FilterID or Aruba-User-Role being returned for captive portal but not 802.1X authentication

11 Jan 2018

      I have a wireless lab with an Aruba 7005 Controller (ArubaOS 6.5.4.3), and
now FreeRADIUS 3.0.15. Client authentication succeeds for both 802.1X and
captive portal users. A rule at the controller that is supposed to assign
user role based on returned Filter-Id works for the captive portal / guest
users but not 802.1X users. Filter-Id = "labguest" but the assigned role is
the 802.1X default, "authenticated".

I posted the issue at https://stackoverflow.com/questions/47681051/server-
derived-role-based-on-filterid-using-freeradius-not-working

I simultaneously posted it on the Aruba Airheads blog at http://community.
arubanetworks.com/t5/Security/Server-derived-rule-using-
Filter-Id-from-FreeRADIUS-not-working/m-p/322046

With no resolution at either stackoverflow or Airheads, I opened an Aruba
TAC case. After some troubleshooting, the Aruba engineer asks:

"I would like to inform you that I went through the packet captures and I
have attached the screenshots from the same based on what we observed;
As seen in the CP-Accept screenshot, we see the Radius Accept, for when the
user was authenticating with Captive Portal. We see in the accept packet,
that the server is sending the attribute 'labguest' to the controller for
the user role to be assigned.
In the case of Dot1x-Accept screenshot, we do not see any attribute being
sent by the server in the accept packet for when the user was
authenticating with dot1x authentication.

Please check on the server end if we need to enable sending attribute for
MSCHAPv2 along with the PAP protocol, or if there are any specific
configurations on the server that are handling the attributes to be sent
based on the authentication type."

users file entry:
guest123    Cleartext-Password := guest123
    Service-Type = Framed-User,
    Framed-Filter-Id = labguest
#    Aruba-User-Role = labguest

freeradius -X >debug.txt (during 802.1X authentication)
FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/preprocess
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
 security {
     user = "freerad"
     group = "freerad"
     allow_core_dumps = no
 }
    name = "freeradius"
    prefix = "/usr"
    localstatedir = "/var"
    logdir = "/var/log/freeradius"
    run_dir = "/var/run/freeradius"
}
main {
    name = "freeradius"
    prefix = "/usr"
    localstatedir = "/var"
    sbindir = "/usr/sbin"
    logdir = "/var/log/freeradius"
    run_dir = "/var/run/freeradius"
    libdir = "/usr/lib/freeradius"
    radacctdir = "/var/log/freeradius/radacct"
    hostname_lookups = no
    max_request_time = 30
    cleanup_delay = 5
    max_requests = 16384
    pidfile = "/var/run/freeradius/freeradius.pid"
    checkrad = "/usr/sbin/checkrad"
    debug_level = 0
    proxy_requests = yes
 log {
     stripped_names = no
     auth = no
     auth_badpass = no
     auth_goodpass = no
     colourise = yes
     msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
     max_attributes = 200
     reject_delay = 1.000000
     status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
     retry_delay = 5
     retry_count = 3
     default_fallback = no
     dead_time = 120
     wake_all_if_all_dead = no
 }
 home_server localhost {
     ipaddr = 127.0.0.1
     port = 1812
     type = "auth"
     secret = <<< secret >>>
     response_window = 20.000000
     response_timeouts = 1
     max_outstanding = 65536
     zombie_period = 40
     status_check = "status-server"
     ping_interval = 30
     check_interval = 30
     check_timeout = 4
     num_answers_to_alive = 3
     revive_interval = 120
  limit {
      max_connections = 16
      max_requests = 0
      lifetime = 0
      idle_timeout = 0
  }
  coa {
      irt = 2
      mrt = 16
      mrc = 5
      mrd = 30
  }
 }
 home_server_pool my_auth_failover {
    type = fail-over
    home_server = localhost
 }
 realm example.com {
    auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
     ipaddr = 127.0.0.1
     require_message_authenticator = no
     secret = <<< secret >>>
     nas_type = "other"
     proto = "*"
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
 client localhost_ipv6 {
     ipv6addr = ::1
     require_message_authenticator = no
     secret = <<< secret >>>
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
 client 192.168.18.252/30 {
     require_message_authenticator = no
     secret = <<< secret >>>
     shortname = "controllers"
  limit {
      max_connections = 16
      lifetime = 0
      idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
192.168.18.252/30. Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
      radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
      filename = "/etc/passwd"
      format = "*User-Name:Crypt-Password:"
      delimiter = ":"
      ignore_nislike = no
      ignore_empty = yes
      allow_multiple_keys = no
      hash_size = 100
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
      normalise = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
      rcode = "reject"
      simulcount = 0
      mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
      rcode = "fail"
      simulcount = 0
      mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
      rcode = "ok"
      simulcount = 0
      mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
      rcode = "handled"
      simulcount = 0
      mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
      rcode = "invalid"
      simulcount = 0
      mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
      rcode = "userlock"
      simulcount = 0
      mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
      rcode = "notfound"
