Alan, here is the output of everything with a failed request: FreeRADIUS Version 2.1.11, for host x86_64-redhat-linux-gnu, built on Sep 20 2011 at 13:55:32 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/redis including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/mschap.org including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/replicate including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/rediswho including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/soh including configuration file /etc/raddb/modules/perl.rpmnew including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/packetfence.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/packetfence including configuration file /etc/raddb/sites-enabled/packetfence-tunnel including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.10.20.62 { ipaddr = 10.10.20.62 require_message_authenticator = no secret = "testing123" shortname = "ap-tech01" } client 10.10.10.248 { ipaddr = 10.10.10.248 require_message_authenticator = no secret = "testing123" shortname = "wl-mgmt" } client 10.10.20.6 { ipaddr = 10.10.20.6 require_message_authenticator = no secret = "testing123" shortname = "testswitch" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap.org mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Instantiating module "ntlm_auth" from file /etc/raddb/modules/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=domain.net --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/pf/conf/ssl/server.key" certificate_file = "/usr/local/pf/conf/ssl/server.crt" dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "peap" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "packetfence-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "packetfence-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server packetfence { # from file /etc/raddb/sites-enabled/packetfence modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_perl Module: Instantiating module "perl" from file /etc/raddb/modules/perl.rpmnew perl { module = "/etc/raddb/example.pl" func_authorize = "authorize" func_authenticate = "authenticate" func_accounting = "accounting" func_preacct = "preacct" func_checksimul = "checksimul" func_detach = "detach" func_xlat = "xlat" func_pre_proxy = "pre_proxy" func_post_proxy = "post_proxy" func_post_auth = "post_auth" func_recv_coa = "recv_coa" func_send_coa = "send_coa" } Module: Checking preacct {...} for more modules to load Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/raddb/sql.conf sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "pf" password = "pfz3n" radius_db = "pf" read_groups = yes sqltrace = no sqltracefile = "/var/log/radius/sqltrace.sql" readclients = yes deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret FROM radius_nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " CALL acct_update ( '%S', '%{Acct-Session-Time}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Acct-Session-Id}', '%{SQL-User-Name}', '%{NAS-IP-Address}', '%{Framed-IP-Address}', '%{Acct-Status-Type}')" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', REPLACE(REPLACE('%{Called-Station-Id}','-',''),':',''), REPLACE(REPLACE('%{Calling-Station-Id}','-',''),':',''), '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " CALL acct_start ( '%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', REPLACE(REPLACE('%{Called-Station-Id}','-',''),':',''), REPLACE(REPLACE('%{Calling-Station-Id}','-',''),':',''), '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}', '%{Acct-Status-Type}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " CALL acct_stop ( '%S', '%{Acct-Session-Time}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Acct-Terminate-Cause}', '%{%{Acct-Delay-Time}:-0}', '%{Connect-Info}', '%{Acct-Session-Id}', '%{SQL-User-Name}', '%{NAS-IP-Address}', '%{Acct-Status-Type}')" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', REPLACE(REPLACE('%{Called-Station-Id}','-',''),':',''), REPLACE(REPLACE('%{Calling-Station-Id}','-',''),':',''), '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to pf@localhost:/pf rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret FROM radius_nas rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Read entry nasname=10.0.10.2,shortname=10.0.10.2,secret=s3cr3t rlm_sql (sql): Adding client 10.0.10.2 (10.0.10.2, server=<none>) to clients list rlm_sql (sql): Read entry nasname=10.0.10.3,shortname=10.0.10.3,secret=s3cr3t rlm_sql (sql): Adding client 10.0.10.3 (10.0.10.3, server=<none>) to clients list rlm_sql (sql): Released sql socket id: 4 Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server server packetfence-tunnel { # from file /etc/raddb/sites-enabled/packetfence-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" virtual_server = "packetfence" ipaddr = * port = 0 } listen { type = "acct" virtual_server = "packetfence" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 55126 Listening on authentication address * port 1812 as server packetfence Listening on accounting address * port 1813 as server packetfence Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=61, length=147 NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User EAP-Message = 0x0201000901726f6f74 User-Name = "root" NAS-Port = 34226 