Hello, I am developing my freeradius server (version 1.1.2) to use it in a WPA wireless environment with EAP authentication. Until this moment (without EAP) the accounting information collected by freeradius is in the form: - detail-YYYYMMDD: Fri Oct 20 11:07:59 2006 User-Name = "<username>@<realm>" NAS-Port = 2161 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = X.X.X.X Class = 0x69636172756d Calling-Station-Id = "172.18.201.166" Acct-Status-Type = Start Acct-Session-Id = "15D003FA" Tunnel-Client-Endpoint:0 = "172.18.201.166" Acct-Authentic = RADIUS Acct-Delay-Time = 0 NAS-IP-Address = <nas IP address> NAS-Port-Type = Virtual Proxy-State = 0x323034 Client-IP-Address = <client ip address> Acct-Unique-Session-Id = "e43a1da655ba3ef3" Stripped-User-Name = "<username>" Realm = "<realm>" Timestamp = 1161335279 - auth-detail-YYYYMMDD: Packet-Type = Access-Request Fri Oct 20 11:10:14 2006 User-Name = "<username>@<realm>" User-Password = "190482" NAS-Identifier = "<nas id>" NAS-IP-Address = <nas ip> Proxy-State = 0x323433 Client-IP-Address = <client ip> But with EAP the files has the same form, but username is always "anonymous", because the real authentication is made through the tunnel connection. I want to know if there is any way to configure radius to log the real username instead of anonymous in the log files. Thanks. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 968367590 Fax: 968398337