RE: User authentication using Mysql table - radacct

19 Dec 2006

      Hi All,
Here is the radiusd -X log. The user authentication from the radius.radcheck 
table is working in the debug mode but it is not authenticating from the 
radius.radcheck table in the regular run mode.
Starting - reading configuration files ...

reread_config:  reading radiusd.conf
Config:   including file: /etc/raddb/proxy.conf
Config:   including file: /etc/raddb/clients.conf
Config:   including file: /etc/raddb/snmp.conf
Config:   including file: /etc/raddb/eap.conf
Config:   including file: /etc/raddb/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = yes
main: log_auth_badpass = yes
main: log_auth_goodpass = yes
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "radiusd"
main: group = "radiusd"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded detail
detail: detailfile = 
"/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (auth_log)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/raddb/users"
files: acctusersfile = "/etc/raddb/acct_users"
files: preproxy_usersfile = "/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = ""
sql: login = "root"
sql: password = "bzpwdl"
sql: radius_db = "radius"
sql: acct_table = "radacct"
sql: acct_table2 = "radacct"
sql: authcheck_table = "radcheck"
sql: authreply_table = "radreply"
sql: groupcheck_table = "radgroupcheck"
sql: groupreply_table = "radgroupreply"
sql: usergroup_table = "usergroup"
sql: nas_table = "nas"
sql: dict_table = "dictionary"
sql: sqltrace = no
sql: sqltracefile = "/var/log/radius/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op      
      FROM radcheck           WHERE Username = '%{SQL-User-Name}'           
ORDER BY id"
sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op      
      FROM radreply           WHERE Username = '%{SQL-User-Name}'           
ORDER BY id"
sql: authorize_group_check_query = "SELECT 
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op 
  FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' 
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT 
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op 
  FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' 
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', 
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), 
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = 
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND 
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = "UPDATE radacct           SET FramedIPAddress 
= '%{Framed-IP-Address}',           AcctSessionTime = 
'%{Acct-Session-Time}',           AcctInputOctets = '%{Acct-Input-Octets}',  
          AcctOutputOctets = '%{Acct-Output-Octets}'           WHERE 
AcctSessionId = '%{Acct-Session-Id}'           AND UserName = 
'%{SQL-User-Name}'           AND NASIPAddress= '%{NAS-IP-Address}'"
sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, 
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, 
AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, 
AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, 
ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) 
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', 
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', 
'%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + 
%{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', 
'', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', 
'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', 
'%{Framed-IP-Address}', '0')"
sql: accounting_start_query = "INSERT into radacct (AcctSessionId, 
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, 
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, 
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, 
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, 
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) 
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', 
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', 
'%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', 
'', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', 
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', 
'%{Acct-Delay-Time}', '0')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', 
AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' 
WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' 
AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', 
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = 
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', 
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = 
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE 
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND 
NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, 
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, 
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, 
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, 
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, 
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) 
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', 
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', 
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + 
%{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', 
'%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', 
'%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', 
'%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', 
'%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE 
UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = ""
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, 
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol 
FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
sql: postauth_table = "radpostauth"
sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) 
values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', 
'%{reply:Packet-Type}', NOW())"
sql: safe-characters = 
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to root@localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, 
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
detail: detailfile = 
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Accounting-Request packet from host 127.0.0.1:32773, id=9, 
length=178
        Acct-Status-Type = Stop
        User-Name = "betty"
        Calling-Station-Id = "00-14-A4-38-60-D3"
        Called-Station-Id = "00-10-18-0C-35-50"
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 2
        NAS-Port-Id = "00000002"
        NAS-IP-Address = 0.0.0.0
        NAS-Identifier = "nas01"
        Framed-IP-Address = 192.168.182.6
        Acct-Session-Id = "45883e4800000002"
        Acct-Input-Octets = 79624
        Acct-Output-Octets = 408508
        Acct-Input-Gigawords = 0
        Acct-Output-Gigawords = 0
        Acct-Input-Packets = 597
        Acct-Output-Packets = 534
        Acct-Session-Time = 3437
        Acct-Terminate-Cause = User-Request
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 0
  modcall[preacct]: module "preprocess" returns noop for request 0
rlm_acct_unique: Hashing 'NAS-Port = 2,Client-IP-Address = 
127.0.0.1,NAS-IP-Address = 0.0.0.0,Acct-Session-Id = 
"45883e4800000002",User-Name = "betty"'
rlm_acct_unique: Acct-Unique-Session-ID = "7275a42739a8984c".
  modcall[preacct]: module "acct_unique" returns ok for request 0
    rlm_realm: No '@' in User-Name = "betty", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[preacct]: module "suffix" returns noop for request 0
  modcall[preacct]: module "files" returns noop for request 0
modcall: group preacct returns ok for request 0
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 0