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x67b17e9993463e70db7e096dd5d4b3b6 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 1 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_perl: Added pair NAS-Port-Type = Wireless-802.11 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Called-Station-Id = 00-1F-DA-26-5D-44:SISD-Network rlm_perl: Added pair Calling-Station-Id = 00-16-EA-B9-D1-CC rlm_perl: Added pair Message-Authenticator = 0x67b17e9993463e70db7e096dd5d4b3b6 rlm_perl: Added pair User-Name = root rlm_perl: Added pair NAS-Identifier = nortel rlm_perl: Added pair EAP-Message = 0x0201000901726f6f74 rlm_perl: Added pair EAP-Type = Identity rlm_perl: Added pair NAS-Port = 34226 rlm_perl: Added pair NAS-IP-Address = 10.10.10.248 rlm_perl: Added pair NAS-Port-Id = AP106/1 rlm_perl: Added pair Auth-Type = EAP ++[perl] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 61 to 10.10.10.248 port 20002 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf36b0c2af34a91245e3660c64ffaedc Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=62, length=261 NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34226 State = 0xaf36b0c2af34a91245e3660c64ffaedc EAP-Message = 0x0202006919800000005f160301005a0100005603014edff0b468a58899972e56fbb9f1b99c921d470fe5329bcfe95178b01e4edac000002800390038003500160013000a00330032002f000500040015001200090014001100080006000300ff020100000400230000 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x0892c5e18f0c208992ade2392662cb3e server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 2 length 105 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 95 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 005a], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 03c6], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 62 to 10.10.10.248 port 20002 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xfaab6e6afe7983e3ceb172c2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf36b0c2ae35a91245e3660c64ffaedc Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=63, length=162 NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34226 State = 0xaf36b0c2ae35a91245e3660c64ffaedc EAP-Message = 0x020300061900 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0xe38005c4b1706e6a7e29a119271fbb9e server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 63 to 10.10.10.248 port 20002 EAP-Message = 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 EAP-Message = 0xf9fbfb95f4a13a08d42df26a32d8c926d3d72c0664126521b6c8bf232d5fd69e315a8851008003f9499c227efa3b95e285c45357685011aeb0beaa2c0422378382e88ee3f4258da149c67ce3e8584ef76f70ee947ab2da275ccf031e413417ab72d8889d93af4f1ca17a0c9a21a09147110d1fc789055030d32d86da39ba23c42ffb72b59d159bf5ec4172dc15965514614648754da6b0902e80b27a837b8918608e6d8e318516030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf36b0c2ad32a91245e3660c64ffaedc Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=64, length=364 NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34226 State = 0xaf36b0c2ad32a91245e3660c64ffaedc EAP-Message = 0x020400d01980000000c6160301008610000082008092b9a410e808d237744779f110f70552b38ec2d4dd188e21575b6d5f7cd22b1e6db23b4dda7b1cfb9b4a6772c0c03c5640162592d066de5a1bcb4b79e21a960fe4990db86f7e568f68050e56a3bc56b0c745068ad73fa850fc347a1eba7646e2294d733ced97b62ae5b7404dd98cf9df9d8f2596151f5298f2f4bdd099799ec51403010001011603010030df577db3d91d6a53405732e0a7eba3f6ab6cc4cf6552e5016328c539cf31f675ffd998f533fdd5093095bf248045b523 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0xf5d9553516cf0faaec30deb3e79c929f server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 4 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 64 to 10.10.10.248 port 20002 EAP-Message = 0x0105004119001403010001011603010030e4e932ca10085dc09c1bd1acfe0bdc87b26add99901309336399b1d80dbfbb63852a27a2e9c1675864720e1427e77fc3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf36b0c2ac33a91245e3660c64ffaedc Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=65, length=162 NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34226 State = 0xaf36b0c2ac33a91245e3660c64ffaedc EAP-Message = 0x020500061900 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0xbf3a9673681c3544660979bcfdd9b7c6 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 65 to 10.10.10.248 port 20002 EAP-Message = 0x0106002b19001703010020e87c17e1cbf292b1387072fbf82e0f8306925df48600f6024d353ad9f0515980 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf36b0c2ab30a91245e3660c64ffaedc Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=66, length=236 NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34226 State = 0xaf36b0c2ab30a91245e3660c64ffaedc EAP-Message = 0x0206005019001703010020b98b473f80dcbe37e138317408332995274dc8832866adbe5d4578824a37c13f1703010020f13c60a3f1a6e62bc66ffc2b4cd9be5d37bc5eb4e3a394945dce930a1710683a NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x8c20eac6c85651df81786df0a66c9542 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 6 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - root [peap] Got inner identity 'root' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0206000901726f6f74 server packetfence { [peap] Setting User-Name to root Sending tunneled request EAP-Message = 0x0206000901726f6f74 