I have read the debug output it says "auth: Failed to validate the user". But when I have tried same user/pass combination with radclient it works fine
I know it's a lot of information, but reading it is the ONLY way you will solve the problem.
I have read all the information care fully and I have also added alot of debug messages in radiusd.
auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. WARNING: Unprintable characters in the password. ? Double-check the shared secret on the server and the NAS!
I was thinking this was a secret issue. But I have cross checked it on my client and server side both. Here is packet output from radclient application (Works) rad_recv: Access-Request packet from host 127.0.0.1:32844, id=223, length=49 User-Name = "bob" User-Password = "bob" Framed-Protocol = PPP Processing the authorize section of radiusd.conf and here is my radexample packet output (Do not works) rad_recv: Access-Request packet from host 127.0.0.1:32855, id=223, length=55 User-Name = "bob" User-Password = "\265\\VJ\250\\p\3515\216\230\3343\263HW" Service-Type = Authenticate-Only NAS-IP-Address = 127.0.0.1 Processing the authorize section of radiusd.conf
Perhaps following those instructions would be useful.
Yup
Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
____________________________________________________________________________________ Don't get soaked. Take a quick peek at the forecast with the Yahoo! Search weather shortcut. http://tools.search.yahoo.com/shortcuts/#loc_weather