Can you post the radius debug from the failed attempt. Ivan Kalik Kalik Informatika ISP Dana 24/6/2007, "emmcosta" <emmcosta@gmail.com> piše:
tnt@kalik.co.yu wrote:
And the problem is? Your request gets accepted and you do return VLAN attributes.
Ivan Kalik Kalik Informatika ISP
Dana 24/6/2007, "emmcosta" <emmcosta@gmail.com> piše:
A.L.M.Buxey@lboro.ac.uk wrote:
Hi,
See in attach naslist, clients.conf and radius -xx log.
you dont have 127.0.0.1 in your clients.conf
alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
I already add 127.0.0.1 im my clients.conf but I continue with the problem.
-- /emmc
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
I think that I know which is the problem, when I change configuration in my Cisco ap 1100 to this:
..................... dot11 ssid FONTELONGA vlan 2 authentication open eap eap_methods authentication key-management wpa accounting acct_methods
interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 2 mode ciphers tkip ! encryption mode ciphers tkip ! ssid FONTELONGA .........................
The authentication fail, but if I have change to this:
.............
dot11 ssid FONTELONGA vlan 2 authentication open eap eap_methods accounting acct_methods ...........
interface Dot11Radio0 no ip address no ip route-cache ! encryption mode wep optional ! encryption vlan 2 mode wep mandatory ! ssid FONTELONGA
............. the authentication is sucessefull.
Can you help-me, my Cisco Ap 1100 IOS version is 12.3(8)JA2.
-- /emmc