Dear Alan So here the issue is Freeradius or Win 7? I am not quite well understanding the log. If Win 10 and Android log in fine, I guess the issue is with Win 7 right? Or this has to do with setting up also MSCHAPv2 so Win7 can log in? Sorry but am really stuck and not even sure what to search on Google in order to get the help I need. Apologies for the million and one questions. Thanks for your support Matthew Pulis mobile / WhatsApp: +356 79539404 On 6 September 2017 at 10:09, Matthew Pulis <mpulis@gmail.com> wrote:
Resending since the other one was rejected for being long. Apologies
On 5 September 2017 at 22:19, Matthew Pulis <mpulis@gmail.com> wrote:
Dear all
Many many thanks for your support. We are moving towards a complete solution :)
Windows 10 works fine without the need to install a certificate. The certificates on the server were all expired so I renewed everything and Win 10 worked out of the box - no need to install anything.
Windows 7 is different. I pushed ca.der to the Win 7 client. Installed it using cert util and double checked it via mmc.
Before connecting this is the warning the network showed: The server "The Seminary Local Certificate Authority" presented a valid certificate issued by "The Seminary Local Certificate Authority", but "The Seminary Local Certificate Authority" is not configured as a valid trust anchor for this profile. Further, the server "The Seminary Local Certificate Authority" is not configured as a valid NPS server to connect to for this profile.
It seems to be a problem with Win 7. Do you have any pointers? Should I enable MSCHAPv2 too? or is there something for EAP please?
Should something like this work: https://documentation.me raki.com/MR/Encryption_and_Authentication/Enabling_EAP-TLS_in_Windows_7?
Thanks a lot for your help and support!
This is the full log
radius@radius:~$ sudo freeradius -X FreeRADIUS Version 3.0.15 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/adldap including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/ldap including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/replicate including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/moons hot-targeted-ids including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/operator-name including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.100.1/24 { require_message_authenticator = no secret = <<< secret >>> shortname = "NAS" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 192.168.100.1/24. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_ldap # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap ldap adldap { server = "localhost" identity = "cn=admin,dc=seminary,dc=local" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=School,dc=seminary,dc=ad" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute adldap-LDAP-Group # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/a lways always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/a lways always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/a lways always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/a lways always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/a lways always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/l ogintime logintime { minimum_timeout = 60 } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/r ealm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/r ealm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/d etail.log detail auth_log { filename = "/var/log/freeradius/radacct/% {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth- detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/d etail.log detail reply_log { filename = "/var/log/freeradius/radacct/% {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply -detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/% {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-p roxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/% {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post- proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzAB CDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆ ÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/n tlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "localhost" identity = "cn=admin,dc=seminary,dc=local" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=SeminaryOU,dc=seminary,dc=local" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/f iles/pre-proxy" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/p reprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/c ache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/% {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/e xpiration # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/s radutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "radutmp" from file /etc/freeradius/mods-enabled/r adutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/p asswd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/l inelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/a ttr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/a ttr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/a ttr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/r eplicate instantiate { } # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/m schap rlm_mschap (mschap): using internal authentication # Instantiating module "adldap" from file /etc/freeradius/mods-enabled/a dldap rlm_ldap: libldap vendor: OpenLDAP, version: 20442 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (adldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful # Instantiating module "reject" from file /etc/freeradius/mods-enabled/a lways # Instantiating module "fail" from file /etc/freeradius/mods-enabled/a lways # Instantiating module "ok" from file /etc/freeradius/mods-enabled/a lways # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/a lways # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/r ealm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/r ealm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/l dap accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "files" from file /etc/freeradius/mods-enabled/f iles reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/mods-enabled/d etail # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/at tr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/at tr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/at tr_filter/accounting_response } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/ inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 37387 Listening on proxy address :: port 45616 Ready to process requests
TRYING TO LOG IN FROM WINDOWS 7
(0) Received Access-Request Id 1 from 192.168.100.113:34296 to 192.168.100.201:1812 length 189 (0) User-Name = "bchristopher848" (0) NAS-IP-Address = 10.0.150.19 (0) NAS-Identifier = "802aa849d031" (0) NAS-Port = 0 (0) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (0) Calling-Station-Id = "00-22-FB-6E-1D-C8" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) EAP-Message = 0x0269001401626368726973746f70686572383438 (0) Message-Authenticator = 0x60dc6e98028e3f9af87c442e20dbd98b (0) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 105 length 20 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: Flushing SSL sessions (of #0) (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 106 length 6 (0) eap: EAP session adding &reply:State = 0xb5449406b52e8100 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Sent Access-Challenge Id 1 from 192.168.100.201:1812 to 192.168.100.113:34296 length 0 (0) EAP-Message = 0x016a00061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xb5449406b52e81001eb003264d869845 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 2 from 192.168.100.113:34296 to 192.168.100.201:1812 length 193 (1) User-Name = "bchristopher848" (1) NAS-IP-Address = 10.0.150.19 (1) NAS-Identifier = "802aa849d031" (1) NAS-Port = 0 (1) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (1) Calling-Station-Id = "00-22-FB-6E-1D-C8" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) EAP-Message = 0x026a00060319 (1) State = 0xb5449406b52e81001eb003264d869845 (1) Message-Authenticator = 0x9229ace477f82c7e771de427669cfad1 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 106 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (cn=bchristopher848) (1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=bchristopher848)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "cn=bchristopher848,cn=Seminar ians,ou=SeminaryOU,dc=seminary,dc=local" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/jwK 8GK5BxvANe+pK7w==' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated rlm_ldap (adldap): Reserved connection (0) (1) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (1) adldap: --> (cn=bchristopher848) (1) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter "(cn=bchristopher848)", scope "sub" (1) adldap: Waiting for search result... (1) adldap: The specified DN wasn't found (1) adldap: Search returned no results rlm_ldap (adldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (adldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful (1) [adldap] = notfound (1) [expiration] = noop (1) [logintime] = noop (1) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (1) pap: Removing &control:Password-With-Header (1) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xb5449406b52e8100 (1) eap: Finished EAP session with state 0xb5449406b52e8100 (1) eap: Previous EAP request found for state 0xb5449406b52e8100, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 107 length 6 (1) eap: EAP session adding &reply:State = 0xb5449406b42f8d00 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/sites-enabled/default (1) Sent Access-Challenge Id 2 from 192.168.100.201:1812 to 192.168.100.113:34296 length 0 (1) EAP-Message = 