FR2.1.7 with EAP-TTLS/PAP and LDAP

16 Nov 2009

      Hi all,

i followed the how-to steps from http://deployingradius.com/documents/configuration/setup.html
configured PAP, and EAP, made the certificates using the defaults in ./certs/bootstrap

Also: in the authenticate {} section from ./sites-available/default
Auth-Type LDAP {
		ldap
	}

other changes shouldnt be, i tried to make as little changes as necessary, hope i didnt blew it.....

i have a SUN station with Solaris 10, use Sun Directory Server for LDAP (passwords with SSHA) + freeRADIUS_v2.1.7

local test was successful (the last lines/attempt ), but when using the Xsupplicant windows client (the first attempt) connected to the Alcatel-Lucent OmniSwitch 6850 (as NAS client), it didnt as it returned failed to authenticate user.

Im thinking that maybe, i need to tweak something in the TTLS attributes, or make some changes in the inner-tunnel file
i have in TTLS section of eap.conf:
copy_request_to_tunnel = yes
use_tunneled_reply = yes

anyway, here is the log from radiusd -fX

$/usr/local/sbin/radiusd -fX
FreeRADIUS Version 2.1.7, for host sparc-sun-solaris2.10, built on Nov 12 2009 at 14:49:13
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/control-socket
including dictionary file /usr/local/etc/raddb/dictionary
main {
        prefix = "/usr/local"
        localstatedir = "/usr/local/var"
        logdir = "/usr/local/var/log/radius"
        libdir = "/usr/local/lib"
        radacctdir = "/usr/local/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        allow_core_dumps = no
        pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = "testing123"
        response_window = 20
        max_outstanding = 65536
        require_message_authenticator = no
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        num_pings_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "testing123"
        nastype = "other"
 }
 client switvh {
        ipaddr = 192.168.101.122
        require_message_authenticator = no
        secret = "challenge"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating pap
  pap {
        encryption_scheme = "auto"
        auto_header = yes
  }
 Module: Linked to module rlm_eap
 Module: Instantiating eap
  eap {
        default_eap_type = "ttls"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 2048
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        pem_file_type = yes
        private_key_file = "/usr/local/etc/raddb/certs/server.pem"
        certificate_file = "/usr/local/etc/raddb/certs/server.pem"
        CA_file = "/usr/local/etc/raddb/certs/ca.pem"
        private_key_password = "whatever"
        dh_file = "/usr/local/etc/raddb/certs/dh"
        random_file = "/usr/local/etc/raddb/certs/random"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
        make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
        default_eap_type = "md5"
        copy_request_to_tunnel = yes
        use_tunneled_reply = yes
        virtual_server = "inner-tunnel"
        include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
        with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating suffix
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating radutmp
  radutmp {
        filename = "/usr/local/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        perm = 384
        callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
        attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
        key = "%{User-Name}"
  }
 } # modules
} # server
server {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_chap
 Module: Instantiating chap
 Module: Linked to module rlm_mschap
 Module: Instantiating mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = no
  }
 Module: Linked to module rlm_unix
 Module: Instantiating unix
  unix {
        radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
 Module: Linked to module rlm_ldap
 Module: Instantiating ldap
  ldap {
        server = "host20"
        port = 389
        password = "ldaptest"
        identity = "cn=directory manager"
        net_timeout = 1
        timeout = 4
        timelimit = 3
        tls_mode = no
        start_tls = no
        tls_require_cert = "allow"
   tls {
        start_tls = no
        require_cert = "allow"
   }
        basedn = "dc=blackbox,dc=com"
        filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
        base_filter = "(objectclass=radiusprofile)"
        auto_header = no
        access_attr = "radiusFilterId"
        access_attr_used_for_allow = yes
        groupname_attribute = "cn"
        groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
        dictionary_mapping = "/usr/local/etc/raddb/ldap.attrmap"
        ldap_debug = 0
        ldap_connections_number = 5
        compare_check_items = no
        do_xlat = yes
        set_auth_type = yes
  }
