These are all different requests. To get any sort of sense you need to look at the debug output for the one request you are dealing with.
Follow the instructions on
http://wiki.freeradius.org/list-help
Do one authentication. Send _all_ the debug output here, not just bits of it.
Thanks for the pointer. There were too many lines in the debug output. So, I tried to trim it yesterday. Since I am not sure which one to remove, I am pasting the entire debugfile. (this is only for the testuser02's request). Sorry, it's too long. FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/sql including configuration file /etc/raddb/mods-config/sql/main/postgresql/queries.conf including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_sql # Loading module "sql" from file /etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_postgresql" server = "" port = 0 login = "" password = <<< secret >>> radius_db = "dbname=gradius host=localhost user=gradius password=password" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" logfile = "/var/log/radius/sqllog.sql" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, userName, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT group_name FROM radusergroup WHERE username='%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username='%{SQL-User-Name}' AND acct_stop_time IS NULL" simul_verify_query = "SELECT rad_acct_id, acct_session_id, username, nas_ip_address, nas_port_id, framed_ip_address, calling_station_id, framed_protocol FROM radacct WHERE username='%{SQL-User-Name}' AND acct_stop_time IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" query_timeout = 5 accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-none}.query}" type { accounting-on { query = "UPDATE radacct SET acct_stop_time = TO_TIMESTAMP(%{integer:Event-Timestamp}), acct_update_time = TO_TIMESTAMP(%{integer:Event-Timestamp}), acct_session_time = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(acct_start_time))), acct_terminate_cause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acct_stop_time IS NULL AND nas_ip_address= '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' AND acct_start_time <= '%S'::timestamp" } accounting-off { query = "UPDATE radacct SET acct_stop_time = TO_TIMESTAMP(%{integer:Event-Timestamp}), acct_update_time = TO_TIMESTAMP(%{integer:Event-Timestamp}), acct_session_time = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(acct_start_time))), acct_terminate_cause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acct_stop_time IS NULL AND nas_ip_address= '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}' AND acct_start_time <= '%S'::timestamp" } start { query = "INSERT INTO radacct (acct_session_id, acct_unique_id, username, realm, nas_ip_address, nas_port_id, nas_port_type, acct_start_time, acct_update_time, acct_stop_time, acct_session_time, acct_authentic, connect_info_start, connect_info_stop, acct_input_octets, acct_output_octets, called_station_id, calling_station_id, acct_terminate_cause, service_type, framed_protocol, framed_ip_address) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', NULLIF('%{Realm}', ''), '%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}}', NULLIF('%{%{NAS-Port-ID}:-%{NAS-Port}}', ''), '%{NAS-Port-Type}', TO_TIMESTAMP(%{integer:Event-Timestamp}), TO_TIMESTAMP(%{integer:Event-Timestamp}), NULL, 0, '%{Acct-Authentic}', '%{Connect-Info}', NULL, 0, 0, '%{Called-Station-Id}', '%{Calling-Station-Id}', NULL, '%{Service-Type}', '%{Framed-Protocol}', NULLIF('%{Framed-IP-Address}', '')::inet)" } interim-update { query = "UPDATE radacct SET framed_ip_address = NULLIF('%{Framed-IP-Address}', '')::inet, acct_session_time = %{%{Acct-Session-Time}:-NULL}, acct_interval = (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM (COALESCE(acct_update_time, acct_start_time)))), acct_update_time = TO_TIMESTAMP(%{integer:Event-Timestamp}), acct_input_octets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), acct_output_octets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint) WHERE acct_unique_id = '%{Acct-Unique-Session-Id}' AND acct_stop_time IS NULL" } stop { query = "UPDATE radacct SET acct_stop_time = TO_TIMESTAMP(%{integer:Event-Timestamp}), acct_update_time = TO_TIMESTAMP(%{integer:Event-Timestamp}), acct_session_time = COALESCE(%{%{Acct-Session-Time}:-NULL}, (%{integer:Event-Timestamp} - EXTRACT(EPOCH FROM(acct_start_time)))), acct_input_octets = (('%{%{Acct-Input-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Input-Octets}:-0}'::bigint), acct_output_octets = (('%{%{Acct-Output-Gigawords}:-0}'::bigint << 32) + '%{%{Acct-Output-Octets}:-0}'::bigint), acct_terminate_cause = '%{Acct-Terminate-Cause}', framed_ip_address = NULLIF('%{Framed-IP-Address}', '')::inet, connect_info_stop = '%{Connect-Info}' WHERE acct_unique_id = '%{Acct-Unique-Session-Id}' AND acct_stop_time IS NULL" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', NOW())" } } rlm_sql (sql): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked Creating attribute SQL-Group instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql postgresql { send_application_name = yes } rlm_sql (sql): Attempting to connect to database "dbname=gradius host=localhost user=gradius password=password" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=gradius host=localhost user=gradius password=password application_name='FreeRADIUS 3.0.13 - radiusd (sql)' Connected to database 'gradius' on 'localhost' server version 90224, protocol version 3, backend PID 19543 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=gradius host=localhost user=gradius password=password application_name='FreeRADIUS 3.0.13 - radiusd (sql)' Connected to database 'gradius' on 'localhost' server version 90224, protocol version 3, backend PID 19544 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=gradius host=localhost user=gradius password=password application_name='FreeRADIUS 3.0.13 - radiusd (sql)' Connected to database 'gradius' on 'localhost' server version 90224, protocol version 3, backend PID 19545 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=gradius host=localhost user=gradius password=password application_name='FreeRADIUS 3.0.13 - radiusd (sql)' Connected to database 'gradius' on 'localhost' server version 90224, protocol version 3, backend PID 19546 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=gradius host=localhost user=gradius password=password application_name='FreeRADIUS 3.0.13 - radiusd (sql)' Connected to database 'gradius' on 'localhost' server version 90224, protocol version 3, backend PID 19547 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 6 rlm_sql (sql): Adding client 192.168.3.5 (Aruba) to global clients list rlm_sql (192.168.3.5): Client "Aruba" (sql) added rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=gradius host=localhost user=gradius password=password application_name='FreeRADIUS 3.0.13 - radiusd (sql)' Connected to database 'gradius' on 'localhost' server version 90224, protocol version 3, backend PID 19548 } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 36035 Listening on proxy address :: port 34818 Ready to process requests (0) Received Access-Request Id 8 from 192.168.3.5:56875 to 192.168.3.33:1812 length 207 (0) User-Name = "testuser02" (0) NAS-IP-Address = 192.168.3.5 (0) NAS-Port = 0 (0) NAS-Identifier = "192.168.3.10" (0) NAS-Port-Type = Wireless-802.11 (0) Calling-Station-Id = "70bbe9363cbc" (0) Called-Station-Id = "aca31ec330ac" (0) Service-Type = Login-User (0) Framed-MTU = 1100 (0) EAP-Message = 0x0201000f0174657374757365723032 (0) Aruba-Essid-Name = "radius" (0) Aruba-Location-Id = "Turmeric-01" (0) Aruba-AP-Group = "Turmeric Cloud" (0) Aruba-Device-Type = "Linux" (0) Message-Authenticator = 0xdf3e15824aa0bb3dc1b3e5ad618e85bb (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 15 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 2 length 22 (0) eap: EAP session adding &reply:State = 0x627c163d627e126e (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 8 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (0) EAP-Message = 0x010200160410ae7e1bfc8efbd85c0e3492879aa99209 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x627c163d627e126e07b4848fe40bd4b0 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 9 from 192.168.3.5:56875 to 192.168.3.33:1812 length 218 (1) User-Name = "testuser02" (1) NAS-IP-Address = 192.168.3.5 (1) NAS-Port = 0 (1) NAS-Identifier = "192.168.3.10" (1) NAS-Port-Type = Wireless-802.11 (1) Calling-Station-Id = "70bbe9363cbc" (1) Called-Station-Id = "aca31ec330ac" (1) Service-Type = Login-User (1) Framed-MTU = 1100 (1) EAP-Message = 0x0202000803191534 (1) State = 0x627c163d627e126e07b4848fe40bd4b0 (1) Aruba-Essid-Name = "radius" (1) Aruba-Location-Id = "Turmeric-01" (1) Aruba-AP-Group = "Turmeric Cloud" (1) Aruba-Device-Type = "Linux" (1) Message-Authenticator = 0x4dc92b1500f47f53075630eba4fbab3c (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 8 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) sql: EXPAND %{User-Name} (1) sql: --> testuser02 (1) sql: SQL-User-Name set to 'testuser02' rlm_sql (sql): Reserved connection (1) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser02' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser02' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 