Hello All, I can seem to connect to the radius server, this is the error code: Anyone has a clue on what It could be? ........................................ Ready to process requests. User-Name = "Linux1" NAS-IP-Address = 10.0.0.197 Called-Station-Id = "00-20-a2-64-c3-b1:devnet" Calling-Station-Id = "00-0e-33-fe-3a-36;devnet" NAS-Identifier = "MVG-1" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020a000b014c696e757831 Message-Authenticator = 0x68a4345956d14cfdd678854f4c955ac7 +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "Linux1", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 10 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound users: Matched entry Linux1 at line 219 expand: Hello, %{User-Name} -> Hello, Linux1 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop rad_check_password: Found Auth-Type EAP auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Requiring client certificate rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 ++[eap] returns handled Reply-Message = "Hello, Linux1" EAP-Message = 0x010b00060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x84a6103884ad1d7df7f1c190d83cc59f Finished request 16. ........................................ The wpa_supplican.conf loks like this: network={ ssid="devnet" scan_ssid=1 key_mgmt=WPA-EAP pairwise=CCMP TKIP group=CCMP TKIP auth_alg=OPEN proto=RSN eap=TLS identity="Linux1" ca_cert="/Certs/ca.pem" client_cert="/Certs/client.pem" private_key="/Certs/client.pem" private_key_passwd="secret" } ........................................