Hi All, I'm pulling my hair out on this on. I have setup freeradius as a package on pfsense (freeBSD) and when attempting to authenticate using the pppoe server built into free radius i get the below output: I have checked and double checked the shared secret and even set it to a single figure for the below test. What am I doing wrong??? Thanks in advance!! Tim rad_recv: Access-Request packet from host 192.168.1.254 port 23599, id=140, length=105 NAS-Identifier = "raph-firewall.local" NAS-Port = 1 NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "0023df8bf13c" Called-Station-Id = "*" User-Name = "tim" User-Password = "\376\211\001\214\030rOIT\246\225\327\333\3256\321" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "tim", skipping NULL due to config. ++[suffix] returns noop [ntdomain] No '\' in User-Name = "tim", skipping NULL due to config. ++[ntdomain] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry tim at line 2 ++[files] returns ok rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[daily] returns noop rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[weekly] returns noop rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[monthly] returns noop rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[forever] returns noop rlm_checkval: Item Name: Calling-Station-Id, Value: 0023df8bf13c rlm_checkval: Could not find attribute named Calling-Station-Id in check pairs ++[checkval] returns notfound ++[expiration] returns noop