Wi-Fi Authentication on Active Directory

25 Oct 2013

      Hello everyone.
I'm trying to use FreeRADIUS 2.2.0 on Fedora 19 to authenticate Wi-Fi 
clients (Windows 7) against a MS Active Directory domain (Windows Server 
2008 R2). The access point is a MikroTik RouterOS v5.11. I've already 
joined the FreeRADIUS machine into my AD domain and both 'wbinfo -a' and 
'ntlm_auth' can successfully authenticate domain users. Then, I've 
followed the instructions on the Wiki for FreeRADIUS 2.x and set up the 
server accordingly. However, 'radiusd -X' tells that the Windows clients 
didn't reply the request and there's a url to the Wiki, explaining why 
it couldn't finish. The root and the client (self-signed) certificates 
are already installed on a test client, and I think I've created them 
following the recommended way (as told in README file on raddb/certs). 
I've checked the comments on raddb/eap.conf, but I'm not sure what to do 
next.

Is there some way to make the Windows clients trust the request?

The 'radiusd -X' output follows:

FreeRADIUS Version 2.2.0, for host i686-redhat-linux-gnu, built on Feb 
14 2013 at 18:27:55
Copyright (C) 1999-2012 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/soh
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/redis
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/replicate
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/cache
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/dhcp_sqlippool
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/opendirectory
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/dynamic_clients
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/radrelay
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/rediswho
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/control-socket
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
     user = "radiusd"
     group = "radiusd"
     allow_core_dumps = no
}
including dictionary file /etc/raddb/dictionary
main {
     name = "radiusd"
     prefix = "/usr"
     localstatedir = "/var"
     sbindir = "/usr/sbin"
     logdir = "/var/log/radius"
     run_dir = "/var/run/radiusd"
     libdir = "/usr/lib/freeradius"
     radacctdir = "/var/log/radius/radacct"
     hostname_lookups = no
     max_request_time = 30
     cleanup_delay = 5
     max_requests = 1024
     pidfile = "/var/run/radiusd/radiusd.pid"
     checkrad = "/usr/sbin/checkrad"
     debug_level = 0
     proxy_requests = yes
  log {
     stripped_names = no
     auth = no
     auth_badpass = no
     auth_goodpass = no
  }
  security {
     max_attributes = 200
     reject_delay = 1
     status_server = yes
  }
}
radiusd: #### Loading Realms and Home Servers ####
  proxy server {
     retry_delay = 5
     retry_count = 3
     default_fallback = no
     dead_time = 120
     wake_all_if_all_dead = no
  }
  home_server localhost {
     ipaddr = 127.0.0.1
     port = 1812
     type = "auth"
     secret = "testing123"
     response_window = 20
     max_outstanding = 65536
     require_message_authenticator = yes
     zombie_period = 40
     status_check = "status-server"
     ping_interval = 30
     check_interval = 30
     num_answers_to_alive = 3
     num_pings_to_alive = 3
     revive_interval = 120
     status_check_timeout = 4
   coa {
     irt = 2
     mrt = 16
     mrc = 5
     mrd = 30
   }
  }
  home_server_pool my_auth_failover {
     type = fail-over
     home_server = localhost
  }
  realm example.com {
     auth_pool = my_auth_failover
  }
  realm LOCAL {
  }
  realm MYDOMAIN {
  }
radiusd: #### Loading Clients ####
  client localhost {
     ipaddr = 127.0.0.1
     require_message_authenticator = no
     secret = "testing123"
     nastype = "other"
  }
  client 192.168.10.92 {
     require_message_authenticator = no
     secret = "testing123"
     shortname = "192.168.10.92"
  }
  client 192.168.10.94 {
     require_message_authenticator = no
     secret = "testing123"
     shortname = "192.168.10.94"
  }
  client 192.168.10.95 {
     require_message_authenticator = no
     secret = "testing123"
     shortname = "192.168.10.95"
  }
radiusd: #### Instantiating modules ####
  instantiate {
  Module: Linked to module rlm_exec
  Module: Instantiating module "exec" from file /etc/raddb/modules/exec
   exec {
     wait = no
     input_pairs = "request"
     shell_escape = yes