      simulcount = 0
      mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
      rcode = "noop"
      simulcount = 0
      mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
      rcode = "updated"
      simulcount = 0
      mpp = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
      wait = no
      input_pairs = "request"
      shell_escape = yes
      timeout = 10
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
      filename = "/var/log/freeradius/linelog"
      escape_filenames = no
      syslog_severity = "info"
      permissions = 384
      format = "This is a log message for %{User-Name}"
      reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
      filename = "/var/log/freeradius/linelog-accounting"
      escape_filenames = no
      syslog_severity = "info"
      permissions = 384
      format = ""
      reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
      default_eap_type = "md5"
      timer_expire = 60
      ignore_unknown_eap_types = no
      cisco_accounting_username_bug = no
      max_sessions = 16384
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file
/etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
      filename = "/var/log/freeradius/sradutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 420
      caller_id = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_date
  # Loading module "date" from file /etc/freeradius/mods-enabled/date
  date {
      format = "%b %e %Y %H:%M:%S %Z"
      utc = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/mods-enabled/replicate
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
      wait = yes
      program = "/bin/echo %{User-Name}"
      input_pairs = "request"
      output_pairs = "reply"
      shell_escape = yes
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
      use_mppe = yes
      require_encryption = no
      require_strong = no
      with_ntdomain_hack = yes
   passchange {
   }
      allow_retry = yes
      winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail auth_log {
      filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail reply_log {
      filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
      filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
      filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
      safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/Ã¤Ã©Ã¶Ã¼Ã Ã¢Ã¦Ã§Ã¨Ã©ÃªÃ«Ã®Ã¯Ã´Å“Ã¹Ã»Ã¼aÃ¿Ã„Ã‰Ã–ÃœÃŸÃ€Ã‚Ã†Ã‡ÃˆÃ‰ÃŠÃ‹ÃŽÃ
Ã”Å’Ã™Ã›ÃœÅ¸"
  }
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
      filename = "/var/log/freeradius/radutmp"
      username = "%{User-Name}"
      case_sensitive = yes
      check_with_nas = yes
      permissions = 384
      caller_id = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
      driver = "rlm_cache_rbtree"
      key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
      ttl = 15
      max_entries = 0
      epoch = 0
      add_stats = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  logintime {
      minimum_timeout = 60
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
      filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
      key = "%{Realm}"
      relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
      filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
      key = "%{Realm}"
      relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
      filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
      filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
      filename =
"/etc/freeradius/mods-config/attr_filter/accounting_response"
      key = "%{User-Name}"
      relaxed = no
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
      format = "prefix"
      delimiter = "/"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
      format = "suffix"
      delimiter = "@"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  realm realmpercent {
      format = "suffix"
      delimiter = "%"
      ignore_default = no
      ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
      format = "prefix"
      delimiter = "\\"
      ignore_default = no
      ignore_null = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loading module "ntlm_auth" from file
/etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
      wait = yes
      program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
      shell_escape = yes
  }
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
      filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
      header = "%t"
      permissions = 384
      locking = no
      escape_filenames = no
      log_packet_header = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
      dhcp = yes
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
      filename = "/etc/freeradius/mods-config/files/authorize"
      acctusersfile = "/etc/freeradius/mods-config/files/accounting"
      preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
  preprocess {
      huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
      hints = "/etc/freeradius/mods-config/preprocess/hints"
      with_ascend_hack = no
      ascend_channels_per_line = 23
      with_ntdomain_hack = no
      with_specialix_jetstream_hack = no
      with_cisco_vsa_hack = no
      with_alvarion_vsa_hack = no
  }
  instantiate {
  }
  # Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "reject" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
       challenge = "Password: "
       auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
       tls = "tls-common"
   }
   tls-config tls-common {
       verify_depth = 0
       ca_path = "/etc/freeradius/certs"
       pem_file_type = yes
       private_key_file = "/etc/freeradius/certs/server.pem"
       certificate_file = "/etc/freeradius/certs/server.pem"