0x016b00061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xb5449406b42f8d001eb003264d869845 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 3 from 192.168.100.113:34296 to 192.168.100.201:1812 length 300 (2) User-Name = "bchristopher848" (2) NAS-IP-Address = 10.0.150.19 (2) NAS-Identifier = "802aa849d031" (2) NAS-Port = 0 (2) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (2) Calling-Station-Id = "00-22-FB-6E-1D-C8" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) EAP-Message = 0x026b007119800000006716030100 620100005e030159af03804becec9c3cef8903818c79121606d4cc4552b8 68a83f76270fc4ef9200001cc014c013003900330035002fc00ac0090038 0032000a00130005000401000019000a0006000400170018000b00020100 00170000ff01000100 (2) State = 0xb5449406b42f8d001eb003264d869845 (2) Message-Authenticator = 0x03f782e6095d0d07dc5d1122f1876d00 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 107 length 113 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xb5449406b42f8d00 (2) eap: Finished EAP session with state 0xb5449406b42f8d00 (2) eap: Previous EAP request found for state 0xb5449406b42f8d00, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 103 bytes (2) eap_peap: Got complete TLS record (103 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.0 Handshake [length 0062], ClientHello (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.0 Handshake [length 0059], ServerHello (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.0 Handshake [length 0982], Certificate (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: Need to read more data: unknown state (2) eap_peap: TLS_accept: Need to read more data: unknown state (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 108 length 1004 (2) eap: EAP session adding &reply:State = 0xb5449406b7288d00 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/sites-enabled/default (2) Sent Access-Challenge Id 3 from 192.168.100.201:1812 to 192.168.100.113:34296 length 0 (2) EAP-Message = 0x016c03ec19c000000b3e16030100 5902000055030198325853d6a4ea0a8a0ddc62e8252c55dce33ce836984b 265c5d4a2663c775ad20a5464acc7366d8b86f656371288daf4a0e68ce7f 820f064ff457b9622cb4e509c01400000dff01000100000b000403000102 16030109820b00097e00097b000426 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xb5449406b7288d001eb003264d869845 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 4 from 192.168.100.113:34296 to 192.168.100.201:1812 length 193 (3) User-Name = "bchristopher848" (3) NAS-IP-Address = 10.0.150.19 (3) NAS-Identifier = "802aa849d031" (3) NAS-Port = 0 (3) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (3) Calling-Station-Id = "00-22-FB-6E-1D-C8" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) EAP-Message = 0x026c00061900 (3) State = 0xb5449406b7288d001eb003264d869845 (3) Message-Authenticator = 0xe754c603a90fd754f21a295dadc62814 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 108 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xb5449406b7288d00 (3) eap: Finished EAP session with state 0xb5449406b7288d00 (3) eap: Previous EAP request found for state 0xb5449406b7288d00, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 109 length 1000 (3) eap: EAP session adding &reply:State = 0xb5449406b6298d00 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/sites-enabled/default (3) Sent Access-Challenge Id 4 from 192.168.100.201:1812 to 192.168.100.113:34296 length 0 (3) EAP-Message = 0x016d03e81940380fa68fefb0adb1 60bf876008cdd25df7f1bb575a26398125bf6a36bcf24e3cf136422c1048 b034887efbcce1ad27c885f67ae13c739af72b5bbff6b9f7cc41b9b006ed dd88d6cf5d54f66bb9884ac2f40853d3af5d741bb79faa72df0324c58d44 8bd2c5583caee59c318907018948f4 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xb5449406b6298d001eb003264d869845 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 5 from 192.168.100.113:34296 to 192.168.100.201:1812 length 193 (4) User-Name = "bchristopher848" (4) NAS-IP-Address = 10.0.150.19 (4) NAS-Identifier = "802aa849d031" (4) NAS-Port = 0 (4) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (4) Calling-Station-Id = "00-22-FB-6E-1D-C8" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) EAP-Message = 0x026d00061900 (4) State = 0xb5449406b6298d001eb003264d869845 (4) Message-Authenticator = 0x1308f82dd9c153d060e2d3f92f0e47c9 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 109 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xb5449406b6298d00 (4) eap: Finished EAP session with state 0xb5449406b6298d00 (4) eap: Previous EAP request found for state 0xb5449406b6298d00, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 110 length 896 (4) eap: EAP session adding &reply:State = 0xb5449406b12a8d00 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/sites-enabled/default (4) Sent Access-Challenge Id 5 from 192.168.100.201:1812 to 192.168.100.113:34296 length 0 (4) EAP-Message = 0x016e038019003081b5310b300906 0355040613024d543111300f06035504080c0849722d5261626174311230 