On Line 154 I have default Auth-Type = ntlm_auth. If I comment this out I get the Access-reject packet. thanks, SB On 4/27/07, tnt@kalik.co.yu <tnt@kalik.co.yu> wrote:
Well, it matched something in the users file:
users: Matched entry DEFAULT at line 154
Dana 27/4/2007, "shrikant Bhat" <shrikabhat@gmail.com> piše:
Yes I figured that. thanks for that. But the issues is the user I am trying to authenticate is not listed in users file or in AD, so I dont understand how is it authenticating this user. I have attached debug . thanks for the help.
********************************************************************************************************* rad_recv: Access-Request packet from host 127.0.0.1:32779, id=100, length=59 User-Name = "raduser" User-Password = "radpass" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "raduser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 3 users: Matched entry DEFAULT at line 154 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns ok) for request 3 rad_check_password: Found Auth-Type ntlm_auth auth: type "ntlm_auth" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 radius_xlat: Running registered xlat function of module mschap for string 'User-Name' radius_xlat: '--username=raduser' radius_xlat: '--password=radpass' modcall[authenticate]: module "ntlm_auth" returns ok for request 3 modcall: leaving group authenticate (returns ok) for request 3 Sending Access-Accept of id 100 to 127.0.0.1 port 32779 Finished request 3 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 3 ID 100 with timestamp 4631d1f0 Nothing to do. Sleeping until we see a request. ****************************************************************************************************
On 4/27/07, tnt@kalik.co.yu <tnt@kalik.co.yu> wrote:
Error seems to be because shared secret is testing123 not testing 123. But you need to paste output od radiusd-X after Access-Request. Open two ssh sessions and do radtest from one and radiusd -X from the other.
Ivan Kalik Kalik Informatika ISP
Dana 27/4/2007, "shrikant Bhat" <shrikabhat@gmail.com> pi e:
I get this error [root@rad ~]# radtest raduser radpass localhost 0 testing 123 Sending Access-Request of id 47 to 127.0.0.1 port 1812 User-Name = "raduser" User-Password = "radpass" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Framed-Protocol = PPP rad_recv: Access-Accept packet from host 127.0.0.1:1812, id=47, length=20 rad_verify: Received Access-Accept packet from client 127.0.0.1 port 1812 with invalid signature (err=2)! (Shared secret is incorrect.)
On 4/27/07, tnt@kalik.co.yu <tnt@kalik.co.yu> wrote:
And what happens when you get Access-Request?
Dana 27/4/2007, "shrikant Bhat" <shrikabhat@gmail.com> pi e:
Hello Alan, I have built and installed 1.1.6 version of FreeRadius. When I test using radtest it authenticates any user with any pasword, what I mean by this is it doesnt seem to contact the ADS to lookup the user information and authenticate. I have attached the debug ***************************************************************************************************** [root@my-rad raddb]# /usr/local/sbin/radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded exec exec: wait = no exec: program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYDOMAIN.COM --username=%{mschap:User-Name} --password=%{User-Password}" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" Module: Instantiated exec (ntlm_auth) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = yes mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "cistron" [/etc/raddb/users]:1 Cistron compatibility checks for entry raduser ... [/etc/raddb/users]:153 Cistron compatibility checks for entry DEFAULT .. ?Changing 'Auth-Type =' to 'Auth-Type +=' [/etc/raddb/users]:172 Cistron compatibility checks for entry DEFAULT .. [/etc/raddb/users]:184 Cistron compatibility checks for entry DEFAULT .. [/etc/raddb/users]:191 Cistron compatibility checks for entry DEFAULT .. [/etc/raddb/users]:198 Cistron compatibility checks for entry DEFAULT .. Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. *********************************************************************** Thanks SB
On 4/23/07, Alan DeKok <aland@deployingradius.com> wrote: > shrikant Bhat wrote: > > 1.The document says adding exec ... to the modules section and then > > listing ntlm_auth in the authenticate section. when I have exec > > ntlm_auth in modules section and ntlm_auth listed in authenticate > > section I get 'Unknown Auth-Type "exec" in authenticate section' > > error > > how do I fix this? please help. > > I have attached my radiusd.conf file. > > All I know is that it works for me in 1.1.6. > > > 2. To authenticate cisco telnet sessions, is it possible to use > > freeRadius with AD integration > > what I mean by this is can I telnet using my ad ID and password with > > freeRadius being authentication server? > > Yes. > > Alan DeKok. > -- > http://deployingradius.com - The web site of the book > http://deployingradius.com/blog/ - The blog > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/usershtml
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/usershtml
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html