I would like to have some insight in using virtual servers. But I am really stuck at the point that if i use virtual server how will be the DB entry look like i.e radreply / radgroup reply ? As far i understand , the reply attributes with value should be available in the reply table which matches to those of the NAS. Regards Suman On Sun, Oct 9, 2011 at 4:32 PM, Alexandre Chapellon <a.chapellon@horoa.net>wrote:
I personnally use post-auth sections of each of my virtual server to send diffrenet attributes. I find It to be very clean way to achieve this.
regards
Le 08/10/2011 20:02, Wegener, Norbert a écrit :
The general idea is to setup a virtual server for each type of NAS and make sure, that every NAS is loaded into the correct virtual server.
With best regards,
------------------------------**------------------------------** ------------
Norbert Wegener Siemens IT Solutions and Services AIS MS NC PSU SDC Bruchstraße 5 45883 Gelsenkirchen, Germany Tel.: +49 (209) 94565716 Fax: +49 (201) 8165581284 mailto:norbert.wegener@atos.**net <norbert.wegener@atos.net>
Atos IT Solutions and Services GmbH; Geschäftsführung: Winfried Holz, Christian Oecking, Rainer-Christian Koppitz; Vorsitzender des Aufsichtsrats: Charles Dehelly; Sitz der Gesellschaft: München, Deutschland; Registergericht: München, HRB 184933. ------------------------------**------------------------------** ------------ *Von:* freeradius-users-bounces+**norbert.wegener=atos.net@** lists.freeradius.org <atos.net@lists.freeradius.org>[freeradius-users-bounces+ **norbert.wegener=atos.net@**lists.freeradius.org<atos.net@lists.freeradius.org>]" im Auftrag von "Suman Dash [sumandash@gmail.com] *Gesendet:* Samstag, 8. Oktober 2011 16:39 *Bis:* FreeRadius users mailing list *Betreff:* Dynamic Attributes Based on NAS Type !
Hi Everyone ... Currently i am planning to integrate freeradius with different NAS like Chillispot , Cisco etc and enable roaming users so that they can log in from any of the NAS.
As the reply items are different with different NAS , i am looking for ideas how to enable a single user to roam and connect from different NAS.
In my case i think static reply items are not possible per user wise or per groupwise so my question is what trick can be used to achieve the same.
I had not tried anything as i have no clue on the same so some highlights on the approach will be a good starting point for me.
Cheers Suman
- List info/subscribe/unsubscribe? See http://www.freeradius.org/** list/users.html <http://www.freeradius.org/list/users.html>
Alexandre Chapellon
Ingénierie des systèmes open sources et réseaux. Follow me on twitter: @alxgomz <http://www.twitter.com/**alxgomz<http://www.twitter.com/alxgomz>
- List info/subscribe/unsubscribe? See http://www.freeradius.org/** list/users.html <http://www.freeradius.org/list/users.html>