   }
  Module: Linked to module rlm_expr
  Module: Instantiating module "expr" from file /etc/raddb/modules/expr
  Module: Linked to module rlm_expiration
  Module: Instantiating module "expiration" from file 
/etc/raddb/modules/expiration
   expiration {
     reply-message = "Password Has Expired  "
   }
  Module: Linked to module rlm_logintime
  Module: Instantiating module "logintime" from file 
/etc/raddb/modules/logintime
   logintime {
     reply-message = "You are calling outside your allowed timespan "
     minimum-timeout = 60
   }
  }
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
  modules {
   Module: Creating Auth-Type = ntlm_auth
   Module: Creating Auth-Type = digest
   Module: Creating Post-Auth-Type = REJECT
  Module: Checking authenticate {...} for more modules to load
  Module: Linked to module rlm_pap
  Module: Instantiating module "pap" from file /etc/raddb/modules/pap
   pap {
     encryption_scheme = "auto"
     auto_header = no
   }
  Module: Linked to module rlm_chap
  Module: Instantiating module "chap" from file /etc/raddb/modules/chap
  Module: Linked to module rlm_mschap
  Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap
   mschap {
     use_mppe = yes
     require_encryption = no
     require_strong = no
     with_ntdomain_hack = no
     allow_retry = yes
   }
  Module: Instantiating module "ntlm_auth" from file 
/etc/raddb/modules/ntlm_auth
   exec ntlm_auth {
     wait = yes
     program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYDOMAIN 
--username=%{mschap:User-Name} --password=%{User-Password}"
     input_pairs = "request"
     shell_escape = yes
   }
  Module: Linked to module rlm_digest
  Module: Instantiating module "digest" from file /etc/raddb/modules/digest
  Module: Linked to module rlm_unix
  Module: Instantiating module "unix" from file /etc/raddb/modules/unix
   unix {
     radwtmp = "/var/log/radius/radwtmp"
   }
  Module: Linked to module rlm_eap
  Module: Instantiating module "eap" from file /etc/raddb/eap.conf
   eap {
     default_eap_type = "peap"
     timer_expire = 60
     ignore_unknown_eap_types = no
     cisco_accounting_username_bug = no
     max_sessions = 4096
   }
  Module: Linked to sub-module rlm_eap_md5
  Module: Instantiating eap-md5
  Module: Linked to sub-module rlm_eap_leap
  Module: Instantiating eap-leap
  Module: Linked to sub-module rlm_eap_gtc
  Module: Instantiating eap-gtc
    gtc {
     challenge = "Password: "
     auth_type = "PAP"
    }
  Module: Linked to sub-module rlm_eap_tls
  Module: Instantiating eap-tls
    tls {
     rsa_key_exchange = no
     dh_key_exchange = yes
     rsa_key_length = 512
     dh_key_length = 512
     verify_depth = 0
     CA_path = "/etc/raddb/certs"
     pem_file_type = yes
     private_key_file = "/etc/raddb/certs/server.pem"
     certificate_file = "/etc/raddb/certs/server.pem"
     CA_file = "/etc/raddb/certs/ca.pem"
     private_key_password = "whatever"
     dh_file = "/etc/raddb/certs/dh"
     random_file = "/etc/raddb/certs/random"
     fragment_size = 1024
     include_length = yes
     check_crl = no
     cipher_list = "DEFAULT"
     cache {
     enable = no
     lifetime = 24
     max_entries = 255
     }
     verify {
     }
     ocsp {
     enable = no
     override_cert_url = yes
     url = "http://127.0.0.1/ocsp/"
     use_nonce = yes
     timeout = 0
     softfail = no
     }
    }
  Module: Linked to sub-module rlm_eap_ttls
  Module: Instantiating eap-ttls
    ttls {
     default_eap_type = "md5"
     copy_request_to_tunnel = no
     use_tunneled_reply = no
     virtual_server = "inner-tunnel"
     include_length = yes
    }
  Module: Linked to sub-module rlm_eap_peap
  Module: Instantiating eap-peap
    peap {
     default_eap_type = "mschapv2"
     copy_request_to_tunnel = no
     use_tunneled_reply = no
     proxy_tunneled_request_as_eap = yes
     virtual_server = "inner-tunnel"
     soh = no
    }
  Module: Linked to sub-module rlm_eap_mschapv2
  Module: Instantiating eap-mschapv2
    mschapv2 {
     with_ntdomain_hack = no
     send_error = no
    }
  Module: Checking authorize {...} for more modules to load
  Module: Linked to module rlm_preprocess
  Module: Instantiating module "preprocess" from file 
/etc/raddb/modules/preprocess
   preprocess {
     huntgroups = "/etc/raddb/huntgroups"
     hints = "/etc/raddb/hints"
