Hello list, Iam using freeradius Versión: 2.1.12, and I have read some tutorial about freeradius + samba4 as active directory. when a user try to autenticate I have the follow logs....somebody can helpme. Ready to process requests. rad_recv: Access-Request packet from host 10.0.100.2 port 1060, id=0, length=181 Message-Authenticator = 0x87734694ee77d9806817c3a72bd970dd Service-Type = Framed-User User-Name = "yordan" Framed-MTU = 1488 Called-Station-Id = "00-23-CD-C3-BD-4E:TP-LINK_C3BD4E" Calling-Station-Id = "4C-BB-58-35-80-0E" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200000b01796f7264616e NAS-IP-Address = 192.168.1.5 NAS-Port = 2 NAS-Port-Id = "STA port # 2" # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} [ldap] performing user authorization for yordan [ldap] expand: (&(sAMAccountName=%{User-Name})) -> (&(sAMAccountName=yordan)) [ldap] expand: OU=Comercializadora,OU=CUPET,DC=eccmg,DC=cupet,DC=cu -> OU=Comercializadora,OU=CUPET,DC=eccmg,DC=cupet,DC=cu [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to 172.18.68.8:389, authentication 0 [ldap] bind as cn=openfire,OU=Administrador de Red,OU=Comercializadora,OU=CUPET,DC=eccmg,DC=cupet,DC=cu/open&^2017 to 172.18.68.8:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in OU=Comercializadora,OU=CUPET,DC=eccmg,DC=cupet,DC=cu, with filter (&(sAMAccountName=yordan)) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user yordan authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Login incorrect: [yordan/<no User-Password attribute>] (from client 10.0.100.0/24 port 2 cli 4C-BB-58-35-80-0E) Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 0 to 10.0.100.2 port 1060 Waking up in 4.9 seconds. Cleaning up request 0 ID 0 with timestamp +54 Ready to process requests.