i finally resolved the issue by doing this : Commenting out on /usr/share/radiusclient-ng/dictionary.microsoft #ATTRIBUTE MS-Secondary-NBNS-Server 31 ipaddr because this 31 is already in the /usr/share/radiusclient-ng/dictionary Restarted the pptp and freereadius, after that calling-station-id is popping up correctly in the detail accounting log. Hope this helps to others K On Fri, Jul 13, 2012 at 12:31 PM, madal 30 <madal30@hotmail.com> wrote:
Thanks Alan,
It must be, The missing information on my log are :
Acct-Status-Type = Alive Acct-Session-Time = 30600 Acct-Output-Octets = 169755195 Acct-Input-Octets = 52166343 Acct-Output-Packets = 214098 Acct-Input-Packets = 188732 Calling-Station-Id = ".212"
It could be the dictionary file (not sure) I copied from here : http://wiki.freeradius.org/PopTop#Setting-up-the-Poptop-server And, I have these line added in my dictonary file
INCLUDE /etc/radiusclient/dictionary.merit INCLUDE /etc/radiusclient/dictionary.microsoft
I saw the post, http://freeradius.1045715.n5.nabble.com/A-couple-of-questions-PoPToP-FreeRad... verified with all the dictonary and are correct.
M
Date: Thu, 12 Jul 2012 19:27:56 +0100 From: A.L.M.Buxey@lboro.ac.uk To: freeradius-users@lists.freeradius.org
Subject: Re: Calling station ID
Hi,
The radius server can only process on what the NAS sends it. Look at the NAS and configure the NAS to send the correct/full Calling-Station-Id.
Where I can Configure this (in which file ?)
no file ont he RADIUS server - as per the original info, this is something you need to configure on the NAS - eg on the access point. the RADIUS server is simply reporting what its being told. I suspect a buggy NAS
alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html