Greetings, I'm trying to look at the Class attribute during proxying. I want to take data stored in the Class attribute and rewrite other attribute(s) based on the contents. I have it working right now but have two questions regarding it. 1) I'm currently using rlm_exec to call a simple perl script that "decodes" the Class attribute value (from accessing %{Class}) from it's hex octet form back to the ASCII inside. I just wanted to make sure that I wasn't missing something, and that there isn't an easier way to get at the ASCII inside the octet stream. 2) The rfc's allow for more than one Class attribute (at least in Accounting-Request packets). How does FreeRADIUS treat references to %{Class} when this happens? i.e. Is there a syntax to refer to each instance of the Class attr or get a count of how many are in the packet? (I'm not currently running into this, but want to keep that base covered in case that situation arises). Thanks, -Shawn ~~~~~~~~~~~~~~~~~~~~~~~~~ Shawn O'Shea Network Engineer Airpath Wireless, Inc. "Clearing the Way" 781-250-3500-office 781-250-3535-direct 781-250-3503-fax shawno@airpath.com http://www.airpath.com ~~~~~~~~~~~~~~~~~~~~~~~~~ CONFIDENTIALITY STATEMENT This electronic message contains information from Airpath Wireless, Inc., and may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this message is prohibited. If you have received this electronic message in error, please notify the sender immediately by reply e-mail shawno@airpath.com or telephone at (781) 250-3500.