2 , fields = 5 (1) sql: User found in radcheck table (1) sql: Conditional check items matched, merging assignment check items (1) sql: Cleartext-Password := "password" (1) sql: EXPAND SELECT id, userName, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, userName, attribute, value, op FROM radreply WHERE username = 'testuser02' ORDER BY id (1) sql: Executing select query: SELECT id, userName, attribute, value, op FROM radreply WHERE username = 'testuser02' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (1) sql: EXPAND SELECT group_name FROM radusergroup WHERE username='%{SQL-User-Name}' ORDER BY priority (1) sql: --> SELECT group_name FROM radusergroup WHERE username='testuser02' ORDER BY priority (1) sql: Executing select query: SELECT group_name FROM radusergroup WHERE username='testuser02' ORDER BY priority rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 (1) sql: User found in the group table (1) sql: EXPAND SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = '%{SQL-Group}' ORDER BY id (1) sql: --> SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = 'testgroup01' ORDER BY id (1) sql: Executing select query: SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = 'testgroup01' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (1) sql: Group "testgroup01": Conditional check items matched (1) sql: Group "testgroup01": Merging assignment check items (1) sql: EXPAND SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = '%{SQL-Group}' ORDER BY id (1) sql: --> SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = 'testgroup01' ORDER BY id (1) sql: Executing select query: SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = 'testgroup01' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (1) sql: Group "testgroup01": Merging reply items rlm_sql (sql): Released connection (1) Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=gradius host=localhost user=gradius password=password application_name='FreeRADIUS 3.0.13 - radiusd (sql)' Connected to database 'gradius' on 'localhost' server version 90224, protocol version 3, backend PID 19549 (1) [sql] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x627c163d627e126e (1) eap: Finished EAP session with state 0x627c163d627e126e (1) eap: Previous EAP request found for state 0x627c163d627e126e, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new EAP-TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 3 length 6 (1) eap: EAP session adding &reply:State = 0x627c163d637f0f6e (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 9 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (1) EAP-Message = 0x010300061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x627c163d637f0f6e07b4848fe40bd4b0 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 6 from 192.168.3.5:56875 to 192.168.3.33:1812 length 359 (2) User-Name = "testuser02" (2) NAS-IP-Address = 192.168.3.5 (2) NAS-Port = 0 (2) NAS-Identifier = "192.168.3.10" (2) NAS-Port-Type = Wireless-802.11 (2) Calling-Station-Id = "70bbe9363cbc" (2) Called-Station-Id = "aca31ec330ac" (2) Service-Type = Login-User (2) Framed-MTU = 1100 (2) EAP-Message = 0x0203009519800000008b16030100860100008203038787ca728f3d20c0a4de838f6cf765572f2d6a3461ced73c1d52eaa1f064378000002ac02bc02fc02cc030cca9cca8c009c023c013c027c00ac024c014c028009c009d002f003c0035003d000a0100002fff0100010000170000000d0010000e0403 (2) State = 0x627c163d637f0f6e07b4848fe40bd4b0 (2) Aruba-Essid-Name = "radius" (2) Aruba-Location-Id = "Turmeric-01" (2) Aruba-AP-Group = "Turmeric Cloud" (2) Aruba-Device-Type = "Linux" (2) Message-Authenticator = 0x7245eb45cbd355bc1412855b0774e92d (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 149 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x627c163d637f0f6e (2) eap: Finished EAP session with state 0x627c163d637f0f6e (2) eap: Previous EAP request found for state 0x627c163d637f0f6e, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 139 bytes (2) eap_peap: Got complete TLS record (139 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.2 [length 0086] (2) eap_peap: TLS_accept: SSLv3 read client hello A (2) eap_peap: >>> send TLS 1.2 [length 0039] (2) eap_peap: TLS_accept: SSLv3 write server hello A (2) eap_peap: >>> send TLS 1.2 [length 08d3] (2) eap_peap: TLS_accept: SSLv3 write certificate A (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3 write key exchange A (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3 write server done A (2) eap_peap: TLS_accept: SSLv3 flush data (2) eap_peap: TLS_accept: SSLv3 read client certificate