radius_xlat:  '/var/log/radius/radacct/127.0.0.1/detail-20061219'
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d 
expands to /var/log/radius/radacct/127.0.0.1/detail-20061219
  modcall[accounting]: module "detail" returns ok for request 0
  modcall[accounting]: module "unix" returns ok for request 0
radius_xlat:  '/var/log/radius/radutmp'
radius_xlat:  'betty'
  modcall[accounting]: module "radutmp" returns ok for request 0
radius_xlat:  'betty'
rlm_sql (sql): sql_set_user escaped user --> 'betty'
radius_xlat:  'UPDATE radacct SET AcctStopTime = '2006-12-19 15:30:01', 
AcctSessionTime = '3437', AcctInputOctets = '79624', AcctOutputOctets = 
'408508', AcctTerminateCause = 'User-Request', AcctStopDelay = '', 
ConnectInfo_stop = '' WHERE AcctSessionId = '45883e4800000002' AND UserName 
= 'betty' AND NASIPAddress = '0.0.0.0''
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Released sql socket id: 4
  modcall[accounting]: module "sql" returns ok for request 0
modcall: group accounting returns ok for request 0
Sending Accounting-Response of id 9 to 127.0.0.1:32773
Finished request 0
Going to the next request
--- Walking the entire request list ---
Cleaning up request 0 ID 9 with timestamp 45884bc9
Nothing to do.  Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:32796, id=0, length=215
        User-Name = "naeem"
        CHAP-Challenge = 0x78d19cf06eec5590eb285db491f0dd6e
        CHAP-Password = 0x0090ab65cd9d52cdb6d699e10d7cf9b116
        NAS-IP-Address = 0.0.0.0
        Service-Type = Login-User
        Framed-IP-Address = 192.168.182.6
        Calling-Station-Id = "00-14-A4-38-60-D3"
        Called-Station-Id = "00-10-18-0C-35-50"
        NAS-Identifier = "nas01"
        Acct-Session-Id = "45884bc900000002"
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 2
        Message-Authenticator = 0xee0c9933e102f3b2365e323e447124e4
        WISPr-Logoff-URL = "http://192.168.182.1:3990/logoff"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "preprocess" returns ok for request 1
radius_xlat:  '/var/log/radius/radacct/127.0.0.1/auth-detail-20061219'
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d 
expands to /var/log/radius/radacct/127.0.0.1/auth-detail-20061219
  modcall[authorize]: module "auth_log" returns ok for request 1
  rlm_chap: Setting 'Auth-Type := CHAP'
  modcall[authorize]: module "chap" returns ok for request 1
  modcall[authorize]: module "mschap" returns noop for request 1
    rlm_realm: No '@' in User-Name = "naeem", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 1
  rlm_eap: No EAP-Message, not doing EAP
  modcall[authorize]: module "eap" returns noop for request 1
    users: Matched entry DEFAULT at line 156
  modcall[authorize]: module "files" returns ok for request 1
radius_xlat:  'naeem'
rlm_sql (sql): sql_set_user escaped user --> 'naeem'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM 
radcheck           WHERE Username = 'naeem'  ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 3
radius_xlat:  'SELECT 
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op 
FROM radgroupcheck,usergroup WHERE usergroup.Username = 'naeem' AND 
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id, UserName, Attribute, Value, op           FROM 
radreply           WHERE Username = 'naeem'  ORDER BY id'
radius_xlat:  'SELECT 
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op 
FROM radgroupreply,usergroup WHERE usergroup.Username = 'naeem' AND 
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 3
  modcall[authorize]: module "sql" returns ok for request 1
modcall: group authorize returns ok for request 1
  rad_check_password:  Found Auth-Type CHAP
auth: type "CHAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 1
  rlm_chap: login attempt by "naeem" with CHAP password
  rlm_chap: Using clear text password naeem123 for user naeem 
authentication.
  rlm_chap: chap user naeem authenticated succesfully
  modcall[authenticate]: module "chap" returns ok for request 1
modcall: group Auth-Type returns ok for request 1
Login OK: [naeem/<CHAP-Password>] (from client localhost port 2 cli 
00-14-A4-38-60-D3)
  Processing the post-auth section of radiusd.conf
modcall: entering group post-auth for request 1
rlm_sql (sql): Processing sql_postauth
radius_xlat:  'naeem'
rlm_sql (sql): sql_set_user escaped user --> 'naeem'
radius_xlat:  'INSERT into radpostauth (id, user, pass, reply, date) values 
('', 'naeem', 'Chap-Password', 'Access-Accept', NOW())'
rlm_sql (sql) in sql_postauth: query is INSERT into radpostauth (id, user, 
pass, reply, date) values ('', 'naeem', 'Chap-Password', 'Access-Accept', 
NOW())
rlm_sql (sql): Reserving sql socket id: 2
rlm_sql (sql): Released sql socket id: 2
  modcall[post-auth]: module "sql" returns ok for request 1
modcall: group post-auth returns ok for request 1
Sending Access-Accept of id 0 to 127.0.0.1:32796
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 127.0.0.1:32773, id=10, 
length=130
        Acct-Status-Type = Start
        User-Name = "naeem"
        Calling-Station-Id = "00-14-A4-38-60-D3"
        Called-Station-Id = "00-10-18-0C-35-50"
        NAS-Port-Type = Wireless-802.11
        NAS-Port = 2
        NAS-Port-Id = "00000002"
        NAS-IP-Address = 0.0.0.0
        NAS-Identifier = "nas01"
        Framed-IP-Address = 192.168.182.6
        Acct-Session-Id = "45884bc900000002"
  Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 2
  modcall[preacct]: module "preprocess" returns noop for request 2
rlm_acct_unique: Hashing 'NAS-Port = 2,Client-IP-Address = 
127.0.0.1,NAS-IP-Address = 0.0.0.0,Acct-Session-Id = 
"45884bc900000002",User-Name = "naeem"'
rlm_acct_unique: Acct-Unique-Session-ID = "8ea85a78544d0edd".
  modcall[preacct]: module "acct_unique" returns ok for request 2
    rlm_realm: No '@' in User-Name = "naeem", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[preacct]: module "suffix" returns noop for request 2
  modcall[preacct]: module "files" returns noop for request 2
modcall: group preacct returns ok for request 2
  Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 2
radius_xlat:  '/var/log/radius/radacct/127.0.0.1/detail-20061219'
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d 
expands to /var/log/radius/radacct/127.0.0.1/detail-20061219
  modcall[accounting]: module "detail" returns ok for request 2
  modcall[accounting]: module "unix" returns ok for request 2
radius_xlat:  '/var/log/radius/radutmp'
radius_xlat:  'naeem'
  modcall[accounting]: module "radutmp" returns ok for request 2
radius_xlat:  'naeem'
rlm_sql (sql): sql_set_user escaped user --> 'naeem'
radius_xlat:  'INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, 
Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, 
AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, 
AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, 
AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, 
AcctStartDelay, AcctStopDelay) values('45884bc900000002', 
'8ea85a78544d0edd', 'naeem', '', '0.0.0.0', '2', 'Wireless-802.11', 
'2006-12-19 15:30:15', '0', '0', '', '', '', '0', '0', '00-10-18-0C-35-50', 
'00-14-A4-38-60-D3', '', '', '', '192.168.182.6', '', '0')'
rlm_sql (sql): Reserving sql socket id: 1
rlm_sql (sql): Released sql socket id: 1
  modcall[accounting]: module "sql" returns ok for request 2
modcall: group accounting returns ok for request 2
Sending Accounting-Response of id 10 to 127.0.0.1:32773
Finished request 2
Going to the next request
Cleaning up request 2 ID 10 with timestamp 45884bd7
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 0 with timestamp 45884bd7
Nothing to do.  Sleeping until we see a request.