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /usr/local/etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id
conns: 15e330
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating preprocess
  preprocess {
        huntgroups = "/usr/local/etc/raddb/huntgroups"
        hints = "/usr/local/etc/raddb/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating files
  files {
        usersfile = "/usr/local/etc/raddb/users"
        acctusersfile = "/usr/local/etc/raddb/acct_users"
        preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
        compat = "no"
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating acct_unique
  acct_unique {
        key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating detail
  detail {
        detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Instantiating attr_filter.accounting_response
  attr_filter attr_filter.accounting_response {
        attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
        key = "%{User-Name}"
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
listen {
        type = "control"
 listen {
        socket = "/usr/local/var/run/radiusd/radiusd.sock"
 }
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /usr/local/var/run/radiusd/radiusd.sock
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.101.122 port 1038, id=207, length=95
        User-Name = "testuser"
        NAS-IP-Address = 192.168.101.122
        NAS-Port = 1029
        NAS-Port-Type = Async
        Calling-Station-Id = "002186961979"
        EAP-Message = 0x0200000d017465737475736572
        Message-Authenticator = 0x17dcf8b04495aa1127dcc2f8d5c72633
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "testuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 13
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns updated
++[files] returns noop
[ldap] performing user authorization for testuser
[ldap]  expand: %{Stripped-User-Name} ->
[ldap]  expand: %{User-Name} -> testuser
[ldap]  expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=testuser)
[ldap]  expand: dc=blackbox,dc=com -> dc=blackbox,dc=com
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: attempting LDAP reconnection
rlm_ldap: (re)connect to host20:389, authentication 0
rlm_ldap: bind as cn=directory manager/ldaptest to host20:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
rlm_ldap: performing search in dc=blackbox,dc=com, with filter (uid=testuser)
[ldap] checking if remote access for testuser is allowed by radiusFilterId
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
rlm_ldap: radiusFilterId -> Filter-Id = "TunnelMgtGroup"
WARNING: No "known good" password was found in LDAP.  Are you sure that the user is configured correctly?
[ldap] user testuser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Found existing Auth-Type, not changing it.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 207 to 192.168.101.122 port 1038
        Filter-Id = "TunnelMgtGroup"
        EAP-Message = 0x010100061520
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x2e443a5b2e452f244b88bd87cfbeed10
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.101.122 port 1038, id=208, length=194
        User-Name = "testuser"
        NAS-IP-Address = 192.168.101.122
        State = 0x2e443a5b2e452f244b88bd87cfbeed10
        NAS-Port = 1029
        NAS-Port-Type = 1952805748
        Calling-Station-Id = "002186961979"
        EAP-Message = 0x0201005e150016030100530100004f03014b010a55a8baef6f4d89e1308789a1c87c08d79a72d9ceea5149be9db2a9119b00002800390038003500160013000a00330032002f000700050004001500120009001400110008000600030100
        Message-Authenticator = 0x95c0d5bf3dd1fed4dfc0a4a6e6b75484
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "testuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 94
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7
[ttls] Done initial handshake
[ttls]     (other): before/accept initialization
[ttls]     TLS_accept: before/accept initialization
[ttls] <<< TLS 1.0 Handshake [length 0053], ClientHello
[ttls]     TLS_accept: SSLv3 read client hello A
[ttls] >>> TLS 1.0 Handshake [length 002a], ServerHello
[ttls]     TLS_accept: SSLv3 write server hello A
[ttls] >>> TLS 1.0 Handshake [length 085e], Certificate
[ttls]     TLS_accept: SSLv3 write certificate A
[ttls] >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange
[ttls]     TLS_accept: SSLv3 write key exchange A
[ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[ttls]     TLS_accept: SSLv3 write server done A
[ttls]     TLS_accept: SSLv3 flush data
[ttls]     TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 208 to 192.168.101.122 port 1038
        EAP-Message = 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
        EAP-Message = 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
        EAP-Message = 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