A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: In SSL Handshake Phase (2) eap_peap: In SSL Accept mode (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1004 (2) eap: EAP session adding &reply:State = 0x627c163d60780f6e (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 6 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (2) EAP-Message = 0x010403ec19c000000a711603030039020000350303a05da85e59f6e086df9162dad171d4340b1878e2dd7807a8ce1f987b4e55c10e00c02f00000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x627c163d60780f6e07b4848fe40bd4b0 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 52 from 192.168.3.5:56875 to 192.168.3.33:1812 length 216 (3) User-Name = "testuser02" (3) NAS-IP-Address = 192.168.3.5 (3) NAS-Port = 0 (3) NAS-Identifier = "192.168.3.10" (3) NAS-Port-Type = Wireless-802.11 (3) Calling-Station-Id = "70bbe9363cbc" (3) Called-Station-Id = "aca31ec330ac" (3) Service-Type = Login-User (3) Framed-MTU = 1100 (3) EAP-Message = 0x020400061900 (3) State = 0x627c163d60780f6e07b4848fe40bd4b0 (3) Aruba-Essid-Name = "radius" (3) Aruba-Location-Id = "Turmeric-01" (3) Aruba-AP-Group = "Turmeric Cloud" (3) Aruba-Device-Type = "Linux" (3) Message-Authenticator = 0x3e21b713ea4856b4bcfe7d6b1068dccc (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x627c163d60780f6e (3) eap: Finished EAP session with state 0x627c163d60780f6e (3) eap: Previous EAP request found for state 0x627c163d60780f6e, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 1000 (3) eap: EAP session adding &reply:State = 0x627c163d61790f6e (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 52 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (3) EAP-Message = 0x010503e8194011313df5cf525bb740400f21166d6dd2bf666f6b2d653fbe1e4e46f7be988691083f7b177678383160f9febc8e14e9cb70fc830837eb79749f358db84a1f802f2436f34ab6eddf11b60004e8308204e4308203cca003020102020900b75741fcc163c18e300d06092a864886f70d01010b (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x627c163d61790f6e07b4848fe40bd4b0 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 3 from 192.168.3.5:56875 to 192.168.3.33:1812 length 216 (4) User-Name = "testuser02" (4) NAS-IP-Address = 192.168.3.5 (4) NAS-Port = 0 (4) NAS-Identifier = "192.168.3.10" (4) NAS-Port-Type = Wireless-802.11 (4) Calling-Station-Id = "70bbe9363cbc" (4) Called-Station-Id = "aca31ec330ac" (4) Service-Type = Login-User (4) Framed-MTU = 1100 (4) EAP-Message = 0x020500061900 (4) State = 0x627c163d61790f6e07b4848fe40bd4b0 (4) Aruba-Essid-Name = "radius" (4) Aruba-Location-Id = "Turmeric-01" (4) Aruba-AP-Group = "Turmeric Cloud" (4) Aruba-Device-Type = "Linux" (4) Message-Authenticator = 0xc716dca9a523dda0e32547fc332f1ba8 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x627c163d61790f6e (4) eap: Finished EAP session with state 0x627c163d61790f6e (4) eap: Previous EAP request found for state 0x627c163d61790f6e, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 691 (4) eap: EAP session adding &reply:State = 0x627c163d667a0f6e (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 3 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (4) EAP-Message = 0x010602b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101007543e1847fde7dabb9c05ecd0d5f2803b5b190af5952eff354ce11d6075fcd (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x627c163d667a0f6e07b4848fe40bd4b0 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 42 from 192.168.3.5:56875 to 192.168.3.33:1812 length 346 (5) User-Name = "testuser02" (5) NAS-IP-Address = 192.168.3.5 (5) NAS-Port = 0 (5) NAS-Identifier = "192.168.3.10" (5) NAS-Port-Type = Wireless-802.11 (5) Calling-Station-Id = "70bbe9363cbc" (5) Called-Station-Id = "aca31ec330ac" (5) Service-Type = Login-User (5) Framed-MTU = 1100 (5) EAP-Message = 0x0206008819800000007e1603030046100000424104677c881ea1396da9c781951dea939993085c6171f1842e96fa6a7c1a8936217e7bd4a72005d03ce651941b4374c82f72b8e8c9188f07ef54b696e1280e19f2fe140303000101160303002800000000000000007a02b9be8b0c19085f673229fe3d7d (5) State = 0x627c163d667a0f6e07b4848fe40bd4b0 (5) Aruba-Essid-Name = "radius" (5) Aruba-Location-Id = "Turmeric-01" (5) Aruba-AP-Group = "Turmeric Cloud" (5) Aruba-Device-Type = "Linux" (5) Message-Authenticator = 0xf17dc1e53e370de5daded924537f4691 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x627c163d667a0f6e (5) eap: Finished EAP session with state 0x627c163d667a0f6e (5) eap: Previous EAP request found for state 0x627c163d667a0f6e, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: SSLv3 read client key exchange A (5) eap_peap: TLS_accept: SSLv3 read certificate verify A (5) eap_peap: <<< recv TLS 1.2 [length 