----Original Message Follows----
From: "Cory Robson" <cory@cmi.net.au>
Reply-To: FreeRadius users mailing list 
<freeradius-users@lists.freeradius.org>
To: "'FreeRadius users mailing list'" 
<freeradius-users@lists.freeradius.org>
Subject: RE: User authentication using Mysql table - radacct
Date: Wed, 20 Dec 2006 02:01:55 +0900

Run the radius in debug mode Radius -X and see if creates sql coonections,
if not the the sql include line is still commented out.

Refer back to the link i previously included and again make sure the
sql.conf and radius.conf are edited correctly.

$INCLUDE  ${confdir}/sql.conf  needs to be uncommented

-----Original Message-----
From: freeradius-users-bounces+cory=cmi.net.au@lists.freeradius.org
[mailto:freeradius-users-bounces+cory=cmi.net.au@lists.freeradius.org] On
Behalf Of N S
Sent: Wednesday, 20 December 2006 1:29 AM
To: freeradius-users@lists.freeradius.org
Subject: RE: User authentication using Mysql table - radacct

I have the radacct table populated with a few users. But the radius is not
checking this table for user info. The only users being
allowed/authenticated are those that are in the users.conf file.How do I
make the radius look for the user info in the mysql database.
The freeradius version is 1.0.5. I have uncommented the sql in authorize,
accounting and post-auth  sections.
Thanks.
Naeem

_________________________________________________________________

_________________________________________________________________
Get free, personalized online radio with MSN Radio powered by Pandora
http://radio.msn.com/?icid=T002MSN03A07001

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html

__________ NOD32 1928 (20061219) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com

-
List info/subscribe/unsubscribe? See 
http://www.freeradius.org/list/users.html

_________________________________________________________________
Visit MSN Holiday Challenge for your chance to win up to $50,000 in Holiday 
cash from MSN today! 
http://www.msnholidaychallenge.com/index.aspx?ocid=tagline&locale=en-us