       ca_file = "/etc/freeradius/certs/ca.pem"
       private_key_password = <<< secret >>>
       dh_file = "/etc/freeradius/certs/dh"
       fragment_size = 1024
       include_length = yes
       auto_chain = yes
       check_crl = no
       check_all_crl = no
       cipher_list = "DEFAULT"
       cipher_server_preference = no
       ecdh_curve = "prime256v1"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
       tls = "tls-common"
       default_eap_type = "md5"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       virtual_server = "inner-tunnel"
       include_length = yes
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
       tls = "tls-common"
       default_eap_type = "mschapv2"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       proxy_tunneled_request_as_eap = yes
       virtual_server = "inner-tunnel"
       soh = no
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
       with_ntdomain_hack = no
       send_error = no
   }
  # Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Instantiating module "mschap" from file
/etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay"     found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec"     found in filter list for realm
"DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
  # Instantiating module "IPASS" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "detail" from file
/etc/freeradius/mods-enabled/detail
  # Instantiating module "files" from file
/etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/sites-enabled/inner-tunnel:331
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
      type = "auth"
      ipaddr = 127.0.0.1
      port = 18120
}
listen {
      type = "auth"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipaddr = *
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "auth"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
      type = "acct"
      ipv6addr = ::
      port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 52175
Listening on proxy address :: port 58823
Ready to process requests
(0) Received Access-Request Id 25 from 192.168.18.254:34699 to
192.168.18.249:1812 length 175
(0)   User-Name = "guest123"
(0)   NAS-IP-Address = 192.168.18.254
(0)   NAS-Port = 0
(0)   NAS-Identifier = "192.168.18.254"
(0)   NAS-Port-Type = Wireless-802.11
(0)   Calling-Station-Id = "FCC2DE13D615"
(0)   Called-Station-Id = "000B86BE91F0"
(0)   Service-Type = Framed-User
(0)   Framed-MTU = 1100
(0)   EAP-Message = 0x0201000d016775657374313233
(0)   Aruba-Essid-Name = "Lab-Emp"
(0)   Aruba-Location-Id = "AP2"
(0)   Aruba-AP-Group = "Lab1"
(0)   Message-Authenticator = 0x925f4bb690888ecfb2ed0712e9dc2763
(0) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 13
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 22
(0) eap: EAP session adding &reply:State = 0x2724385327263c5e
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 25 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(0)   EAP-Message = 0x010200160410be92f80cde14421822c7aef9cddd92ad
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x2724385327263c5e98ac8b27aec7a2e9
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 26 from 192.168.18.254:34699 to
192.168.18.249:1812 length 186
(1)   User-Name = "guest123"
(1)   NAS-IP-Address = 192.168.18.254
(1)   NAS-Port = 0
(1)   NAS-Identifier = "192.168.18.254"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Calling-Station-Id = "FCC2DE13D615"
(1)   Called-Station-Id = "000B86BE91F0"
(1)   Service-Type = Framed-User
(1)   Framed-MTU = 1100
(1)   EAP-Message = 0x020200060319
(1)   State = 0x2724385327263c5e98ac8b27aec7a2e9
(1)   Aruba-Essid-Name = "Lab-Emp"
(1)   Aruba-Location-Id = "AP2"
(1)   Aruba-AP-Group = "Lab1"
(1)   Message-Authenticator = 0x4811f18d2df2e85e6331dc9706d6339a
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1) files: users: Matched entry guest123 at line 83
(1)     [files] = ok
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x2724385327263c5e
(1) eap: Finished EAP session with state 0x2724385327263c5e
(1) eap: Previous EAP request found for state 0x2724385327263c5e, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0x272438532627215e
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 26 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(1)   Service-Type = Framed-User
(1)   Framed-Filter-Id = "labguest"
(1)   EAP-Message = 0x010300061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x272438532627215e98ac8b27aec7a2e9
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 27 from 192.168.18.254:34699 to
192.168.18.249:1812 length 348
(2)   User-Name = "guest123"
(2)   NAS-IP-Address = 192.168.18.254
(2)   NAS-Port = 0
(2)   NAS-Identifier = "192.168.18.254"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Calling-Station-Id = "FCC2DE13D615"
(2)   Called-Station-Id = "000B86BE91F0"
(2)   Service-Type = Framed-User
(2)   Framed-MTU = 1100
(2)   EAP-Message =
0x020300a819800000009e160301009901000095030351420a701c69b71e022bfefca1f2db978fea3b282c885e1fe769c98633b61bf200003cc02cc030009fc02bc02f009ec00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a00ff010000
(2)   State = 0x272438532627215e98ac8b27aec7a2e9
(2)   Aruba-Essid-Name = "Lab-Emp"
(2)   Aruba-Location-Id = "AP2"
(2)   Aruba-AP-Group = "Lab1"
(2)   Message-Authenticator = 0x4de1e143ed6f87e69dd173b1b6b9badf
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 168
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x272438532627215e
(2) eap: Finished EAP session with state 0x272438532627215e
(2) eap: Previous EAP request found for state 0x272438532627215e, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 158 bytes
(2) eap_peap: Got complete TLS record (158 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< recv TLS 1.2  [length 0099]