     with_ascend_hack = no
     ascend_channels_per_line = 23
     with_ntdomain_hack = no
     with_specialix_jetstream_hack = no
     with_cisco_vsa_hack = no
     with_alvarion_vsa_hack = no
   }
reading pairlist file /etc/raddb/huntgroups
reading pairlist file /etc/raddb/hints
  Module: Linked to module rlm_realm
  Module: Instantiating module "suffix" from file /etc/raddb/modules/realm
   realm suffix {
     format = "suffix"
     delimiter = "@"
     ignore_default = no
     ignore_null = no
   }
  Module: Instantiating module "ntdomain" from file /etc/raddb/modules/realm
   realm ntdomain {
     format = "prefix"
     delimiter = "\"
     ignore_default = no
     ignore_null = no
   }
  Module: Linked to module rlm_files
  Module: Instantiating module "files" from file /etc/raddb/modules/files
   files {
     usersfile = "/etc/raddb/users"
     acctusersfile = "/etc/raddb/acct_users"
     preproxy_usersfile = "/etc/raddb/preproxy_users"
     compat = "no"
   }
reading pairlist file /etc/raddb/users
reading pairlist file /etc/raddb/acct_users
reading pairlist file /etc/raddb/preproxy_users
  Module: Checking preacct {...} for more modules to load
  Module: Linked to module rlm_acct_unique
  Module: Instantiating module "acct_unique" from file 
/etc/raddb/modules/acct_unique
   acct_unique {
     key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, 
NAS-Port"
   }
  Module: Checking accounting {...} for more modules to load
  Module: Linked to module rlm_detail
  Module: Instantiating module "detail" from file /etc/raddb/modules/detail
   detail {
     detailfile = 
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
     header = "%t"
     detailperm = 384
     dirperm = 493
     locking = no
     log_packet_header = no
   }
  Module: Linked to module rlm_attr_filter
  Module: Instantiating module "attr_filter.accounting_response" from 
file /etc/raddb/modules/attr_filter
   attr_filter attr_filter.accounting_response {
     attrsfile = "/etc/raddb/attrs.accounting_response"
     key = "%{User-Name}"
     relaxed = no
   }
reading pairlist file /etc/raddb/attrs.accounting_response
  Module: Checking session {...} for more modules to load
  Module: Linked to module rlm_radutmp
  Module: Instantiating module "radutmp" from file 
/etc/raddb/modules/radutmp
   radutmp {
     filename = "/var/log/radius/radutmp"
     username = "%{User-Name}"
     case_sensitive = yes
     check_with_nas = yes
     perm = 384
     callerid = yes
   }
  Module: Checking post-proxy {...} for more modules to load
  Module: Checking post-auth {...} for more modules to load
  Module: Instantiating module "attr_filter.access_reject" from file 
/etc/raddb/modules/attr_filter
   attr_filter attr_filter.access_reject {
     attrsfile = "/etc/raddb/attrs.access_reject"
     key = "%{User-Name}"
     relaxed = no
   }
reading pairlist file /etc/raddb/attrs.access_reject
  } # modules
} # server
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
  modules {
  Module: Checking authenticate {...} for more modules to load
  Module: Checking authorize {...} for more modules to load
  Module: Checking session {...} for more modules to load
  Module: Checking post-proxy {...} for more modules to load
  Module: Checking post-auth {...} for more modules to load
  } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
     type = "auth"
     ipaddr = *
     port = 0
}
listen {
     type = "acct"
     ipaddr = *
     port = 0
}
listen {
     type = "control"
  listen {
     socket = "/var/run/radiusd/radiusd.sock"
  }
}
listen {
     type = "auth"
     ipaddr = 127.0.0.1
     port = 18120
}
  ... adding new socket proxy address * port 44612
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server 
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

rad_recv: Access-Request packet from host 192.168.10.92 port 36028, 
id=76, length=262
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL"
     Acct-Session-Id = "82a0000d"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0D"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 
0x0201001e01686f73742f434f5449414e2e52494f534f46542e4c4f43414c
     Message-Authenticator = 0x31f444f7ce3c94af50d7c7b4a06f5722
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] EAP packet type response id 1 length 30
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. 
Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 76 to 192.168.10.92 port 36028
     EAP-Message = 0x010200061920
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xb43ea5ebb43cbce8a490d8f312508be4
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.10.92 port 32862, 
id=77, length=355
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL"
     State = 0xb43ea5ebb43cbce8a490d8f312508be4
     Acct-Session-Id = "82a0000d"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0D"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 
0x0202006919800000005f160301005a0100005603015260450c82c8023e5b9a1dfad11d801781ee3b6bf74b2b4f1cd0be7f49ca8e11000018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100
     Message-Authenticator = 0x568404fff20064c7e21b1a1d317ef843
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] EAP packet type response id 2 length 105
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
   TLS Length 95
[peap] Length Included
[peap] eaptls_verify returned 11
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 005a], ClientHello
[peap]     TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap]     TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 085e], Certificate
[peap]     TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap]     TLS_accept: SSLv3 write server done A
[peap]     TLS_accept: SSLv3 flush data
[peap]     TLS_accept: Need to read more data: SSLv3 read client 
certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 77 to 192.168.10.92 port 32862
     EAP-Message = 
0x0103040019c0000008a216030100310200002d03015260450ee0bea0b9257af2e18386eb9dc7c3e596222be5c5ebeb5370ddd74d8700002f000005ff01000100160301085e0b00085a0008570003a6308203a23082028aa003020102020101300d06092a864886f70d0101050500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c65204365727469666963617465204175
     EAP-Message = 
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
     EAP-Message = 
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
     EAP-Message = 
0x17bc693fcc992e1f7e096f2a92dff11892528c21f255b81752ee0c2a7d80461841e598a42ca069bbc4e197ade15cde2c74c7336bb401c7d7a6a2fc2665ece8b508de62989cd220d166fe82cef9b168b864ce820240df1feea527d81a0c2a630d6c27a74084c2de0c19619045d97d9b46a86b06ff01382853294cf41ab38a3782000eb240ee0c767f1e95254f7d6eda7f1eb660c6a8a28193996b6fcc427c8b625729335207b16f53686ff29831a0c4cf193954a07f55b6f39fae2c9c2856bab77054d40d3d8e1e10b58c87e359d68b5a136c228d47386b94e24f904b770bae180b52c43e44fee7d59f23fd62b3db90b4080e2d9d745a9bfc3072392906
     EAP-Message = 0x260004ab308204a73082038f
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xb43ea5ebb53dbce8a490d8f312508be4
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.10.92 port 50212, 
id=78, length=256
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL"
     State = 0xb43ea5ebb53dbce8a490d8f312508be4
     Acct-Session-Id = "82a0000d"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0D"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 0x020300061900
     Message-Authenticator = 0xcf9ce2da7e06592890d17f3dbfe2bd0b
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 78 to 192.168.10.92 port 50212
     EAP-Message = 
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
     EAP-Message = 
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
     EAP-Message = 
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
     EAP-Message = 
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
     EAP-Message = 0xb3388ab4c8799870
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xb43ea5ebb63abce8a490d8f312508be4
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.10.92 port 45199, 
id=79, length=256
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL"
     State = 0xb43ea5ebb63abce8a490d8f312508be4
     Acct-Session-Id = "82a0000d"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0D"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 0x020400061900
     Message-Authenticator = 0x697378bb0e1376f1314eb49334139908
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 79 to 192.168.10.92 port 45199
     EAP-Message = 
0x010500bc19000b99343f8be5bbbac504b964b7278214ef92146e2b531d6bb346fd4d3f3db01f2bbaf06338eebc4f3f95dd05afbde1bfea561612bcc0f38cf033161a29d8d3d153be349292571cda0fb68aaeb1f8d7b8a00433092281110715db379edfdcb52afb132d4eaad24bd8a76d8ecf4377dd24cfc4484d64966f87c601d5644f65791eb42b66ab4419db5c27e3649e81d4993dddf34b71b6339b6730dfd68cbad45e6f9daeb2704ae46a9331ca454e4016030100040e000000
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xb43ea5ebb73bbce8a490d8f312508be4
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.10.92 port 59033, 
id=80, length=256
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL"
     State = 0xb43ea5ebb73bbce8a490d8f312508be4
     Acct-Session-Id = "82a0000d"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0D"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 0x020500061900
     Message-Authenticator = 0xe471ede46d42d0a95cb4d67975c7d7a3
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] No '\' in User-Name = "host/WORKSTATION.MYDOMAIN.LOCAL", 
looking up realm NULL
[ntdomain] No such realm "NULL"
++[ntdomain] returns noop
[eap] EAP packet type response id 5 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 80 to 192.168.10.92 port 59033
     EAP-Message = 0x010600061900
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xb43ea5ebb038bce8a490d8f312508be4
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.10.92 port 35895, 
id=81, length=256
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "MYDOMAIN\\domainuser"
     Acct-Session-Id = "82a0000e"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0E"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 0x0201001b0152494f534f46545c6761627269656c2e636f7469616e
     Message-Authenticator = 0x3dee545b5b2331b44c04e4b80a7fc4f3
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "MYDOMAIN\domainuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] Looking up realm "MYDOMAIN" for User-Name = "MYDOMAIN\domainuser"
[ntdomain] Found realm "MYDOMAIN"
[ntdomain] Adding Stripped-User-Name = "domainuser"
[ntdomain] Adding Realm = "MYDOMAIN"
[ntdomain] Authentication realm is LOCAL.