1006035504070c0954616c2d566972747531223020060355040a0c195468 652041726368626973686f70732053656d696e6172792e3128302606092a 864886f70d0109011619746563686e (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xb5449406b12a8d001eb003264d869845 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 6 from 192.168.100.113:34296 to 192.168.100.201:1812 length 331 (5) User-Name = "bchristopher848" (5) NAS-IP-Address = 10.0.150.19 (5) NAS-Identifier = "802aa849d031" (5) NAS-Port = 0 (5) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (5) Calling-Station-Id = "00-22-FB-6E-1D-C8" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) EAP-Message = 0x026e009019800000008616030100 46100000424104f8835ccc6647e01b6ec2e669280021622082e4c4d31a30 ed462cac3b447792cb9763fb1c6f5547b7650c9216b8a36641f100200f17 d1246ba46fc9eb9cef2cbf140301000101160301003036330cfdd1b9bd52 1432d38a6be17cb4205d318a83802a (5) State = 0xb5449406b12a8d001eb003264d869845 (5) Message-Authenticator = 0x7e43591038f26410ddbfc952608bf3e1 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 110 length 144 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xb5449406b12a8d00 (5) eap: Finished EAP session with state 0xb5449406b12a8d00 (5) eap: Previous EAP request found for state 0xb5449406b12a8d00, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 134 bytes (5) eap_peap: Got complete TLS record (134 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (5) eap_peap: TLS_accept: unknown state (5) eap_peap: TLS_accept: unknown state (5) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished (5) eap_peap: TLS_accept: unknown state (5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_peap: TLS_accept: unknown state (5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished (5) eap_peap: TLS_accept: unknown state (5) eap_peap: TLS_accept: unknown state (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 111 length 65 (5) eap: EAP session adding &reply:State = 0xb5449406b02b8d00 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/sites-enabled/default (5) Sent Access-Challenge Id 6 from 192.168.100.201:1812 to 192.168.100.113:34296 length 0 (5) EAP-Message = 0x016f004119001403010001011603 01003094086787833117af433bc1c929281ae2f5f7cd6692f7cc59d0a0bf 65c818294d2b79cc16f11ac9f86e10a67a7fdb1a6b (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xb5449406b02b8d001eb003264d869845 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 7 from 192.168.100.113:34296 to 192.168.100.201:1812 length 193 (6) User-Name = "bchristopher848" (6) NAS-IP-Address = 10.0.150.19 (6) NAS-Identifier = "802aa849d031" (6) NAS-Port = 0 (6) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (6) Calling-Station-Id = "00-22-FB-6E-1D-C8" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) EAP-Message = 0x026f00061900 (6) State = 0xb5449406b02b8d001eb003264d869845 (6) Message-Authenticator = 0x89f89025177c0801e5cd47b689bb35ec (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 111 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xb5449406b02b8d00 (6) eap: Finished EAP session with state 0xb5449406b02b8d00 (6) eap: Previous EAP request found for state 0xb5449406b02b8d00, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 112 length 43 (6) eap: EAP session adding &reply:State = 0xb5449406b3348d00 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/sites-enabled/default (6) Sent Access-Challenge Id 7 from 192.168.100.201:1812 to 192.168.100.113:34296 length 0 (6) EAP-Message = 0x0170002b1900170301002091eabc 824030fa0d118d08413389ff5a78d63a9561aa4704edb36913865e9641 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xb5449406b3348d001eb003264d869845 (6) Finished request Waking up in 2.6 seconds. (7) Received Access-Request Id 8 from 192.168.100.113:34296 to 192.168.100.201:1812 length 246 (7) User-Name = "bchristopher848" (7) NAS-IP-Address = 10.0.150.19 (7) NAS-Identifier = "802aa849d031" (7) NAS-Port = 0 (7) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (7) Calling-Station-Id = "00-22-FB-6E-1D-C8" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) EAP-Message = 0x0270003b19001703010030c8fbf0 015e3e5a875a826ccd41cd45b083183d0fbf452e6e4ccdc2b10c2d758557 f2bf2ba865abb148620ece26115524 (7) State = 0xb5449406b3348d001eb003264d869845 (7) Message-Authenticator = 0x0ec21e66dd7cd4e0a4858c79afabd736 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 112 length 59 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xb5449406b3348d00 (7) eap: Finished EAP session with state 0xb5449406b3348d00 (7) eap: Previous EAP request found for state 0xb5449406b3348d00, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - bchristopher848 (7) eap_peap: Got inner identity 'bchristopher848' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0270001401626368726973746f70686572383438 (7) eap_peap: Setting User-Name to bchristopher848 (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0270001401626368726973746f70686572383438 