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "root" NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User NAS-Port = 34226 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" server packetfence-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence-tunnel +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server packetfence-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x0107001e1a0107001910fb87d2354d16a17ba3aa64af6c95fb27726f6f74 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6b88b6ab6b8facaa14b7c1873fd1677f [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x0107001e1a0107001910fb87d2354d16a17ba3aa64af6c95fb27726f6f74 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6b88b6ab6b8facaa14b7c1873fd1677f [peap] Got tunneled Access-Challenge ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 66 to 10.10.10.248 port 20002 EAP-Message = 0x0107004b190017030100405fec8f8ae5015542f5e084b6b4f67293733c2effe80335b42743c49489a6062d535d6117ce761ac83a5410e80e61932c3f93f9678abe00b4265416ca3be08e8e Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf36b0c2aa31a91245e3660c64ffaedc Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=67, length=300 NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34226 State = 0xaf36b0c2aa31a91245e3660c64ffaedc EAP-Message = 0x02070090190017030100206596115f207417624f7e845470af0daba727efb425ba1ff92e5a84387bce9dbb170301006074f16a40d50bc69b19aaedcb83bd9c7f621b74124c7931f77f8de496e0acc65855ed639549468d8c377d9fa5f38b6bef176bf360b3ce0680441a3cfd90303fd0761c3fa4ee743750b7a04401b06dbc39a90553bdb8b9c9d22ea0af456dfacd33 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x46167adc047836922a303f08d753acd6 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 7 length 144 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x0207003f1a0207003a310bda09a2bb62b8ca9a94e214e64373b20000000000000000c89da9ba6263f2d4df64b83fd944c0a92235c071adacb59400726f6f74 server packetfence { [peap] Setting User-Name to root Sending tunneled request EAP-Message = 0x0207003f1a0207003a310bda09a2bb62b8ca9a94e214e64373b20000000000000000c89da9ba6263f2d4df64b83fd944c0a92235c071adacb59400726f6f74 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "root" State = 0x6b88b6ab6b8facaa14b7c1873fd1677f NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User NAS-Port = 34226 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" server packetfence-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence-tunnel +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 63 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/raddb/sites-enabled/packetfence-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: root [mschap] Told to do MS-CHAPv2 for root with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server packetfence-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 67 to 10.10.10.248 port 20002 EAP-Message = 0x0108003b19001703010030d18b45652351f7055aa8417380e76fce9407bb8e74b1d976dd08afaef470ff74b1270a5c085e0741cee95216b810a5b7 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf36b0c2a93ea91245e3660c64ffaedc Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=68, length=252 NAS-Port-Id = "AP106/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-5D-44:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34226 State = 0xaf36b0c2a93ea91245e3660c64ffaedc EAP-Message = 0x0208006019001703010020b867c7f00506b3da75ae1601e918021a86f57769a75309e0fb9a3bab27747d01170301003043ca211c07014d4bb70d4cf6f6ef8a6a734c407f18a53e60231a8576d3be6a38093d4c8d9e955cf6f82095aca0af0849 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x959967d9d0f9546b78e7b41e418ebb0f server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 8 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. } # server packetfence Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> root attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 7 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 7 Sending Access-Reject of id 68 to 10.10.10.248 port 20002 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 0 ID 61 with timestamp +24 Cleaning up request 1 ID 62 with timestamp +24 Cleaning up request 2 ID 63 with timestamp +24 Cleaning up request 3 ID 64 with timestamp +24 Cleaning up request 4 ID 65 with timestamp +24 Cleaning up request 5 ID 66 with timestamp +24 Cleaning up request 6 ID 67 with timestamp +24 Waking up in 1.0 seconds. Cleaning up request 7 ID 68 with timestamp +24 Ready to process requests. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=69, length=146 NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User EAP-Message = 0x0201000901726f6f74 User-Name = "root" NAS-Port = 34227 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x0b98b579a67fd329b8eada71c739bd17 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 1 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop rlm_perl: Added pair NAS-Port-Type = Wireless-802.11 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Called-Station-Id = 00-1F-DA-26-13-84:SISD-Network rlm_perl: Added pair Calling-Station-Id = 00-16-EA-B9-D1-CC rlm_perl: Added pair Message-Authenticator = 0x0b98b579a67fd329b8eada71c739bd17 rlm_perl: Added pair User-Name = root rlm_perl: Added pair NAS-Identifier = nortel rlm_perl: Added pair EAP-Message = 0x0201000901726f6f74 rlm_perl: Added pair EAP-Type = Identity rlm_perl: Added pair NAS-Port = 34227 rlm_perl: Added pair NAS-IP-Address = 10.10.10.248 rlm_perl: Added pair NAS-Port-Id = AP10/1 rlm_perl: Added pair Auth-Type = EAP ++[perl] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 69 to 10.10.10.248 port 20002 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c55c4024c57ddad96cddff26bead54e Finished request 8. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=70, length=260 NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34227 State = 0x4c55c4024c57ddad96cddff26bead54e EAP-Message = 0x0202006919800000005f160301005a0100005603014edff0c206fa4aebac77ea7287a730712aa02a639261fb9263a31f4dba9570f500002800390038003500160013000a00330032002f000500040015001200090014001100080006000300ff020100000400230000 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x65754af26fd67660dc824381a2234e2c server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 2 length 105 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 95 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 005a], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 03c6], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 70 to 10.10.10.248 port 20002 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xfaab6e6afe7983e3ceb172c2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c55c4024d56ddad96cddff26bead54e Finished request 9. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=71, length=161 NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34227 State = 0x4c55c4024d56ddad96cddff26bead54e EAP-Message = 0x020300061900 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x9ebd80fc54e21300c0a0c31f86904746 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 71 to 10.10.10.248 port 20002 EAP-Message = 0x010401ac1900e7070bb109e432d02aff17160301018d0c0001890080ae1d1b6b98fc24a1c1a88fc0a5cc9336e32a91ffdbbd7cdda4254471177ebdcf5cb8290384e622ac3e1662827ca4de0c714f54f13a7312a947377cf1ffbd023973d0273d4639f3c6c40362daed439f6255cd2e0413361d5300867f69b4ab9dca321e2b78e7c8165b4e8fdbeca2553ff4863437af508d69005b120eaa588cf82300010200801e74524c3b3b710f2c47c5eaa13cb2e8ed528998e66944b2159ef2cbbc2b21895b51e3fbd1e93c2472be7d06356b6384bcaff0e11ca550299217a0f86b13ae783a0a7dba5f98d1462c1ed9a45a04199574cd3b626f0161a33131de6f EAP-Message = 0x75885183faccf5b044eb1d954ddabd1fcd4d14311bc82bfc2b5e2d1cd95b68c6288f374400807831af77278bd0b8487c1c60d50ede5c2ec2fbd25d49dec7c19d8cfa8e46d2479b221b7d5a70bd05605c30d8fdb3ba549b42d35969e24c7e6a406fc82d60892b44d6adee4c5191249dda21449bca7bc287c8669f2093b152f4f2b8c106bbb8d0d6016d5ae05036beda4dc63499631556bda3e6ebf0e212f3d6ca95a748127c6a16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c55c4024e51ddad96cddff26bead54e Finished request 10. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=72, length=363 NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34227 State = 0x4c55c4024e51ddad96cddff26bead54e EAP-Message = 0x020400d01980000000c616030100861000008200809707ada8891b5b8732d3e2e6559732053186f9906caa95a932f689aea84078bd551a4a2baa584897609c49fccf18bc33be35937af45b0d14ef022875b0476b38ea7bf21a008e759a80a09f0b3a4d29924ac4e1e99e927449c86087a548bcf7a092678598c01337502582d857e25516653b95288b7b04f9f34ff0dfae4faf40b514030100010116030100301a93526835d73374242910e3a1d44b77c8e1b4f07a71e1cdf93e8cdbef044ee21b5f77354378c203d53c1b6384766313 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x4573cb2feb18e1ae10b45140dfb491f0 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 4 length 208 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 198 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 72 to 10.10.10.248 port 20002 EAP-Message = 0x0105004119001403010001011603010030b7f2dda2141908d5c00b03a993ecf65d0e8276aeaa704260fdc3510379f0268dcdde58ee9c33dac7cbeaeea0a2d67583 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c55c4024f50ddad96cddff26bead54e Finished request 11. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=73, length=161 NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34227 State = 0x4c55c4024f50ddad96cddff26bead54e EAP-Message = 0x020500061900 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0xd00e6c4f35ab22f0edcef9c920f9a16e server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 5 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 73 to 10.10.10.248 port 20002 EAP-Message = 0x0106002b190017030100205512c1050028141dad167996c3a6213ffa391c6bd74751fe66b0e4ff7adc0cf3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c55c4024853ddad96cddff26bead54e Finished request 12. