pap: WARNING: Auth-Type already set.  Not setting to PAP
(6)       [pap] = noop
(6)     } # authorize = updated
(6)   Found Auth-Type = eap
(6)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6)     authenticate {
(6) eap: Expiring EAP session with state 0x91427604914370d8
(6) eap: Finished EAP session with state 0x91427604914370d8
(6) eap: Previous EAP request found for state 0x91427604914370d8, released from the list
(6) eap: Peer sent packet with method EAP GTC (6)
(6) eap: Calling submodule eap_gtc to process data
(6) eap_gtc: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6) eap_gtc:   Auth-Type PAP {
(6) pap: Login attempt with password
(6) pap: Comparing with "known-good" SSHA-Password
(6) pap: ERROR: SSHA digest does not match "known good" digest
(6) pap: Passwords don't match
(6)     [pap] = reject
(6)   } # Auth-Type PAP = reject
(6) eap: ERROR: Failed continuing EAP GTC (6) session.  EAP sub-module failed
(6) eap: Sending EAP Failure (code 4) ID 1 length 4
(6) eap: Failed in EAP select
(6)       [eap] = invalid
(6)     } # authenticate = invalid
(6)   Failed to authenticate the user
(6)   Using Post-Auth-Type Reject
(6)   # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(6)     Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject:    --> mitch.sullivan
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6)       [attr_filter.access_reject] = updated
(6)       update outer.session-state {
(6)         &Module-Failure-Message := &request:Module-Failure-Message -> 'pap: SSHA digest does not match "known good" digest'
(6)       } # update outer.session-state = noop
(6)     } # Post-Auth-Type REJECT = updated
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6)   EAP-Message = 0x04010004
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_ttls: Got tunneled Access-Reject
(6) eap: ERROR: Failed continuing EAP TTLS (21) session.  EAP sub-module failed
(6) eap: Sending EAP Failure (code 4) ID 23 length 4
(6) eap: Failed in EAP select
(6)     [eap] = invalid
(6)   } # authenticate = invalid
(6) Failed to authenticate the user
(6) Using Post-Auth-Type Reject
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject:    --> mitch.sullivan
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6)     [attr_filter.access_reject] = updated
(6)     [eap] = noop
(6)     policy remove_reply_message_if_eap {
(6)       if (&reply:EAP-Message && &reply:Reply-Message) {
(6)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(6)       else {
(6)         [noop] = noop
(6)       } # else = noop
(6)     } # policy remove_reply_message_if_eap = noop
(6)   } # Post-Auth-Type REJECT = updated
(6) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(6) Sending delayed response
(6) Sent Access-Reject Id 46 from 10.0.2.15:1812 to 10.0.2.2:57793 length 44
(6)   EAP-Message = 0x04170004
(6)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 0.8 seconds.
(0) Cleaning up request packet ID 40 with timestamp +22
(1) Cleaning up request packet ID 41 with timestamp +22
(2) Cleaning up request packet ID 42 with timestamp +22
(3) Cleaning up request packet ID 43 with timestamp +22
Waking up in 2.8 seconds.
(4) Cleaning up request packet ID 44 with timestamp +25
Waking up in 0.1 seconds.
(5) Cleaning up request packet ID 45 with timestamp +25
Waking up in 0.1 seconds.
(6) Cleaning up request packet ID 46 with timestamp +25
Ready to process requests

Thanks
Mitch.

Mitch.Sullivan
mitch.sullivan@swarm64.com
IT administrator | Swarm64 AS

Swarm64 AS Zweigstelle Hive
Ullsteinstr. 114 | 12109 Berlin | Germany

Radius Testing. EAP-TTLS, (GTC - PAP) SSHA Password

Mitch Sullivan