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "bchristopher848" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0270001401626368726973746f70686572383438 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "bchristopher848" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 112 length 20 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/sites-enabled/ inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: Issuing Challenge (7) eap: Sending EAP Request (code 1) ID 113 length 43 (7) eap: EAP session adding &reply:State = 0x38f91b6e38880129 (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x0171002b1a01710026100f1b0f77 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x38f91b6e38880129b3a6b459c0f91610 (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x0171002b1a01710026100f1b0f77 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135 (7) eap_peap: Message-Authenticator = 0x0000000000000000000000000000 0000 (7) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610 (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x0171002b1a01710026100f1b0f77 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135 (7) eap_peap: Message-Authenticator = 0x0000000000000000000000000000 0000 (7) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610 (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 113 length 75 (7) eap: EAP session adding &reply:State = 0xb5449406b2358d00 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/sites-enabled/default (7) Sent Access-Challenge Id 8 from 192.168.100.201:1812 to 192.168.100.113:34296 length 0 (7) EAP-Message = 0x0171004b190017030100403a39fb 1bbb95a5bdae36dec7bbaf48cd6d67436cc6fa144c66482d9a55dee6efc1 22c2ae145e37423201a0becee44924132e0e197859e4e437513ae27427e3a6 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xb5449406b2358d001eb003264d869845 (7) Finished request Waking up in 2.6 seconds. (8) Received Access-Request Id 9 from 192.168.100.113:34296 to 192.168.100.201:1812 length 294 (8) User-Name = "bchristopher848" (8) NAS-IP-Address = 10.0.150.19 (8) NAS-Identifier = "802aa849d031" (8) NAS-Port = 0 (8) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (8) Calling-Station-Id = "00-22-FB-6E-1D-C8" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 0Mbps 802.11b" (8) EAP-Message = 0x0271006b19001703010060dc68da 606888205a8249468c13811c37cc426f2ad4ed4ed80b369f946ab0e0029d 069f9b903b244d4822ebf72b429433c990dcfef3af28b8871c7653e7c286 d1c4ad435ad1812458eaec44dc637bf173969928be0946944de2762170de365dc0 (8) State = 0xb5449406b2358d001eb003264d869845 (8) Message-Authenticator = 0xf489ba028df4298dc612460d97cc98ee (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 113 length 107 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x38f91b6e38880129 (8) eap: Finished EAP session with state 0xb5449406b2358d00 (8) eap: Previous EAP request found for state 0xb5449406b2358d00, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x0271004a1a027100453136aadef2 a35125429a547478d2433260000000000000000026bd920d94eca847c70d 9775f4afe71538b455e9932097c600626368726973746f70686572383438 (8) eap_peap: Setting User-Name to bchristopher848 (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x0271004a1a027100453136aadef2 a35125429a547478d2433260000000000000000026bd920d94eca847c70d 9775f4afe71538b455e9932097c600626368726973746f70686572383438 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "bchristopher848" (8) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610 (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x0271004a1a027100453136aadef2 a35125429a547478d2433260000000000000000026bd920d94eca847c70d 9775f4afe71538b455e9932097c600626368726973746f70686572383438 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "bchristopher848" (8) State = 0x38f91b6e38880129b3a6b459c0f91610 (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 113 length 74 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop rlm_ldap (ldap): Reserved connection (1) (8) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (8) ldap: --> (cn=bchristopher848) (8) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=bchristopher848)", scope "sub" (8) ldap: Waiting for search result... (8) ldap: User object found at DN "cn=bchristopher848,cn=Seminar ians,ou=SeminaryOU,dc=seminary,dc=local" (8) ldap: Processing user attributes (8) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/jwK 8GK5BxvANe+pK7w==' rlm_ldap (ldap): Released connection (1) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (8) [ldap] = updated rlm_ldap (adldap): Reserved connection (1) (8) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (8) adldap: --> (cn=bchristopher848) (8) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter "(cn=bchristopher848)", scope "sub" (8) adldap: Waiting for search result... (8) adldap: The specified DN wasn't found (8) adldap: Search returned no results rlm_ldap (adldap): Released connection (1) Need 4 more