Well, now you dont have any IP address in your accept packet. Not a problem if you are doing DHCP. Otherwise you need to return IP address, netmask, MTU, Service-Type, DNS servers etc. Leave that Framed-User DEFAULT entry alone - it should be there. You need to add stuff to your user config: testuser Cleartext-Password:=yourpassword Framed-IP-Address=1.2.3.4 Framed-MTU=yourMTU Framed-IP-Netmask=255.255.255.255 etc. Ivan Kalik Kalik Informatika ISP Dana 30/5/2007, "shantanu choudhary" <shantanu_843@yahoo.co.in> piše: --- snip ---
Sending Access-Accept of id 2 to 192.168.2.182 port 1028 EAP-Message = 0x03020004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "testuser" Finished request 1 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 1 with timestamp 465d506e Cleaning up request 1 ID 2 with timestamp 465d506e Nothing to do. Sleeping until we see a request.
it is sending ACCESS ACCEPT but no access reject or failure!!!! and when i try to check AP statistics from server it is showing an entry for AUTHENTICATION FAILURE!!!!!!!
sorry for disturbing u again n again but can u help me out???? please!! shantanu