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=74, length=235 NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34227 State = 0x4c55c4024853ddad96cddff26bead54e EAP-Message = 0x020600501900170301002000f271c8996a0ca382e1f1b06f30848c5d9abfc6eee88c4e59fe2dcb6025d0ae17030100208db10d6e4050fa30653e9a7d3d4319ac5d8629475ba86712a3abd58204b85309 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x40afcade72b64e4ac74db86f50cf49f0 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 6 length 80 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - root [peap] Got inner identity 'root' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0206000901726f6f74 server packetfence { [peap] Setting User-Name to root Sending tunneled request EAP-Message = 0x0206000901726f6f74 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "root" NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User NAS-Port = 34227 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" server packetfence-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence-tunnel +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 9 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server packetfence-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x0107001e1a01070019103c00ea0133661772652dfb87862e4efd726f6f74 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfe4925f9fe4e3f08e2a0212b65b17789 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x0107001e1a01070019103c00ea0133661772652dfb87862e4efd726f6f74 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xfe4925f9fe4e3f08e2a0212b65b17789 [peap] Got tunneled Access-Challenge ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 74 to 10.10.10.248 port 20002 EAP-Message = 0x0107004b19001703010040d6434d09c133555bd4d8867f97f04b1963209c2643ae362557c20a6ebdc0903deff56d1dfb16bd0aa2c98a8568fccd2d9242ae292398f19acd4616129bca8687 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c55c4024952ddad96cddff26bead54e Finished request 13. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=75, length=283 NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34227 State = 0x4c55c4024952ddad96cddff26bead54e EAP-Message = 0x0207008019001703010020459b689e94fcfd2a88456d0ede1bab1721702871480871c66851ab0277cd9aad170301005017ff917d7bd7d65f4fac6bc5853dfc80aa95c3ec2695db019b324735ff3ebabf4cfe58c0af3b9267144f70adacd1f63c6dbbe8df1e9586949355c8e16e6294cadf57f022ed2bee71ae73d8b2b22936b1 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x246fc719dd9f9021625e84eacb4fbe15 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 7 length 128 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x0207003f1a0207003a311f382a1292c90e9994672e496c68b35900000000000000004570058d9c93331e2bb40eb615aebd08af8d2b07e989150b00726f6f74 server packetfence { [peap] Setting User-Name to root Sending tunneled request EAP-Message = 0x0207003f1a0207003a311f382a1292c90e9994672e496c68b35900000000000000004570058d9c93331e2bb40eb615aebd08af8d2b07e989150b00726f6f74 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "root" State = 0xfe4925f9fe4e3f08e2a0212b65b17789 NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User NAS-Port = 34227 NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" server packetfence-tunnel { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence-tunnel +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 63 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/raddb/sites-enabled/packetfence-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: root [mschap] Told to do MS-CHAPv2 for root with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server packetfence-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\007E=691 R=1" EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled } # server packetfence Sending Access-Challenge of id 75 to 10.10.10.248 port 20002 EAP-Message = 0x0108003b19001703010030f23ec13089472e78eb2bbf1832ccd10aacee066f33334760c631b443d839d475eeb2154f7fd7cfb7a8fc15d49c0f1726 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c55c4024a5dddad96cddff26bead54e Finished request 14. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.10.10.248 port 20002, id=76, length=251 NAS-Port-Id = "AP10/1" Calling-Station-Id = "00-16-EA-B9-D1-CC" Called-Station-Id = "00-1F-DA-26-13-84:SISD-Network" Service-Type = Framed-User User-Name = "root" NAS-Port = 34227 State = 0x4c55c4024a5dddad96cddff26bead54e EAP-Message = 0x0208006019001703010020d0a076e0886ed8f711e2d9f2db9c6a6771d313da2404188e915fda4f1037106f170301003027d03276b097f867ad673c482e27ab904084d0aaa8b5ca189cc35d2324a22d895883dae6632429c25bffb5dd5c9e7e6b NAS-Port-Type = Wireless-802.11 NAS-IP-Address = 10.10.10.248 NAS-Identifier = "nortel" Message-Authenticator = 0x58010b5c4b58602e6d1a9ee4ae7e4b38 server packetfence { # Executing section authorize from file /etc/raddb/sites-enabled/packetfence +- entering group authorize {...} [suffix] No '@' in User-Name = "root", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[preprocess] returns ok [eap] EAP packet type response id 8 length 96 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. } # server packetfence Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/packetfence +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> root attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 15 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 15 Sending Access-Reject of id 76 to 10.10.10.248 port 20002 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 8 ID 69 with timestamp +39 Cleaning up request 9 ID 70 with timestamp +39 Cleaning up request 10 ID 71 with timestamp +39 Cleaning up request 11 ID 72 with timestamp +39 Cleaning up request 12 ID 73 with timestamp +39 Cleaning up request 13 ID 74 with timestamp +39 Cleaning up request 14 ID 75 with timestamp +39 Waking up in 1.0 seconds. Cleaning up request 15 ID 76 with timestamp +39 Ready to process requests. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Getting-NT-STATUS-WRONG-PASSWORD-Wro... Sent from the FreeRadius - User mailing list archive at Nabble.com.