Hi, I have some strange problems with peap+mschap+AD I followed the howto on the wiki for AD but with no luck. When authenticating a user I'll get: ---- Info: ++[mschap] returns ok Debug: MSCHAP Success ---- So i assume that the auth. against AD is OK but then the inner tunnel does something.... } # server inner-tunnel Mon Apr 26 12:32:15 2010 : Info: [peap] Got tunneled reply code 11 EAP-Message = 0x010700331a0306002e533d35454536463235384339353037434438373938303137334434424545393533373537304537393443 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x55964b77549151644066a939db03f531 Mon Apr 26 12:32:15 2010 : Info: [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x010700331a0306002e533d35454536463235384339353037434438373938303137334434424545393533373537304537393443 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x55964b77549151644066a939db03f531 Mon Apr 26 12:32:15 2010 : Info: [peap] Got tunneled Access-Challenge Mon Apr 26 12:32:15 2010 : Info: ++[eap] returns handled Sending Access-Challenge of id 0 to 194.47.88.154 port 2051 EAP-Message = 0x0107005b19001703010050154c3b195ed5a3fa88fd21477529cf86ee7d1d98cf8eb918036ac8aa14cd6f8c66a1836e9ab27087ad7df766d20447dbce1247b6a9ccf6b4376d854978db210db60f9b3578592123a4c5d43a205e8f79 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x3b975d133d90441898602b7c0076958a Mon Apr 26 12:32:15 2010 : Info: Finished request 6. After that nothing happens. I'm using: FreeRADIUS Version 2.1.1 I have tried both OS X 10.6 and Ubuntu 10.04 clients I have tried changing AP from CISCO to a Linksys WRT-54GL with DD-WRT with no luck. Has anyone any idea on whats wrong? -- Aniss Nazerian, IT-Department, Linnaeus University Phone: +46-470-708183, E-mail:aniss.nazerian@vxu.se O< ascii ribbon campaign - stop html mail - www.asciiribbon.org