Hello All, I have been working on migrating my existing working config over to a server running Freeradius 3.0.0. The config was copied over by going through the config files line by line and inserting, no config file has been directly copied over. All is well until I try to authenticate against it. radiusd -X is ok, no errors. Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Opening new proxy address * port 1814 Listening on proxy address * port 1814 Ready to process requests. Then on authentication it crashes out: (11) eap : Tunneled authentication was successful. (11) eap : SUCCESS (11) eap : Saving tunneled attributes for later (11) eap : Reply was handled (11) eap : New EAP session, adding 'State' attribute to reply 0x39749cfb307e85b8 (11) [eap] = ok (11) } # post-proxy = ok Segmentation fault (core dumped) The system is Ubuntu 13.10 and freeradius was compiled using the following steps: tar -zxvf freeradius-server-3.0.0.tar.gz cd freeradius-server-3.0.0/ apt-get install gcc apt-get install make apt-get install libssl-dev apt-get install libtalloc-dev apt-get install libmysqlclient-dev ./configure --sysconfdir=/etc make make install Bertalan