0001] (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 read finished A (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: SSLv3 write change cipher spec A (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3 write finished A (5) eap_peap: TLS_accept: SSLv3 flush data (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 7 length 57 (5) eap: EAP session adding &reply:State = 0x627c163d677b0f6e (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 42 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (5) EAP-Message = 0x010700391900140303000101160303002865a3d9994a1967b46da47576d24cdea6eca818625ad0fbc836e244b99062a435781eeae1aeb902af (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x627c163d677b0f6e07b4848fe40bd4b0 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 11 from 192.168.3.5:56875 to 192.168.3.33:1812 length 216 (6) User-Name = "testuser02" (6) NAS-IP-Address = 192.168.3.5 (6) NAS-Port = 0 (6) NAS-Identifier = "192.168.3.10" (6) NAS-Port-Type = Wireless-802.11 (6) Calling-Station-Id = "70bbe9363cbc" (6) Called-Station-Id = "aca31ec330ac" (6) Service-Type = Login-User (6) Framed-MTU = 1100 (6) EAP-Message = 0x020700061900 (6) State = 0x627c163d677b0f6e07b4848fe40bd4b0 (6) Aruba-Essid-Name = "radius" (6) Aruba-Location-Id = "Turmeric-01" (6) Aruba-AP-Group = "Turmeric Cloud" (6) Aruba-Device-Type = "Linux" (6) Message-Authenticator = 0xfdfd91f9807fab9c932798ac39afc1cf (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x627c163d677b0f6e (6) eap: Finished EAP session with state 0x627c163d677b0f6e (6) eap: Previous EAP request found for state 0x627c163d677b0f6e, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 8 length 40 (6) eap: EAP session adding &reply:State = 0x627c163d64740f6e (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 11 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (6) EAP-Message = 0x010800281900170303001d65a3d9994a1967b5664bc49caebfbe1d35c606a8ce988c403b74e8e8c3 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x627c163d64740f6e07b4848fe40bd4b0 (6) Finished request Waking up in 4.8 seconds. (7) Received Access-Request Id 43 from 192.168.3.5:56875 to 192.168.3.33:1812 length 256 (7) User-Name = "testuser02" (7) NAS-IP-Address = 192.168.3.5 (7) NAS-Port = 0 (7) NAS-Identifier = "192.168.3.10" (7) NAS-Port-Type = Wireless-802.11 (7) Calling-Station-Id = "70bbe9363cbc" (7) Called-Station-Id = "aca31ec330ac" (7) Service-Type = Login-User (7) Framed-MTU = 1100 (7) EAP-Message = 0x0208002e1900170303002300000000000000013a210301ddf8e2f0a3ac2e86ecbf9cd8f1266382b55f4cf13d9c2f (7) State = 0x627c163d64740f6e07b4848fe40bd4b0 (7) Aruba-Essid-Name = "radius" (7) Aruba-Location-Id = "Turmeric-01" (7) Aruba-AP-Group = "Turmeric Cloud" (7) Aruba-Device-Type = "Linux" (7) Message-Authenticator = 0x4a034454f1e3862b022bae42a623f215 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 46 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x627c163d64740f6e (7) eap: Finished EAP session with state 0x627c163d64740f6e (7) eap: Previous EAP request found for state 0x627c163d64740f6e, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - testuser02 (7) eap_peap: Got inner identity 'testuser02' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0208000f0174657374757365723032 (7) eap_peap: Setting User-Name to testuser02 (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0208000f0174657374757365723032 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "testuser02" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0208000f0174657374757365723032 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "testuser02" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 15 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: Issuing Challenge (7) eap: Sending EAP Request (code 1) ID 9 length 43 (7) eap: EAP session adding &reply:State = 0x42b2013e42bb1bfb (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x0109002b1a0109002610f689dd6d772590f68cb0d9e9a2562afa667265657261646975732d332e302e3133 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x42b2013e42bb1bfb13b28cac640455be (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x0109002b1a0109002610f689dd6d772590f68cb0d9e9a2562afa667265657261646975732d332e302e3133 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x42b2013e42bb1bfb13b28cac640455be (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x0109002b1a0109002610f689dd6d772590f68cb0d9e9a2562afa667265657261646975732d332e302e3133 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x42b2013e42bb1bfb13b28cac640455be (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 9 length 74 (7) eap: EAP session adding &reply:State = 