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.2  [length 0039]
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.2  [length 08d3]
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.2  [length 014d]
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.2  [length 0004]
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: TLS_accept: Need to read more data: unknown state
(2) eap_peap: TLS_accept: Need to read more data: unknown state
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0x272438532520215e
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 27 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(2)   EAP-Message =
0x010403ec19c000000a7116030300390200003503038b8c255d818236f426c1840ad18a511f5766971605f11426679da99674863f3900c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x272438532520215e98ac8b27aec7a2e9
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 28 from 192.168.18.254:34699 to
192.168.18.249:1812 length 186
(3)   User-Name = "guest123"
(3)   NAS-IP-Address = 192.168.18.254
(3)   NAS-Port = 0
(3)   NAS-Identifier = "192.168.18.254"
(3)   NAS-Port-Type = Wireless-802.11
(3)   Calling-Station-Id = "FCC2DE13D615"
(3)   Called-Station-Id = "000B86BE91F0"
(3)   Service-Type = Framed-User
(3)   Framed-MTU = 1100
(3)   EAP-Message = 0x020400061900
(3)   State = 0x272438532520215e98ac8b27aec7a2e9
(3)   Aruba-Essid-Name = "Lab-Emp"
(3)   Aruba-Location-Id = "AP2"
(3)   Aruba-AP-Group = "Lab1"
(3)   Message-Authenticator = 0x2599264e8586db5dae34da0eaef3289e
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x272438532520215e
(3) eap: Finished EAP session with state 0x272438532520215e
(3) eap: Previous EAP request found for state 0x272438532520215e, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 1000
(3) eap: EAP session adding &reply:State = 0x272438532421215e
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 28 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(3)   EAP-Message =
0x010503e81940b3464a51b48237f903c224328639e85e5b770170059dee2e5f6262ea8eaa176d0b7375178b2fc5e2982d52109a1d28afa041936bbde97f01eb488c556c3ad793a3c05c4ce03ec60a250004e8308204e4308203cca003020102020900ba4d5f67b91400f4300d06092a864886f70d01010b
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x272438532421215e98ac8b27aec7a2e9
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 29 from 192.168.18.254:34699 to
192.168.18.249:1812 length 186
(4)   User-Name = "guest123"
(4)   NAS-IP-Address = 192.168.18.254
(4)   NAS-Port = 0
(4)   NAS-Identifier = "192.168.18.254"
(4)   NAS-Port-Type = Wireless-802.11
(4)   Calling-Station-Id = "FCC2DE13D615"
(4)   Called-Station-Id = "000B86BE91F0"
(4)   Service-Type = Framed-User
(4)   Framed-MTU = 1100
(4)   EAP-Message = 0x020500061900
(4)   State = 0x272438532421215e98ac8b27aec7a2e9
(4)   Aruba-Essid-Name = "Lab-Emp"
(4)   Aruba-Location-Id = "AP2"
(4)   Aruba-AP-Group = "Lab1"
(4)   Message-Authenticator = 0x2a5dee3c82daff22fa3784aaa42efdeb
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x272438532421215e
(4) eap: Finished EAP session with state 0x272438532421215e
(4) eap: Previous EAP request found for state 0x272438532421215e, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 691
(4) eap: EAP session adding &reply:State = 0x272438532322215e
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 29 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(4)   EAP-Message =
0x010602b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010014ce6047b11dc0496a6a34b1f3816e18cd01ac2674bcff0a863e13c4e9cbfc
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x272438532322215e98ac8b27aec7a2e9
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 30 from 192.168.18.254:34699 to
192.168.18.249:1812 length 316
(5)   User-Name = "guest123"
(5)   NAS-IP-Address = 192.168.18.254
(5)   NAS-Port = 0
(5)   NAS-Identifier = "192.168.18.254"
(5)   NAS-Port-Type = Wireless-802.11
(5)   Calling-Station-Id = "FCC2DE13D615"
(5)   Called-Station-Id = "000B86BE91F0"
(5)   Service-Type = Framed-User
(5)   Framed-MTU = 1100
(5)   EAP-Message =
0x0206008819800000007e1603030046100000424104d0f9e8adeef83edd7b632876ad923ec186ae8b1e859ea4fa359dbd35de9642ba0f559498b3eddc2447904549bb594a13b88840d09e87251b5f80643854a7e2b614030300010116030300280000000000000000557431360d5361ce5e15b5371e31dd
(5)   State = 0x272438532322215e98ac8b27aec7a2e9
(5)   Aruba-Essid-Name = "Lab-Emp"
(5)   Aruba-Location-Id = "AP2"
(5)   Aruba-AP-Group = "Lab1"
(5)   Message-Authenticator = 0x3564ee1b45184fc438f8f3bdf1b1fe1b
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 136
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x272438532322215e
(5) eap: Finished EAP session with state 0x272438532322215e
(5) eap: Previous EAP request found for state 0x272438532322215e, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(5) eap_peap: Got complete TLS record (126 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< recv TLS 1.2  [length 0046]
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: <<< recv TLS 1.2  [length 0001]
(5) eap_peap: <<< recv TLS 1.2  [length 0010]
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: >>> send TLS 1.2  [length 0001]
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: >>> send TLS 1.2  [length 0010]
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: TLS_accept: unknown state
(5) eap_peap: (other): SSL negotiation finished successfully
(5) eap_peap: SSL Connection Established
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 7 length 57
(5) eap: EAP session adding &reply:State = 0x272438532223215e
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 30 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(5)   EAP-Message =
