THaNks A Lot Alan, Now Server is working Fine for the IPv4 Client Request only, But i dont understand with the same Image(with the same set-up) why the IPv6(client) Connection is not receiving reply back from the Radius Server...though Server is authentication properly as similar its doing for the IPv4 connection from the client. Server side: I am not sure whether Radius Server is sending(access-accept is showing on screen) the packet to IPv6 Client or not..I need to confrim that !!! Client Side: After sending the Access-Request packet to server the client is getting time out and after 3 tries and then its exceeding its time limit and stop requesting for the IPv6 connection further. I have stoped time out even aslo...but not worked ! Its not getting response packet from the Radius Server. Thanks again.... Vikas Alan DeKok <aland@deployingradius.com> wrote: Vikas Bagora wrote:
1. I am using freeradius-server-2.0.0-pre1
Please use 2.0.0-pre2.
- "*users*" file is modified in only with this lines : vikas User-Password == password
Change that line to: vikas Cleartext-Password := "password" Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html --------------------------------- Luggage? GPS? Comic books? Check out fitting gifts for grads at Yahoo! Search.