Here is my debug now I might have to break it up into 2 posts though because of the size FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Mar 23 2011 at 11:28:44 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/control-socket main { allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.152.0.0/13 { require_message_authenticator = no secret = "centrino" shortname = "centrino" nastype = "aruba" } client 10.24.0.0/13 { require_message_authenticator = no secret = "centrino" shortname = "centrino" nastype = "aruba" } client 10.56.0.0/13 { require_message_authenticator = no secret = "centrino" shortname = "centrino" nastype = "aruba" } client 10.32.0.0/13 { require_message_authenticator = no secret = "centrino" shortname = "centrino" nastype = "aruba" } client 10.16.0.0/13 { require_message_authenticator = no secret = "centrino" shortname = "centrino" nastype = "aruba" } client 10.72.0.0/13 { require_message_authenticator = no secret = "centrino" shortname = "centrino" nastype = "aruba" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Instantiating module "ntdomain" from file /etc/raddb/modules/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap ldap { server = "172.17.152.4" port = 636 password = "xxxx" identity = "cn=admin,o=hpsd_48" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "o=hpsd_48" filter = "(uid=%{mschap:User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "nspmPassword" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = yes set_auth_type = no } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x819b1b8 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=100, length=207 User-Name = "host/TEST-11501.hpsd48.ab.ca" NAS-IP-Address = 10.152.0.100 NAS-Port = 1 NAS-Identifier = "10.152.0.100" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00265EE9B2CA" Called-Station-Id = "000B86611894" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0201002101686f73742f544553542d31313530312e6870736434382e61622e6361 Aruba-Essid-Name = "HPSD_RAD2" Aruba-Location-Id = "Tech 01" Message-Authenticator = 0x3fc51307320dc5715e92eecad18a7497 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 33 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for host/TEST-11501.hpsd48.ab.ca [ldap] expand: (uid=%{mschap:User-Name:-%{User-Name}}) -> (uid=TEST-11501$) [ldap] expand: o=hpsd_48 -> o=hpsd_48 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to 172.17.152.4:636, authentication 0 [ldap] setting TLS mode to 1 [ldap] bind as cn=admin,o=hpsd_48/xxxx to 172.17.152.4:636 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in o=hpsd_48, with filter (uid=TEST-11501$) [ldap] Added the eDirectory password xxxx in check items as Cleartext-Password [ldap] looking for check items in directory... [ldap] looking for reply items in directory... [ldap] user host/TEST-11501.hpsd48.ab.ca authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 100 to 10.152.0.100 port 32819 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x019a929401988b9c422c188eb1599474 Finished request 0. Going to the next request Waking up in 4.9 seconds. } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\010E=691 R=1" EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\010E=691 R=1" EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 107 to 10.152.0.100 port 32819 EAP-Message = 0x010900261900170301001bff964598d07d4dd0c38635418e6dc2288e2d28f07cdec632840d8d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x019a929406938b9c422c188eb1599474 Finished request 7. Going to the next request Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=108, length=230 User-Name = "host/TEST-11501.hpsd48.ab.ca" NAS-IP-Address = 10.152.0.100 NAS-Port = 1 NAS-Identifier = "10.152.0.100" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00265EE9B2CA" Called-Station-Id = "000B86611894" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020900261900170301001b484dac5941c9c6e1e6f5f65245aa4a15dadcff5adf50aa9a55e7a2 State = 0x019a929406938b9c422c188eb1599474 Aruba-Essid-Name = "HPSD_RAD2" Aruba-Location-Id = "Tech 01" Message-Authenticator = 0xe8ecd2a6e6c5d0e2d1748001c7e06674 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 38 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> host/TEST-11501.hpsd48.ab.ca attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 108 to 10.152.0.100 port 32819 EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=109, length=207 User-Name = "host/TEST-11501.hpsd48.ab.ca" NAS-IP-Address = 10.152.0.100 NAS-Port = 1 NAS-Identifier = "10.152.0.100" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00265EE9B2CA" Called-Station-Id = "000B86611894" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0201002101686f73742f544553542d31313530312e6870736434382e61622e6361 Aruba-Essid-Name = "HPSD_RAD2" Aruba-Location-Id = "Tech 01" Message-Authenticator = 0x853e6724620b407fe84ff5501ca8df01 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 33 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for host/TEST-11501.hpsd48.ab.ca [ldap] expand: (uid=%{mschap:User-Name:-%{User-Name}}) -> (uid=TEST-11501$) [ldap] expand: o=hpsd_48 -> o=hpsd_48 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in o=hpsd_48, with filter (uid=TEST-11501$) [ldap] Added the eDirectory password xxxx in check items as Cleartext-Password [ldap] looking for check items in directory... [ldap] looking for reply items in directory... [ldap] user host/TEST-11501.hpsd48.ab.ca authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 109 to 10.152.0.100 port 32819 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf0b06b8af091f13414e4025002a7e0a