        EAP-Message = 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
        EAP-Message = 0xa73082038fa0030201020209
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x2e443a5b2f462f244b88bd87cfbeed10
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.101.122 port 1038, id=209, length=106
        User-Name = "testuser"
        NAS-IP-Address = 192.168.101.122
        State = 0x2e443a5b2f462f244b88bd87cfbeed10
        NAS-Port = 1029
        NAS-Port-Type = 1952805748
        Calling-Station-Id = "002186961979"
        EAP-Message = 0x020200061500
        Message-Authenticator = 0xacfc7ec8e4c6ac2281265f4c44c81799
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "testuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] Received TLS ACK
[ttls] ACK handshake fragment handler
[ttls] eaptls_verify returned 1
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 209 to 192.168.101.122 port 1038
        EAP-Message = 0x0103040015c000000aad00afef2c6f3f033745300d06092a864886f70d0101050500308193310b3009060355040613024652310f300d060355040813065261646975733112301006035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d3039313131333136333331395a170d3130313131333136333331395a308193310b3009060355040613024652310f300d0603550408130652616469757331123010
        EAP-Message = 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
        EAP-Message = 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
        EAP-Message = 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
        EAP-Message = 0xee19ebfdebef449a1703937b
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x2e443a5b2c472f244b88bd87cfbeed10
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.101.122 port 1038, id=210, length=106
        User-Name = "testuser"
        NAS-IP-Address = 192.168.101.122
        State = 0x2e443a5b2c472f244b88bd87cfbeed10
        NAS-Port = 1029
        NAS-Port-Type = 1952805748
        Calling-Station-Id = "002186961979"
        EAP-Message = 0x020300061500
        Message-Authenticator = 0x27092cbd4483b560ad89cc86d1f9a680
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "testuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] Received TLS ACK
[ttls] ACK handshake fragment handler
[ttls] eaptls_verify returned 1
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 210 to 192.168.101.122 port 1038
        EAP-Message = 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
        EAP-Message = 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
        EAP-Message = 0x7e1227951007cdac5d199b0746aea78fb2fba5b01307c8cd346b595934e2a4779ce9a03efe7a1870bc634def1671590ce3e452b56a9d08a461b218203b729a90a5472d0e6db845f7fbbfe2d864a6237ada12322497c230b3d4906412e2f355eed6093074f88f93aadb40564676065fee4b948a185989bfa8c9b70ca1135f9d57ecd7eeb3dc496b0af4b378835fa733207f435999303605cba62a98306da28990132d355a72df0ed6d8e26cd5ec26ec9c17a5b90ca7ccc5ee3aff2770325adc614934fdd7fc4fa34b16030100040e000000
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x2e443a5b2d402f244b88bd87cfbeed10
Finished request 3.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.101.122 port 1038, id=211, length=304
        User-Name = "testuser"
        NAS-IP-Address = 192.168.101.122
        State = 0x2e443a5b2d402f244b88bd87cfbeed10
        NAS-Port = 1029
        NAS-Port-Type = 1952805748
        Calling-Station-Id = "002186961979"
        EAP-Message = 0x020400cc1500160301008610000082008023b18c87ede8bc2bb4a8a672c5d0eea801ed3c0387cb267c2aad9818ac37e2d579e28ab892c81f6bda34ccc6c889344255c65d7a03838484d5caac1ef0307a5f1ed94b4866353f1b6702d8f0f599df6dcd4adba524d133d53ae2b67ff9b651ae41491fd251bbea4337f4dadd85aca8f6669f3b73d98b951ddc7176b98867d5c31403010001011603010030944c712de57a29f7e302e0810bbf504cae5fa9f58982c2999808c548fbd357d4554935dd15cf4584f7c5eba4f2a215a8
        Message-Authenticator = 0xfedff7b67ed7cf2666247d94ba826121
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "testuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 204
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7
[ttls] Done initial handshake
[ttls] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
[ttls]     TLS_accept: SSLv3 read client key exchange A
[ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[ttls] <<< TLS 1.0 Handshake [length 0010], Finished
[ttls]     TLS_accept: SSLv3 read finished A
[ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[ttls]     TLS_accept: SSLv3 write change cipher spec A
[ttls] >>> TLS 1.0 Handshake [length 0010], Finished
[ttls]     TLS_accept: SSLv3 write finished A
[ttls]     TLS_accept: SSLv3 flush data
[ttls]     (other): SSL negotiation finished successfully
SSL Connection Established
[ttls] eaptls_process returned 13
++[eap] returns handled
Sending Access-Challenge of id 211 to 192.168.101.122 port 1038
