Hello All, I am setting up an Eduroam authentication server using FreeRadius 2.1.1 on Suse Linux 12. I am proxying authentication requests to a Cisco ACS. When testing using radtest from the FreeRadius box authentication is proxyed to ACS fine and i get an access-accept back. However when i try from a wireless client the proxy response from the ACS is an Access-Reject. In the failed attempts logs on the ACS it says bad username or password. i'm pretty sure im using the correct password. Is there any reason why this should not work? I've posted my logs below:- rad_recv: Access-Request packet from host 1.1.1.1 port 32768, id=210, length=255 User-Name = "username ( mailto:01420893@uct.ac.za )@xyz.ac.za" Calling-Station-Id = "00-1e-64-8f-f1-2a" Called-Station-Id = "08-17-35-32-f2-90:Eduroam" NAS-Port = 29 NAS-IP-Address = 1.1.1.1 NAS-Identifier = "uc-wism-2" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "63" EAP-Message = 0x02a0002b190017030100204673d48ae9e9d21afa7fe1fd6cae4d95841ae136e4fe85ad44acd3a4d0228a69 State = 0x4541503d302e66666666666666662e63666337302e373b5356433d302e31363139623b Message-Authenticator = 0xaab2e06ffb5753411ad8d42b71cafbdd +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] Looking up realm "xyz.ac.za" for User-Name = "username@xyz.ac.za" [suffix] Found realm "xyz.ac.za" [suffix] Adding Stripped-User-Name = "username" [suffix] Adding Realm = "xyz.ac.za" [suffix] Proxying request from user username to realm xyz.ac.za [suffix] Preparing to proxy authentication request to realm "xyz.ac.za" ++[suffix] returns updated [eap] Request is supposed to be proxied to Realm xyz.ac.za. Not doing EAP. ++[eap] returns noop ++[unix] returns notfound ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Sending Access-Request of id 81 to 2.2.2.2 port 1812 User-Name = "username" Calling-Station-Id = "00-1e-64-8f-f1-2a" Called-Station-Id = "08-17-35-32-f2-90:Eduroam" NAS-Port = 29 NAS-IP-Address = 1.1.1.1 NAS-Identifier = "uc-wism-2" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "63" EAP-Message = 0x02a0002b190017030100204673d48ae9e9d21afa7fe1fd6cae4d95841ae136e4fe85ad44acd3a4d0228a69 State = 0x4541503d302e66666666666666662e63666337302e373b5356433d302e31363139623b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x323130 Proxying request 8 to home server 2.2.2.2 port 1812 Sending Access-Request of id 81 to 2.2.2.2 port 1812 User-Name = "username" Calling-Station-Id = "00-1e-64-8f-f1-2a" Called-Station-Id = "08-17-35-32-f2-90:Eduroam" NAS-Port = 29 NAS-IP-Address = 1.1.1.1 NAS-Identifier = "uc-wism-2" Airespace-Wlan-Id = 4 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "63" EAP-Message = 0x02a0002b190017030100204673d48ae9e9d21afa7fe1fd6cae4d95841ae136e4fe85ad44acd3a4d0228a69 State = 0x4541503d302e66666666666666662e63666337302e373b5356433d302e31363139623b Message-Authenticator = 0x00000000000000000000000000000000 Proxy-State = 0x323130 Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Reject packet from host 2.2.2.2 port 1812, id=81, length=61 Proxy-State = 0x323130 EAP-Message = 0x04a00004 Reply-Message = "Rejected\n\r" Message-Authenticator = 0xbcede120e168d2d92558e5f4ab8e03d5 Thanks Erisan ### UNIVERSITY OF CAPE TOWN This e-mail is subject to the UCT ICT policies and e-mail disclaimer published on our website at http://www.uct.ac.za/about/policies/emaildisclaimer/ or obtainable from +27 21 650 9111. This e-mail is intended only for the person(s) to whom it is addressed. If the e-mail has reached you in error, please notify the author. If you are not the intended recipient of the e-mail you may not use, disclose, copy, redirect or print the content. If this e-mail is not related to the business of UCT it is sent by the sender in the sender's individual capacity. ###