0x01070039190014030300010116030300289018523e94e9668064012fd528ca23ff74f19d11f0b81931e73f8f8196da044df416429f9ba7df00
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x272438532223215e98ac8b27aec7a2e9
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 31 from 192.168.18.254:34699 to
192.168.18.249:1812 length 186
(6)   User-Name = "guest123"
(6)   NAS-IP-Address = 192.168.18.254
(6)   NAS-Port = 0
(6)   NAS-Identifier = "192.168.18.254"
(6)   NAS-Port-Type = Wireless-802.11
(6)   Calling-Station-Id = "FCC2DE13D615"
(6)   Called-Station-Id = "000B86BE91F0"
(6)   Service-Type = Framed-User
(6)   Framed-MTU = 1100
(6)   EAP-Message = 0x020700061900
(6)   State = 0x272438532223215e98ac8b27aec7a2e9
(6)   Aruba-Essid-Name = "Lab-Emp"
(6)   Aruba-Location-Id = "AP2"
(6)   Aruba-AP-Group = "Lab1"
(6)   Message-Authenticator = 0x2d3960cecca5ad8f5711842e056644a8
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 6
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x272438532223215e
(6) eap: Finished EAP session with state 0x272438532223215e
(6) eap: Previous EAP request found for state 0x272438532223215e, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(6) eap_peap: [eaptls verify] = success
(6) eap_peap: [eaptls process] = success
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state TUNNEL ESTABLISHED
(6) eap: Sending EAP Request (code 1) ID 8 length 40
(6) eap: EAP session adding &reply:State = 0x27243853212c215e
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 31 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(6)   EAP-Message =
0x010800281900170303001d9018523e94e96681f327f9aab624fdd3fb220a996352a11c1c8bd3f09a
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x27243853212c215e98ac8b27aec7a2e9
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 32 from 192.168.18.254:34699 to
192.168.18.249:1812 length 224
(7)   User-Name = "guest123"
(7)   NAS-IP-Address = 192.168.18.254
(7)   NAS-Port = 0
(7)   NAS-Identifier = "192.168.18.254"
(7)   NAS-Port-Type = Wireless-802.11
(7)   Calling-Station-Id = "FCC2DE13D615"
(7)   Called-Station-Id = "000B86BE91F0"
(7)   Service-Type = Framed-User
(7)   Framed-MTU = 1100
(7)   EAP-Message =
0x0208002c190017030300210000000000000001baa0f292af6e46b9011ba57555d82552a599aa231fe0567668
(7)   State = 0x27243853212c215e98ac8b27aec7a2e9
(7)   Aruba-Essid-Name = "Lab-Emp"
(7)   Aruba-Location-Id = "AP2"
(7)   Aruba-AP-Group = "Lab1"
(7)   Message-Authenticator = 0x140fe08d897ef464a081fd62b9e1558a
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 44
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x27243853212c215e
(7) eap: Finished EAP session with state 0x27243853212c215e
(7) eap: Previous EAP request found for state 0x27243853212c215e, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(7) eap_peap: Identity - guest123
(7) eap_peap: Got inner identity 'guest123'
(7) eap_peap: Setting default EAP type for tunneled EAP session
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message = 0x0208000d016775657374313233
(7) eap_peap: Setting User-Name to guest123
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message = 0x0208000d016775657374313233
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "guest123"
(7) Virtual server inner-tunnel received request
(7)   EAP-Message = 0x0208000d016775657374313233
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "guest123"
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(7)     authorize {
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 13
(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(7)       [eap] = ok
(7)     } # authorize = ok
(7)   Found Auth-Type = eap
(7)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Peer sent packet with method EAP Identity (1)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: Issuing Challenge
(7) eap: Sending EAP Request (code 1) ID 9 length 43
(7) eap: EAP session adding &reply:State = 0x7e55fae97e5ce062
(7)       [eap] = handled
(7)     } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   EAP-Message =
0x0109002b1a010900261097922be676e49f82a77191d1f81936fd667265657261646975732d332e302e3135
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x7e55fae97e5ce062953a46e59f6aca5d
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap:   EAP-Message =
0x0109002b1a010900261097922be676e49f82a77191d1f81936fd667265657261646975732d332e302e3135
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x7e55fae97e5ce062953a46e59f6aca5d
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap:   EAP-Message =
0x0109002b1a010900261097922be676e49f82a77191d1f81936fd667265657261646975732d332e302e3135
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x7e55fae97e5ce062953a46e59f6aca5d
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 9 length 74
(7) eap: EAP session adding &reply:State = 0x27243853202d215e
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 32 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(7)   EAP-Message =
0x0109004a1900170303003f9018523e94e96682367ce8727a8a9e14ec67e81247024d824abd55a3221de0086eb247f7b416ddbd8ed22a6f89317e7c4d61b0683d1b443f5fbd77b63489e1
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x27243853202d215e98ac8b27aec7a2e9
(7) Finished request
Waking up in 4.9 seconds.
(8) Received Access-Request Id 33 from 192.168.18.254:34699 to
192.168.18.249:1812 length 278
(8)   User-Name = "guest123"
(8)   NAS-IP-Address = 192.168.18.254
(8)   NAS-Port = 0
(8)   NAS-Identifier = "192.168.18.254"
(8)   NAS-Port-Type = Wireless-802.11
(8)   Calling-Station-Id = "FCC2DE13D615"
(8)   Called-Station-Id = "000B86BE91F0"
(8)   Service-Type = Framed-User
(8)   Framed-MTU = 1100
(8)   EAP-Message =