        EAP-Message = 0x0105004515800000003b1403010001011603010030f13b13522c3fc7c89efb75bf7b81451eea7bfc61fc2c6ae4e7e0d1294feb0d4236cc981baa1c7929e1668ff46cb11eaf
        Message-Authenticator = 0x00000000000000000000000000000000
        State = 0x2e443a5b2a412f244b88bd87cfbeed10
Finished request 4.
Going to the next request
Waking up in 4.8 seconds.
rad_recv: Access-Request packet from host 192.168.101.122 port 1038, id=212, length=175
        User-Name = "testuser"
        NAS-IP-Address = 192.168.101.122
        State = 0x2e443a5b2a412f244b88bd87cfbeed10
        NAS-Port = 1029
        NAS-Port-Type = 1952805748
        Calling-Station-Id = "002186961979"
        EAP-Message = 0x0205004b15001703010040e65aa70b9d3bf376417c51aeabc0a4531b4a7b48a6cdbcc3c33ebf4ab249ac0f05e36c2d9d635cf333dbcf6aa59a75560a8fa6c5b35e434a2dd7917a65eabad6
        Message-Authenticator = 0x2b37b4e7b1362c43eacd53cd45abb630
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "testuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 75
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7
[ttls] Done initial handshake
[ttls] eaptls_process returned 7
[ttls] Session established.  Proceeding to decode tunneled attributes.
[ttls] Got tunneled request
        User-Name = "testuser"
        User-Password = "Secret149"
        FreeRADIUS-Proxied-To = 127.0.0.1
[ttls] Sending tunneled request
        User-Name = "testuser"
        User-Password = "Secret149"
        FreeRADIUS-Proxied-To = 127.0.0.1
        NAS-IP-Address = 192.168.101.122
        NAS-Port = 1029
        NAS-Port-Type = 1952805748
        Calling-Station-Id = "002186961979"
server inner-tunnel {
+- entering group authorize {...}
[suffix] No '@' in User-Name = "testuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
++[control] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[expiration] returns noop
++[logintime] returns noop
++[pap] returns noop
No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
Failed to authenticate the user.
} # server inner-tunnel
[ttls] Got tunneled reply code 3
[ttls] Got tunneled Access-Reject
[eap] Handler failed in EAP/ttls
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject]     expand: %{User-Name} -> testuser
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 5 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 5
Sending Access-Reject of id 212 to 192.168.101.122 port 1038
        EAP-Message = 0x04050004
        Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
Cleaning up request 0 ID 207 with timestamp +23
Cleaning up request 1 ID 208 with timestamp +23
Cleaning up request 2 ID 209 with timestamp +23
Cleaning up request 3 ID 210 with timestamp +23
Cleaning up request 4 ID 211 with timestamp +23
Waking up in 1.0 seconds.
Cleaning up request 5 ID 212 with timestamp +23
Ready to process requests.
# local test using: radtest testuser Secret149 localhost 0 testing123
rad_recv: Access-Request packet from host 127.0.0.1 port 45617, id=61, length=60
        User-Name = "testuser"
        User-Password = "Secret149"
        NAS-IP-Address = 192.168.101.122
        NAS-Port = 0
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "testuser", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[unix] returns updated
++[files] returns noop
[ldap] performing user authorization for testuser
[ldap]  expand: %{Stripped-User-Name} ->
[ldap]  expand: %{User-Name} -> testuser
[ldap]  expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=testuser)
[ldap]  expand: dc=blackbox,dc=com -> dc=blackbox,dc=com
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: performing search in dc=blackbox,dc=com, with filter (uid=testuser)
[ldap] checking if remote access for testuser is allowed by radiusFilterId
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
rlm_ldap: radiusFilterId -> Filter-Id = "TunnelMgtGroup"
WARNING: No "known good" password was found in LDAP.  Are you sure that the user is configured correctly?
[ldap] Setting Auth-Type = LDAP
[ldap] user testuser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] Found existing Auth-Type, not changing it.
++[pap] returns noop
Found Auth-Type = LDAP
+- entering group LDAP {...}
[ldap] login attempt by "testuser" with password "Secret149"
[ldap] user DN: uid=testuser,ou=People,dc=blackbox,dc=com
rlm_ldap: (re)connect to host20:389, authentication 1
rlm_ldap: bind as uid=testuser,ou=People,dc=blackbox,dc=com/Secret149 to host20:389
rlm_ldap: waiting for bind result ...
rlm_ldap: Bind was successful
[ldap] user testuser authenticated succesfully
++[ldap] returns ok
+- entering group post-auth {...}
++[exec] returns noop
Sending Access-Accept of id 61 to 127.0.0.1 port 45617
        Filter-Id = "TunnelMgtGroup"
Finished request 6.
Going to the next request
Waking up in 4.9 seconds.
Cleaning up request 6 ID 61 with timestamp +218
Ready to process requests.

thanks and best regards,
Caius Pargar