Hi, I work at a company with more than 300 APs and this number only increases. To permit each AP to connect to Freeradius, I've configured a specified VLAN with DHCPv4 and I've delivered to APs. The clients.conf has looked like this: client dhcp-aps { ipaddr = 10.20.0.0/20 secret = testing123 shortname = dhcp-aps nastype = other } But I would like to store the clients configuration on a LDAP base using radiusClient scheme where the radiusClientIdentifier is the AP's MAC address. Then I intend to configure dynamic clients to allow the same created network to use Freeradius, but it will use Called-Station-ID to auth the AP on LDAP. I've googled it and found it https://sourceforge.net/p/hotcakes/wiki/YfiTechDynamicClients/ using Freeradius 2.1.12. Not 3.x though. Is it possible? -- Igor Sousa