0x020900621900170303005700000000000000025b07e90041ca58d369208d24becfafc781f48ac97a8d3bcf6af4da664b59c3089af6f9bf7e3a4fe2958ddeddcd36ecf109b4e876af1bc4ed0413a81043dea336a6dfdbc1f082c226aa82674d7f2760
(8)   State = 0x27243853202d215e98ac8b27aec7a2e9
(8)   Aruba-Essid-Name = "Lab-Emp"
(8)   Aruba-Location-Id = "AP2"
(8)   Aruba-AP-Group = "Lab1"
(8)   Message-Authenticator = 0x1494d4f4e6f96b9d38954a5858f21942
(8) session-state: No cached attributes
(8) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 98
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0x7e55fae97e5ce062
(8) eap: Finished EAP session with state 0x27243853202d215e
(8) eap: Previous EAP request found for state 0x27243853202d215e, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap:   EAP-Message =
0x020900431a0209003e31a6e58c71825a239eba1d236b87edfbaf0000000000000000a490586c52df19fb3daed0ff3c660c65f4a0e42deda644e4006775657374313233
(8) eap_peap: Setting User-Name to guest123
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap:   EAP-Message =
0x020900431a0209003e31a6e58c71825a239eba1d236b87edfbaf0000000000000000a490586c52df19fb3daed0ff3c660c65f4a0e42deda644e4006775657374313233
(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap:   User-Name = "guest123"
(8) eap_peap:   State = 0x7e55fae97e5ce062953a46e59f6aca5d
(8) Virtual server inner-tunnel received request
(8)   EAP-Message =
0x020900431a0209003e31a6e58c71825a239eba1d236b87edfbaf0000000000000000a490586c52df19fb3daed0ff3c660c65f4a0e42deda644e4006775657374313233
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "guest123"
(8)   State = 0x7e55fae97e5ce062953a46e59f6aca5d
(8) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(8) server inner-tunnel {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(8)     authorize {
(8)       policy filter_username {
(8)         if (&User-Name) {
(8)         if (&User-Name)  -> TRUE
(8)         if (&User-Name)  {
(8)           if (&User-Name =~ / /) {
(8)           if (&User-Name =~ / /)  -> FALSE
(8)           if (&User-Name =~ /@[^@]*@/ ) {
(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)           if (&User-Name =~ /\.\./ ) {
(8)           if (&User-Name =~ /\.\./ )  -> FALSE
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8)           if (&User-Name =~ /\.$/)  {
(8)           if (&User-Name =~ /\.$/)   -> FALSE
(8)           if (&User-Name =~ /@\./)  {
(8)           if (&User-Name =~ /@\./)   -> FALSE
(8)         } # if (&User-Name)  = notfound
(8)       } # policy filter_username = notfound
(8)       [chap] = noop
(8)       [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)       [suffix] = noop
(8)       update control {
(8)         &Proxy-To-Realm := LOCAL
(8)       } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 67
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8) files: users: Matched entry guest123 at line 83
(8)       [files] = ok
(8)       [expiration] = noop
(8)       [logintime] = noop
(8) pap: WARNING: Auth-Type already set.  Not setting to PAP
(8)       [pap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = eap
(8)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(8)     authenticate {
(8) eap: Expiring EAP session with state 0x7e55fae97e5ce062
(8) eap: Finished EAP session with state 0x7e55fae97e5ce062
(8) eap: Previous EAP request found for state 0x7e55fae97e5ce062, released
from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: # Executing group from file
/etc/freeradius/sites-enabled/inner-tunnel
(8) eap_mschapv2:   authenticate {
(8) mschap: Found Cleartext-Password, hashing to create NT-Password
(8) mschap: Found Cleartext-Password, hashing to create LM-Password
(8) mschap: Creating challenge hash with username: guest123
(8) mschap: Client is using MS-CHAPv2
(8) mschap: Adding MS-CHAPv2 MPPE keys
(8)     [mschap] = ok
(8)   } # authenticate = ok
(8) MSCHAP Success
(8) eap: Sending EAP Request (code 1) ID 10 length 51
(8) eap: EAP session adding &reply:State = 0x7e55fae97f5fe062
(8)       [eap] = handled
(8)     } # authenticate = handled
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8)   Service-Type = Framed-User
(8)   Framed-Filter-Id = "labguest"
(8)   EAP-Message =
0x010a00331a0309002e533d35333438383739343943363842353730453536434335453930373133303941383631384133353138
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x7e55fae97f5fe062953a46e59f6aca5d
(8) eap_peap: Got tunneled reply code 11
(8) eap_peap:   Service-Type = Framed-User
(8) eap_peap:   Framed-Filter-Id = "labguest"
(8) eap_peap:   EAP-Message =
0x010a00331a0309002e533d35333438383739343943363842353730453536434335453930373133303941383631384133353138
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   State = 0x7e55fae97f5fe062953a46e59f6aca5d
(8) eap_peap: Got tunneled reply RADIUS code 11
(8) eap_peap:   Service-Type = Framed-User
(8) eap_peap:   Framed-Filter-Id = "labguest"
(8) eap_peap:   EAP-Message =
0x010a00331a0309002e533d35333438383739343943363842353730453536434335453930373133303941383631384133353138
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   State = 0x7e55fae97f5fe062953a46e59f6aca5d
(8) eap_peap: Got tunneled Access-Challenge
(8) eap: Sending EAP Request (code 1) ID 10 length 82
(8) eap: EAP session adding &reply:State = 0x272438532f2e215e
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8)   Challenge { ... } # empty sub-section is ignored
(8) Sent Access-Challenge Id 33 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(8)   EAP-Message =
0x010a0052190017030300479018523e94e96683003a64f8c2fc607231faab888b7914d28511b61349fdf799e48fb5275a8279c3dad0dbfa972e89b71d70dd3b5f7f88fdabb45c2f7ed0eb35ff5458b62be6f3
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x272438532f2e215e98ac8b27aec7a2e9
(8) Finished request
Waking up in 4.9 seconds.