++[ntdomain] returns ok
[eap] EAP packet type response id 1 length 27
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry DEFAULT at line 1
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user. 
Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 81 to 192.168.10.92 port 35895
     EAP-Message = 0x010200061920
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xac18ae1dac1ab77e24f513d206b33409
Finished request 5.
Going to the next request
Waking up in 4.3 seconds.
rad_recv: Access-Request packet from host 192.168.10.92 port 54020, 
id=82, length=352
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "MYDOMAIN\\domainuser"
     State = 0xac18ae1dac1ab77e24f513d206b33409
     Acct-Session-Id = "82a0000e"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0E"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 
0x0202006919800000005f160301005a0100005603015260450c0c7365e7b420a507dea053bea8d97f928dbc9719c628bedb2a3062c4000018002f00350005000ac013c014c009c00a003200380013000401000015ff01000100000a0006000400170018000b00020100
     Message-Authenticator = 0xcc87280fc3a3ed09d352553e603427ce
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "MYDOMAIN\domainuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] Looking up realm "MYDOMAIN" for User-Name = "MYDOMAIN\domainuser"
[ntdomain] Found realm "MYDOMAIN"
[ntdomain] Adding Stripped-User-Name = "domainuser"
[ntdomain] Adding Realm = "MYDOMAIN"
[ntdomain] Authentication realm is LOCAL.
++[ntdomain] returns ok
[eap] EAP packet type response id 2 length 105
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
   TLS Length 95
[peap] Length Included
[peap] eaptls_verify returned 11
[peap]     (other): before/accept initialization
[peap]     TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 005a], ClientHello
[peap]     TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap]     TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 085e], Certificate
[peap]     TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap]     TLS_accept: SSLv3 write server done A
[peap]     TLS_accept: SSLv3 flush data
[peap]     TLS_accept: Need to read more data: SSLv3 read client 
certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 82 to 192.168.10.92 port 54020
     EAP-Message = 
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
     EAP-Message = 
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
     EAP-Message = 
0xc4900fb83181037c138a7714ea79097b27bce6d19cb2786feb0eb892474b973ecfe7564f9f6952b4c33b5c60349000c27111746c5037f0b6f59395ae429a8fcfd1631b1d62d0d8e1bf50e65bf2f0140576954d284b742eaaba994fb602b78b3e972ced578c9800a88a357ebd4888e57d45bd504b3ce0d7565b11e3a1f654c8150626cd369d3282359ba545fb2ed6094b919f3fd46e2d21de9975bb830f845961a54c7f027016c83e3036e5d4989e544cf294590e91c4a3bff91915f485d5aeae062ae57d53314c6e890203010001a317301530130603551d25040c300a06082b06010505070301300d06092a864886f70d010105050003820101009905
     EAP-Message = 
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
     EAP-Message = 0x260004ab308204a73082038f
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xac18ae1dad1bb77e24f513d206b33409
Finished request 6.
Going to the next request
Waking up in 4.3 seconds.
rad_recv: Access-Request packet from host 192.168.10.92 port 54346, 
id=83, length=253
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "MYDOMAIN\\domainuser"
     State = 0xac18ae1dad1bb77e24f513d206b33409
     Acct-Session-Id = "82a0000e"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0E"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 0x020300061900
     Message-Authenticator = 0x61a87acdb9c5c971007e9121502a8aff
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "MYDOMAIN\domainuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] Looking up realm "MYDOMAIN" for User-Name = "MYDOMAIN\domainuser"
[ntdomain] Found realm "MYDOMAIN"
[ntdomain] Adding Stripped-User-Name = "domainuser"
[ntdomain] Adding Realm = "MYDOMAIN"
[ntdomain] Authentication realm is LOCAL.
