Hi all, I dont know why i can't login into the switch from Unix local user, Here the log from radius server... (The auth seem to be Successfully like the log tell.) rad_recv: Access-Request packet from host 192.168.1.210 port 2048, id=13, length=59 NAS-IP-Address = 192.168.1.210 User-Password = "********" Service-Type = Administrative-User User-Name = "francis" +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "francis", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns updated ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated rad_check_password: Found Auth-Type auth: type "PAP" +- entering group PAP rlm_pap: login attempt with password "***********" rlm_pap: Using CRYPT encryption. rlm_pap: User authenticated successfully ++[pap] returns ok Login OK: [francis/*********] (from client switch port 0) Sending Access-Accept of id 13 to 192.168.1.210 port 2048 Finished request 0. Going to the next request Waking up in 0.9 seconds. Waking up in 3.9 seconds. Cleaning up request 0 ID 13 with timestamp +970 Ready to process requests. Some one understand what is going wrong with this? Thanks for your help. Francis Provencher Ministère de la Sécurité publique du Québec Direction des technologies de l'information Division de la sécurité informatique Tél: 1 418 646-3258 BlackBery; 1 418 473 6419 Courriel: Francis.provencher@Msp.gouv.qc.ca CEH - Certified Ethical Hackers SSCP - System Security Certified Practitionner Sec+ - Security +