(9) Received Access-Request Id 34 from 192.168.18.254:34699 to
192.168.18.249:1812 length 217
(9)   User-Name = "guest123"
(9)   NAS-IP-Address = 192.168.18.254
(9)   NAS-Port = 0
(9)   NAS-Identifier = "192.168.18.254"
(9)   NAS-Port-Type = Wireless-802.11
(9)   Calling-Station-Id = "FCC2DE13D615"
(9)   Called-Station-Id = "000B86BE91F0"
(9)   Service-Type = Framed-User
(9)   Framed-MTU = 1100
(9)   EAP-Message =
0x020a00251900170303001a00000000000000031a0db7fef0d6affebf275ef50f7c34ccbe4e
(9)   State = 0x272438532f2e215e98ac8b27aec7a2e9
(9)   Aruba-Essid-Name = "Lab-Emp"
(9)   Aruba-Location-Id = "AP2"
(9)   Aruba-AP-Group = "Lab1"
(9)   Message-Authenticator = 0x2b3cc1b5e21a1cb3d3ccf39d0da2f8c1
(9) session-state: No cached attributes
(9) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(9)   authorize {
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = notfound
(9)     } # policy filter_username = notfound
(9)     [preprocess] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 10 length 37
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9)   authenticate {
(9) eap: Expiring EAP session with state 0x7e55fae97f5fe062
(9) eap: Finished EAP session with state 0x272438532f2e215e
(9) eap: Previous EAP request found for state 0x272438532f2e215e, released
from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established.  Decoding tunneled attributes
(9) eap_peap: PEAP state phase2
(9) eap_peap: EAP method MSCHAPv2 (26)
(9) eap_peap: Got tunneled request
(9) eap_peap:   EAP-Message = 0x020a00061a03
(9) eap_peap: Setting User-Name to guest123
(9) eap_peap: Sending tunneled request to inner-tunnel
(9) eap_peap:   EAP-Message = 0x020a00061a03
(9) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(9) eap_peap:   User-Name = "guest123"
(9) eap_peap:   State = 0x7e55fae97f5fe062953a46e59f6aca5d
(9) Virtual server inner-tunnel received request
(9)   EAP-Message = 0x020a00061a03
(9)   FreeRADIUS-Proxied-To = 127.0.0.1
(9)   User-Name = "guest123"
(9)   State = 0x7e55fae97f5fe062953a46e59f6aca5d
(9) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(9) server inner-tunnel {
(9)   session-state: No cached attributes
(9)   # Executing section authorize from file
/etc/freeradius/sites-enabled/inner-tunnel
(9)     authorize {
(9)       policy filter_username {
(9)         if (&User-Name) {
(9)         if (&User-Name)  -> TRUE
(9)         if (&User-Name)  {
(9)           if (&User-Name =~ / /) {
(9)           if (&User-Name =~ / /)  -> FALSE
(9)           if (&User-Name =~ /@[^@]*@/ ) {
(9)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)           if (&User-Name =~ /\.\./ ) {
(9)           if (&User-Name =~ /\.\./ )  -> FALSE
(9)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(9)           if (&User-Name =~ /\.$/)  {
(9)           if (&User-Name =~ /\.$/)   -> FALSE
(9)           if (&User-Name =~ /@\./)  {
(9)           if (&User-Name =~ /@\./)   -> FALSE
(9)         } # if (&User-Name)  = notfound
(9)       } # policy filter_username = notfound
(9)       [chap] = noop
(9)       [mschap] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(9) suffix: No such realm "NULL"
(9)       [suffix] = noop
(9)       update control {
(9)         &Proxy-To-Realm := LOCAL
(9)       } # update control = noop
(9) eap: Peer sent EAP Response (code 2) ID 10 length 6
(9) eap: No EAP Start, assuming it's an on-going EAP conversation
(9)       [eap] = updated
(9) files: users: Matched entry guest123 at line 83
(9)       [files] = ok
(9)       [expiration] = noop
(9)       [logintime] = noop
(9) pap: WARNING: Auth-Type already set.  Not setting to PAP
(9)       [pap] = noop
(9)     } # authorize = updated
(9)   Found Auth-Type = eap
(9)   # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(9)     authenticate {
(9) eap: Expiring EAP session with state 0x7e55fae97f5fe062
(9) eap: Finished EAP session with state 0x7e55fae97f5fe062
(9) eap: Previous EAP request found for state 0x7e55fae97f5fe062, released
from the list
(9) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(9) eap: Calling submodule eap_mschapv2 to process data
(9) eap: Sending EAP Success (code 3) ID 10 length 4
(9) eap: Freeing handler
(9)       [eap] = ok
(9)     } # authenticate = ok
(9)   # Executing section post-auth from file
/etc/freeradius/sites-enabled/inner-tunnel
(9)     post-auth {
(9)       if (0) {
(9)       if (0)  -> FALSE
(9)     } # post-auth = noop
(9) } # server inner-tunnel
(9) Virtual server sending reply
(9)   Service-Type = Framed-User
(9)   Framed-Filter-Id = "labguest"
(9)   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9)   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9)   MS-MPPE-Send-Key = 0x6b660abc849dd06d02c8666fb1df94e9
(9)   MS-MPPE-Recv-Key = 0x7fc0b21fdd0d434e44d71e1ecffa48d0
(9)   EAP-Message = 0x030a0004
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   User-Name = "guest123"
(9) eap_peap: Got tunneled reply code 2
(9) eap_peap:   Service-Type = Framed-User
(9) eap_peap:   Framed-Filter-Id = "labguest"
(9) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9) eap_peap:   MS-MPPE-Send-Key = 0x6b660abc849dd06d02c8666fb1df94e9
(9) eap_peap:   MS-MPPE-Recv-Key = 0x7fc0b21fdd0d434e44d71e1ecffa48d0
(9) eap_peap:   EAP-Message = 0x030a0004
(9) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap:   User-Name = "guest123"
(9) eap_peap: Got tunneled reply RADIUS code 2
(9) eap_peap:   Service-Type = Framed-User
(9) eap_peap:   Framed-Filter-Id = "labguest"
(9) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9) eap_peap:   MS-MPPE-Send-Key = 0x6b660abc849dd06d02c8666fb1df94e9
(9) eap_peap:   MS-MPPE-Recv-Key = 0x7fc0b21fdd0d434e44d71e1ecffa48d0
(9) eap_peap:   EAP-Message = 0x030a0004
(9) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap:   User-Name = "guest123"
(9) eap_peap: Tunneled authentication was successful
(9) eap_peap: SUCCESS
(9) eap: Sending EAP Request (code 1) ID 11 length 46
(9) eap: EAP session adding &reply:State = 0x272438532e2f215e
(9)     [eap] = handled
(9)   } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9)   Challenge { ... } # empty sub-section is ignored
(9) Sent Access-Challenge Id 34 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(9)   EAP-Message =
0x010b002e190017030300239018523e94e96684fda2acd46fa344dfb4bd6e9dc2819017927fe688abfe208a8d651f
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   State = 0x272438532e2f215e98ac8b27aec7a2e9
(9) Finished request
Waking up in 4.9 seconds.