Finished request 9. Going to the next request Waking up in 3.4 seconds. rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=110, length=279 User-Name = "host/TEST-11501.hpsd48.ab.ca" NAS-IP-Address = 10.152.0.100 NAS-Port = 1 NAS-Identifier = "10.152.0.100" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00265EE9B2CA" Called-Station-Id = "000B86611894" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x0202005719800000004d16030100480100004403014de906da35a800084268cf2d0a7eafe7044381e765dfb217746f493469c8e29500001600040005000a0009006400620003000600130012006301000005ff01000100 State = 0xaf0b06b8af091f13414e4025002a7e0a Aruba-Essid-Name = "HPSD_RAD2" Aruba-Location-Id = "Tech 01" Message-Authenticator = 0xb5d520483b1671c6a09a1aae6bf8c27b # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 87 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 77 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0048], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 085e], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 110 to 10.152.0.100 port 32819 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x860004ab308204a73082038f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf0b06b8ae081f13414e4025002a7e0a Finished request 10. Going to the next request Waking up in 3.3 seconds. rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=111, length=198 User-Name = "host/TEST-11501.hpsd48.ab.ca" NAS-IP-Address = 10.152.0.100 NAS-Port = 1 NAS-Identifier = "10.152.0.100" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00265EE9B2CA" Called-Station-Id = "000B86611894" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020300061900 State = 0xaf0b06b8ae081f13414e4025002a7e0a Aruba-Essid-Name = "HPSD_RAD2" Aruba-Location-Id = "Tech 01" Message-Authenticator = 0xe25c0d2221df89334b616e7691ae672d # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 111 to 10.152.0.100 port 32819 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xd82ada8cda0de980115896e4bd8ec5bab2a6b9111c109dafdb3e07d6ee4a5cebfa21f39e4efeb6a45e8a8cefc278ef3418aa2ccdb710ebe491eda4ed31df9156020958cddc21ce23a5749c9f06eeb098f3894184707af45719ff0d29350defa774ea4dbda2d0c61b7939abb1757a3ee271f1bb8d4b9868bc6289db9516b6a3d7fa5ad8abdbe57b5ce5359c9eb6a6169647d1310a53e40e930203010001a381fb3081f8301d0603551d0e0416041493331cbb1ef41d0e3c45f31449266f0c304c9b193081c80603551d230481c03081bd801493331cbb1ef41d0e3c45f31449266f0c304c9b19a18199a48196308193310b300906035504061302465231 EAP-Message = 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 EAP-Message = 0x53c8cb22d3f8f1f7 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf0b06b8ad0f1f13414e4025002a7e0a Finished request 11. Going to the next request Waking up in 3.3 seconds. rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=112, length=198 User-Name = "host/TEST-11501.hpsd48.ab.ca" NAS-IP-Address = 10.152.0.100 NAS-Port = 1 NAS-Identifier = "10.152.0.100" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00265EE9B2CA" Called-Station-Id = "000B86611894" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020400061900 State = 0xaf0b06b8ad0f1f13414e4025002a7e0a Aruba-Essid-Name = "HPSD_RAD2" Aruba-Location-Id = "Tech 01" Message-Authenticator = 0xf3d64b1ad71afcaa8f52b1e07dec75ef # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 112 to 10.152.0.100 port 32819 EAP-Message = 0x010500bc19004c396c46b788613f2eae5433381f96d583a69217e9b3504b2751ba9b7c98b5795763ec2dca296f1c69e6a6c0814c9723f903ff293ab3d5bd932b98d0e833e3a01ded48b321eb509dd2e61548875967dc1282a4022b615f7360c573c4d1e52b10f16387a6d3ab90066bb454697e5715108aa946fe9208e0c56acbc5ba8277b15393f6d3ce03a2fb07536a1177550c4dbb473cf421ba6fd64330b3ef931207d7af48184e874f2e55130a498d722c16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf0b06b8ac0e1f13414e4025002a7e0a Finished request 12. Going to the next request Waking up in 3.3 seconds. rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=113, length=514 User-Name = "host/TEST-11501.hpsd48.ab.ca" NAS-IP-Address = 10.152.0.100 NAS-Port = 1 NAS-Identifier = "10.152.0.100" NAS-Port-Type = Wireless-802.11 Calling-Station-Id = "00265EE9B2CA" Called-Station-Id = "000B86611894" Service-Type = Login-User Framed-MTU = 1100 EAP-Message = 0x020501401980000001361603010106100001020100b0943f5f64fa2282445f363ac440b64c37fb18cf4763326ec0e402a023da264ce7cc7a130998beadf6b1f6bc3a512207a7342f7ebd20467c050ff31fc12e9ea8a0de0e4458981c22e12280e9ebbf12578698db93fb15b01d445d5c0efa99f691827dede72db6391749b3def236fc3d09fcc03f42a8a7de92a4016589a1739642ffe3174280b275afc31e6d65404efea2d76e7b4455fdb049a5050f4f1832126cd9bec305bdc050e172b3ab877d3dfdecf36dcda7fb99b964a2e6692e42af12241078c724b9de44d94f5b7f9e571092cb536e4fb2ee26a199fcb81e2f897b33cb8c24fcf401767a3a EAP-Message = 0xa4355e662e9950b8933b040af55133487ac046b9417defd814030100010116030100202189ed42f5c686a93a7b80563149c8ec9c01a092f8ab4636d1c594e0d1e44f03 State = 0xaf0b06b8ac0e1f13414e4025002a7e0a Aruba-Essid-Name = "HPSD_RAD2" Aruba-Location-Id = "Tech 01" Message-Authenticator = 0x4f0f6002da5fa6dafa6fe46827e2ed2c # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 310 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 113 to 10.152.0.100 port 32819 EAP-Message = 0x01060031190014030100010116030100203c5e6364785ff9c2b98e606384d0ae00a07e305e10c79c4ccbbea4e20f469c2d Message-Authenticator = 0x00000000000000000000000000000000 State = 0xaf0b06b8ab0d1f13414e4025002a7e0a Finished request 13. Going to the next request -- View this message in context: http://freeradius.1045715.n5.nabble.com/Renaming-during-Machine-Authenticati... Sent from the FreeRadius - User mailing list archive at Nabble.com.