connections to reach 10 spares rlm_ldap (adldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful (8) [adldap] = notfound (8) [expiration] = noop (8) [logintime] = noop (8) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (8) pap: Removing &control:Password-With-Header (8) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (8) pap: WARNING: Auth-Type already set. Not setting to PAP (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/sites-enabled/ inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x38f91b6e38880129 (8) eap: Finished EAP session with state 0x38f91b6e38880129 (8) eap: Previous EAP request found for state 0x38f91b6e38880129, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (8) eap_mschapv2: Auth-Type MS-CHAP { (8) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (8) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (8) mschap: Creating challenge hash with username: bchristopher848 (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject (8) } # Auth-Type MS-CHAP = reject (8) eap: Sending EAP Failure (code 4) ID 113 length 4 (8) eap: Freeing handler (8) [eap] = reject (8) } # authenticate = reject (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/sites-enabled/ inner-tunnel (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> bchristopher848 (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) update outer.session-state { (8) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication' (8) } # update outer.session-state = noop (8) } # Post-Auth-Type REJECT = updated (8) } # server inner-tunnel (8) Virtual server sending reply (8) MS-CHAP-Error = "qE=691 R=1 C=523d66a28c934a7937a449415ae8f8ad V=3 M=Authentication failed" (8) EAP-Message = 0x04710004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply code 3 (8) eap_peap: MS-CHAP-Error = "qE=691 R=1 C=523d66a28c934a7937a449415ae8f8ad V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04710004 (8) eap_peap: Message-Authenticator = 0x0000000000000000000000000000 0000 (8) eap_peap: Got tunneled reply RADIUS code 3 (8) eap_peap: MS-CHAP-Error = "qE=691 R=1 C=523d66a28c934a7937a449415ae8f8ad V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04710004 (8) eap_peap: Message-Authenticator = 0x0000000000000000000000000000 0000 (8) eap_peap: Tunneled authentication was rejected (8) eap_peap: FAILURE (8) eap: Sending EAP Request (code 1) ID 114 length 43 (8) eap: EAP session adding &reply:State = 0xb5449406bd368d00 (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/freeradius/sites-enabled/default (8) session-state: Saving cached attributes (8) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (8) Sent Access-Challenge Id 9 from 192.168.100.201:1812 to 192.168.100.113:34296 length 0 (8) EAP-Message = 0x0172002b190017030100207447ef 7e889f505a2467ece5e23e6132aabd5ae2a2b62f44232ce0581e567dc8 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xb5449406bd368d001eb003264d869845 (8) Finished request Waking up in 2.6 seconds. (9) Received Access-Request Id 10 from 192.168.100.113:34296 to 192.168.100.201:1812 length 230 (9) User-Name = "bchristopher848" (9) NAS-IP-Address = 10.0.150.19 (9) NAS-Identifier = "802aa849d031" (9) NAS-Port = 0 (9) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" (9) Calling-Station-Id = "00-22-FB-6E-1D-C8" (9) Framed-MTU = 1400 (9) NAS-Port-Type = Wireless-802.11 (9) Connect-Info = "CONNECT 0Mbps 802.11b" (9) EAP-Message = 0x0272002b19001703010020c6855d 5f0630c6486963b3a872b1ce4479a9d9748bb1a8d28a488183707339de (9) State = 0xb5449406bd368d001eb003264d869845 (9) Message-Authenticator = 0xe32f0f6506920ee010991cab23cdc592 (9) Restoring &session-state (9) &session-state:Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (9) # Executing section authorize from file /etc/freeradius/sites-enabled/ default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 114 length 43 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xb5449406bd368d00 (9) eap: Finished EAP session with state 0xb5449406bd368d00 (9) eap: Previous EAP request found for state 0xb5449406bd368d00, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv failure (9) eap_peap: Received EAP-TLV response (9) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (9) eap_peap: This means you need to read the PREVIOUS messages in the debug output (9) eap_peap: to find out the reason why the user was rejected (9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (9) eap_peap: what went wrong, and how to fix the problem (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (9) eap: Sending EAP Failure (code 4) ID 114 length 4 (9) eap: Failed in EAP select (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /etc/freeradius/sites-enabled/default (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> bchristopher848 (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 10 from 192.168.100.201:1812 to 192.168.100.113:34296 length 44 (9) EAP-Message = 0x04720004 (9) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.6 seconds. (0) Cleaning up request packet ID 1 with timestamp +30 (1) Cleaning up request packet ID 2 with timestamp +30 (2) Cleaning up request packet ID 3 with timestamp +30 (3) Cleaning up request packet ID 4 with timestamp +30 (4) Cleaning up request packet ID 5 with timestamp +30 (5) Cleaning up request packet ID 6 with timestamp +30 Waking up in 2.2 seconds. (6) Cleaning up request packet ID 7 with timestamp +32 (7) Cleaning up request packet ID 8 with timestamp +32 (8) Cleaning up request packet ID 9 with timestamp +32 (9) Cleaning up request packet ID 10 with timestamp +32 Ready to process requests (10) Received Accounting-Request Id 1 from 192.168.100.115:52712 to 192.168.100.201:1813 length 90 (10) Acct-Status-Type = Accounting-Off (10) Acct-Authentic = RADIUS (10) NAS-IP-Address = 10.0.148.205 (10) NAS-Identifier = "802aa849cbcc" (10) Called-Station-Id = "80-2A-A8-4A-CB-CC:SeminaryWiFi" (10) Acct-Terminate-Cause = NAS-Reboot (10) # Executing section preacct from file /etc/freeradius/sites-enabled/ default (10) preacct { (10) [preprocess] = ok (10) policy acct_unique { (10) update request { (10) &Tmp-String-9 := "ai:" (10) } # update request = noop (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (10) EXPAND %{hex:&Class} (10) --> (10) EXPAND ^%{hex:&Tmp-String-9} (10) --> ^61693a (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (10) else { (10) update request { (10) EXPAND %{md5:%{User-Name},%{Acct-Sess ion-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS- Identifier},%{NAS-Port-ID},%{NAS-Port}} (10) --> 3fbd256e7d3667dda249cdebb204aa6c (10) &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa 6c (10) } # update request = noop (10) } # else = noop (10) } # policy acct_unique = noop (10) [suffix] = noop (10) [files] = noop (10) } # preacct = ok (10) # Executing section accounting from file /etc/freeradius/sites-enabled/default (10) accounting { (10) detail: EXPAND /var/log/freeradius/radacct/%{ %{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (10) detail: --> /var/log/freeradius/radacct/19 2.168.100.115/detail-20170905 (10) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pa cket-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.100.115/detail-20170905 (10) detail: EXPAND %t (10) detail: --> Tue Sep 5 22:05:39 2017 (10) [detail] = ok (10) [unix] = noop (10) [exec] = noop (10) attr_filter.accounting_response: EXPAND %{User-Name} (10) attr_filter.accounting_response: --> (10) [attr_filter.accounting_response] = noop (10) } # accounting = ok (10) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to 192.168.100.115:52712 length 0 (10) Finished request (10) Cleaning up request packet ID 1 with timestamp +44 Ready to process requests (11) Received Accounting-Request Id 1 from 192.168.100.115:41826 to 192.168.100.201:1813 length 90 (11) Acct-Status-Type = Accounting-Off (11) Acct-Authentic = RADIUS (11) NAS-IP-Address = 10.0.148.205 (11) NAS-Identifier = "802aa849cbcc" (11) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi" (11) Acct-Terminate-Cause = NAS-Reboot (11) # Executing section preacct from file /etc/freeradius/sites-enabled/ default (11) preacct { (11) [preprocess] = ok (11) policy acct_unique { (11) update request { (11) &Tmp-String-9 := "ai:" (11) } # update request = noop (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (11) EXPAND %{hex:&Class} (11) --> (11) EXPAND ^%{hex:&Tmp-String-9} (11) --> ^61693a (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (11) else { (11) update request { (11) EXPAND %{md5:%{User-Name},%{Acct-Sess ion-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS- Identifier},%{NAS-Port-ID},%{NAS-Port}} (11) --> 3fbd256e7d3667dda249cdebb204aa6c (11) &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa 6c (11) } # update request = noop (11) } # else = noop (11) } # policy acct_unique = noop (11) [suffix] = noop (11) [files] = noop (11) } # preacct = ok (11) # Executing section accounting from file /etc/freeradius/sites-enabled/default (11) accounting { (11) detail: EXPAND /var/log/freeradius/radacct/%{ %{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (11) detail: --> /var/log/freeradius/radacct/19 2.168.100.115/detail-20170905 (11) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pa cket-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.100.115/detail-20170905 (11) detail: EXPAND %t (11) detail: --> Tue Sep 5 22:05:40 2017 (11) [detail] = ok (11) [unix] = noop (11) [exec] = noop (11) attr_filter.accounting_response: EXPAND %{User-Name} (11) attr_filter.accounting_response: --> (11) [attr_filter.accounting_response] = noop (11) } # accounting = ok (11) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to 192.168.100.115:41826 length 0 (11) Finished request (11) Cleaning up request packet ID 1 with timestamp +45 Ready to process requests
Matthew Pulis mobile / WhatsApp: +356 79539404 <+356%207953%209404>