(10) Received Access-Request Id 35 from 192.168.18.254:34699 to
192.168.18.249:1812 length 226
(10)   User-Name = "guest123"
(10)   NAS-IP-Address = 192.168.18.254
(10)   NAS-Port = 0
(10)   NAS-Identifier = "192.168.18.254"
(10)   NAS-Port-Type = Wireless-802.11
(10)   Calling-Station-Id = "FCC2DE13D615"
(10)   Called-Station-Id = "000B86BE91F0"
(10)   Service-Type = Framed-User
(10)   Framed-MTU = 1100
(10)   EAP-Message =
0x020b002e190017030300230000000000000004f146d1ea0f8955fd7d856784ab41de9850863bcbb43418d874af5a
(10)   State = 0x272438532e2f215e98ac8b27aec7a2e9
(10)   Aruba-Essid-Name = "Lab-Emp"
(10)   Aruba-Location-Id = "AP2"
(10)   Aruba-AP-Group = "Lab1"
(10)   Message-Authenticator = 0xc84dc673770cea5197b5288dd7635f1a
(10) session-state: No cached attributes
(10) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(10)   authorize {
(10)     policy filter_username {
(10)       if (&User-Name) {
(10)       if (&User-Name)  -> TRUE
(10)       if (&User-Name)  {
(10)         if (&User-Name =~ / /) {
(10)         if (&User-Name =~ / /)  -> FALSE
(10)         if (&User-Name =~ /@[^@]*@/ ) {
(10)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(10)         if (&User-Name =~ /\.\./ ) {
(10)         if (&User-Name =~ /\.\./ )  -> FALSE
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(10)         if (&User-Name =~ /\.$/)  {
(10)         if (&User-Name =~ /\.$/)   -> FALSE
(10)         if (&User-Name =~ /@\./)  {
(10)         if (&User-Name =~ /@\./)   -> FALSE
(10)       } # if (&User-Name)  = notfound
(10)     } # policy filter_username = notfound
(10)     [preprocess] = ok
(10)     [chap] = noop
(10)     [mschap] = noop
(10)     [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "guest123", looking up realm NULL
(10) suffix: No such realm "NULL"
(10)     [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 11 length 46
(10) eap: Continuing tunnel setup
(10)     [eap] = ok
(10)   } # authorize = ok
(10) Found Auth-Type = eap
(10) # Executing group from file /etc/freeradius/sites-enabled/default
(10)   authenticate {
(10) eap: Expiring EAP session with state 0x272438532e2f215e
(10) eap: Finished EAP session with state 0x272438532e2f215e
(10) eap: Previous EAP request found for state 0x272438532e2f215e, released
from the list
(10) eap: Peer sent packet with method EAP PEAP (25)
(10) eap: Calling submodule eap_peap to process data
(10) eap_peap: Continuing EAP-TLS
(10) eap_peap: [eaptls verify] = ok
(10) eap_peap: Done initial handshake
(10) eap_peap: [eaptls process] = ok
(10) eap_peap: Session established.  Decoding tunneled attributes
(10) eap_peap: PEAP state send tlv success
(10) eap_peap: Received EAP-TLV response
(10) eap_peap: Success
(10) eap: Sending EAP Success (code 3) ID 11 length 4
(10) eap: Freeing handler
(10)     [eap] = ok
(10)   } # authenticate = ok
(10) # Executing section post-auth from file
/etc/freeradius/sites-enabled/default
(10)   post-auth {
(10)     update {
(10)       No attributes updated
(10)     } # update = noop
(10)     [exec] = noop
(10)     policy remove_reply_message_if_eap {
(10)       if (&reply:EAP-Message && &reply:Reply-Message) {
(10)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(10)       else {
(10)         [noop] = noop
(10)       } # else = noop
(10)     } # policy remove_reply_message_if_eap = noop
(10)   } # post-auth = noop
(10) Sent Access-Accept Id 35 from 192.168.18.249:1812 to
192.168.18.254:34699 length 0
(10)   MS-MPPE-Recv-Key =
0x1898fd2108c78f60fdd3ebc6e998001935e960f785b5fcb3c1765ba0329c8b90
(10)   MS-MPPE-Send-Key =
0xb027c9455d30fd20e58e1db39bea514d5b5deee855e215b8485be483be3060da
(10)   EAP-Message = 0x030b0004
(10)   Message-Authenticator = 0x00000000000000000000000000000000
(10)   User-Name = "guest123"
(10) Finished request
Waking up in 4.8 seconds.
(0) Cleaning up request packet ID 25 with timestamp +22
(1) Cleaning up request packet ID 26 with timestamp +22
(2) Cleaning up request packet ID 27 with timestamp +22
(3) Cleaning up request packet ID 28 with timestamp +22
(4) Cleaning up request packet ID 29 with timestamp +22
(5) Cleaning up request packet ID 30 with timestamp +22
(6) Cleaning up request packet ID 31 with timestamp +22
(7) Cleaning up request packet ID 32 with timestamp +22
(8) Cleaning up request packet ID 33 with timestamp +22
(9) Cleaning up request packet ID 34 with timestamp +22
(10) Cleaning up request packet ID 35 with timestamp +22
Ready to process requests

FilterID or Aruba-User-Role being returned for captive portal but not 802.1X authentication

David Hendricks