++[ntdomain] returns ok
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 83 to 192.168.10.92 port 54346
     EAP-Message = 
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
     EAP-Message = 
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
     EAP-Message = 
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
     EAP-Message = 
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
     EAP-Message = 0xb3388ab4c8799870
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xac18ae1dae1cb77e24f513d206b33409
Finished request 7.
Going to the next request
Waking up in 4.3 seconds.
rad_recv: Access-Request packet from host 192.168.10.92 port 34882, 
id=84, length=253
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "MYDOMAIN\\domainuser"
     State = 0xac18ae1dae1cb77e24f513d206b33409
     Acct-Session-Id = "82a0000e"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0E"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 0x020400061900
     Message-Authenticator = 0xca1ae53f11c24a576535b3fa85897aff
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "MYDOMAIN\domainuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] Looking up realm "MYDOMAIN" for User-Name = "MYDOMAIN\domainuser"
[ntdomain] Found realm "MYDOMAIN"
[ntdomain] Adding Stripped-User-Name = "domainuser"
[ntdomain] Adding Realm = "MYDOMAIN"
[ntdomain] Authentication realm is LOCAL.
++[ntdomain] returns ok
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 84 to 192.168.10.92 port 34882
     EAP-Message = 
0x010500bc19000b99343f8be5bbbac504b964b7278214ef92146e2b531d6bb346fd4d3f3db01f2bbaf06338eebc4f3f95dd05afbde1bfea561612bcc0f38cf033161a29d8d3d153be349292571cda0fb68aaeb1f8d7b8a00433092281110715db379edfdcb52afb132d4eaad24bd8a76d8ecf4377dd24cfc4484d64966f87c601d5644f65791eb42b66ab4419db5c27e3649e81d4993dddf34b71b6339b6730dfd68cbad45e6f9daeb2704ae46a9331ca454e4016030100040e000000
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xac18ae1daf1db77e24f513d206b33409
Finished request 8.
Going to the next request
Waking up in 4.3 seconds.
rad_recv: Access-Request packet from host 192.168.10.92 port 46831, 
id=85, length=253
     Service-Type = Framed-User
     Framed-MTU = 1400
     User-Name = "MYDOMAIN\\domainuser"
     State = 0xac18ae1daf1db77e24f513d206b33409
     Acct-Session-Id = "82a0000e"
     Acct-Multi-Session-Id = 
"02-0C-42-6A-44-6C-F0-7B-CB-42-28-7E-82-A0-00-00-00-00-00-0E"
     Calling-Station-Id = "F0-7B-CB-42-28-7E"
     Called-Station-Id = "02-0C-42-6A-44-6C:CORP-WiFi"
     EAP-Message = 0x020500061900
     Message-Authenticator = 0xc12066f7e555aa8b79ae1f0104deaaec
     NAS-Identifier = "MikroTik"
     Mikrotik-Realm = "MYDOMAIN"
     NAS-IP-Address = 192.168.10.92
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "MYDOMAIN\domainuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[ntdomain] Looking up realm "MYDOMAIN" for User-Name = "MYDOMAIN\domainuser"
[ntdomain] Found realm "MYDOMAIN"
[ntdomain] Adding Stripped-User-Name = "domainuser"
[ntdomain] Adding Realm = "MYDOMAIN"
[ntdomain] Authentication realm is LOCAL.
++[ntdomain] returns ok
[eap] EAP packet type response id 5 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 85 to 192.168.10.92 port 46831
     EAP-Message = 0x010600061900
     Message-Authenticator = 0x00000000000000000000000000000000
     State = 0xac18ae1da81eb77e24f513d206b33409
Finished request 9.
Going to the next request
Waking up in 4.2 seconds.
Cleaning up request 0 ID 76 with timestamp +19
Cleaning up request 1 ID 77 with timestamp +19
Cleaning up request 2 ID 78 with timestamp +19
Cleaning up request 3 ID 79 with timestamp +19
Cleaning up request 4 ID 80 with timestamp +19
WARNING: 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0xb43ea5ebb038bce8 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Waking up in 0.5 seconds.
Cleaning up request 5 ID 81 with timestamp +19
Cleaning up request 6 ID 82 with timestamp +20
Cleaning up request 7 ID 83 with timestamp +20
Cleaning up request 8 ID 84 with timestamp +20
Cleaning up request 9 ID 85 with timestamp +20
WARNING: 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0xac18ae1da81eb77e did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING: 
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.

Wi-Fi Authentication on Active Directory

Bruno de Paula Larini