0x627c163d65750f6e (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 43 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (7) EAP-Message = 0x0109004a1900170303003f65a3d9994a1967b6714db09d3fe5580fae20ebacf03da2032a1b676a239d7926687462a78119a34127f1f07e7de26ccbfa853d491b90600962b2bcb9789730 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x627c163d65750f6e07b4848fe40bd4b0 (7) Finished request Waking up in 4.8 seconds. (8) Received Access-Request Id 44 from 192.168.3.5:56875 to 192.168.3.33:1812 length 310 (8) User-Name = "testuser02" (8) NAS-IP-Address = 192.168.3.5 (8) NAS-Port = 0 (8) NAS-Identifier = "192.168.3.10" (8) NAS-Port-Type = Wireless-802.11 (8) Calling-Station-Id = "70bbe9363cbc" (8) Called-Station-Id = "aca31ec330ac" (8) Service-Type = Login-User (8) Framed-MTU = 1100 (8) EAP-Message = 0x0209006419001703030059000000000000000233bd13e70e6193d2e1d201a1859419a8c22e700ff76df122f6865d2be5a768280822ed57af65dfcb1e5c045c9e822bf193ffe97529d6aeba75f7f109fdab62c8298fdb8464988f919cba98d1c9679ff798 (8) State = 0x627c163d65750f6e07b4848fe40bd4b0 (8) Aruba-Essid-Name = "radius" (8) Aruba-Location-Id = "Turmeric-01" (8) Aruba-AP-Group = "Turmeric Cloud" (8) Aruba-Device-Type = "Linux" (8) Message-Authenticator = 0xc73b19a6eedf5e84787f4db950cb1bf3 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 100 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x42b2013e42bb1bfb (8) eap: Finished EAP session with state 0x627c163d65750f6e (8) eap: Previous EAP request found for state 0x627c163d65750f6e, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x020900451a020900403125049d77c3928bdcf4b0a55550a683b90000000000000000c9ca60edc09f5cfcb48ba5ad825b1c3b96737d2e6432a9450074657374757365723032 (8) eap_peap: Setting User-Name to testuser02 (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x020900451a020900403125049d77c3928bdcf4b0a55550a683b90000000000000000c9ca60edc09f5cfcb48ba5ad825b1c3b96737d2e6432a9450074657374757365723032 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "testuser02" (8) eap_peap: State = 0x42b2013e42bb1bfb13b28cac640455be (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x020900451a020900403125049d77c3928bdcf4b0a55550a683b90000000000000000c9ca60edc09f5cfcb48ba5ad825b1c3b96737d2e6432a9450074657374757365723032 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "testuser02" (8) State = 0x42b2013e42bb1bfb13b28cac640455be (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 69 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop (8) sql: EXPAND %{User-Name} (8) sql: --> testuser02 (8) sql: SQL-User-Name set to 'testuser02' rlm_sql (sql): Reserved connection (2) (8) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (8) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser02' ORDER BY id (8) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser02' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 2 , fields = 5 (8) sql: User found in radcheck table (8) sql: EXPAND SELECT group_name FROM radusergroup WHERE username='%{SQL-User-Name}' ORDER BY priority (8) sql: --> SELECT group_name FROM radusergroup WHERE username='testuser02' ORDER BY priority (8) sql: Executing select query: SELECT group_name FROM radusergroup WHERE username='testuser02' ORDER BY priority rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 (8) sql: User found in the group table (8) sql: EXPAND SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = '%{SQL-Group}' ORDER BY id (8) sql: --> SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = 'testgroup01' ORDER BY id (8) sql: Executing select query: SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = 'testgroup01' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (8) sql: Group "testgroup01": Conditional check items matched (8) sql: Group "testgroup01": Merging assignment check items (8) sql: EXPAND SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = '%{SQL-Group}' ORDER BY id (8) sql: --> SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = 'testgroup01' ORDER BY id (8) sql: Executing select query: SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = 'testgroup01' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (8) sql: Group "testgroup01": Merging reply items rlm_sql (sql): Released connection (2) (8) [sql] = ok (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x42b2013e42bb1bfb (8) eap: Finished EAP session with state 0x42b2013e42bb1bfb (8) eap: Previous EAP request found for state 0x42b2013e42bb1bfb, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (8) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (8) mschap: Creating challenge hash with username: testuser02 (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject (8) } # authenticate = reject (8) eap: Sending EAP Failure (code 4) ID 9 length 4 (8) eap: Freeing handler (8) [eap] = reject (8) } # authenticate = reject (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (8) Post-Auth-Type REJECT { (8) sql: EXPAND .query (8) sql: --> .query (8) sql: Using query template 'query' rlm_sql (sql): Reserved connection (3) (8) sql: EXPAND %{User-Name} (8) sql: --> testuser02 (8) sql: SQL-User-Name set to 'testuser02' (8) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', NOW()) (8) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('testuser02', 'Chap-Password', 'Access-Reject', NOW()) (8) sql: EXPAND /var/log/radius/sqllog.sql (8) sql: --> /var/log/radius/sqllog.sql (8) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('testuser02', 'Chap-Password', 'Access-Reject', NOW()) rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 1 (8) sql: SQL query returned: success (8) sql: 1 record(s) updated rlm_sql (sql): Released connection (3) (8) [sql] = ok (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> testuser02 (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) update outer.session-state { (8) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication' (8) } # update outer.session-state = noop (8) } # Post-Auth-Type REJECT = updated (8) } # server inner-tunnel (8) Virtual server sending reply (8) MS-CHAP-Error = "\tE=691 R=1 C=c2a6eb1cd7f63e962e3330f2bc0ec06e V=3 M=Authentication failed" (8) EAP-Message = 0x04090004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply code 3 (8) eap_peap: MS-CHAP-Error = "\tE=691 R=1 C=c2a6eb1cd7f63e962e3330f2bc0ec06e V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04090004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply RADIUS code 3 (8) eap_peap: MS-CHAP-Error = "\tE=691 R=1 C=c2a6eb1cd7f63e962e3330f2bc0ec06e V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04090004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Tunneled authentication was rejected (8) eap_peap: FAILURE (8) eap: Sending EAP Request (code 1) ID 10 length 46 (8) eap: EAP session adding &reply:State = 0x627c163d6a760f6e (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/raddb/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) session-state: Saving cached attributes (8) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (8) Sent Access-Challenge Id 44 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (8) EAP-Message = 0x010a002e1900170303002365a3d9994a1967b7701d4cdf0da9f3e57692375bd22baf8e56db37059778b74546d25c (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x627c163d6a760f6e07b4848fe40bd4b0 (8) Finished request Waking up in 4.8 seconds. (9) Received Access-Request Id 45 from 192.168.3.5:56875 to 192.168.3.33:1812 length 256 (9) User-Name = "testuser02" (9) NAS-IP-Address = 192.168.3.5 (9) NAS-Port = 0 (9) NAS-Identifier = "192.168.3.10" (9) NAS-Port-Type = Wireless-802.11 (9) Calling-Station-Id = "70bbe9363cbc" (9) Called-Station-Id = "aca31ec330ac" (9) Service-Type = Login-User (9) Framed-MTU = 1100 (9) EAP-Message = 0x020a002e190017030300230000000000000003221984b83090ecb853503ed74d2083c43e0de4f0140366f1a3f055 (9) State = 0x627c163d6a760f6e07b4848fe40bd4b0 (9) Aruba-Essid-Name = "radius" (9) Aruba-Location-Id = "Turmeric-01" (9) Aruba-AP-Group = "Turmeric Cloud" (9) Aruba-Device-Type = "Linux" (9) Message-Authenticator = 0x4c9c4bfefe913407e7f20174484f5af5 (9) Restoring &session-state (9) &session-state:Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (9) # Executing section authorize from file /etc/raddb/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 10 length 46 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x627c163d6a760f6e (9) eap: Finished EAP session with state 0x627c163d6a760f6e (9) eap: Previous EAP request found for state 0x627c163d6a760f6e, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv failure (9) eap_peap: Received EAP-TLV response (9) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (9) eap_peap: This means you need to read the PREVIOUS messages in the debug output (9) eap_peap: to find out the reason why the user was rejected (9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (9) eap_peap: what went wrong, and how to fix the problem (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (9) eap: Sending EAP Failure (code 4) ID 10 length 4 (9) eap: Failed in EAP select (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /etc/raddb/sites-enabled/default (9) Post-Auth-Type REJECT { (9) sql: EXPAND .query (9) sql: --> .query (9) sql: Using query template 'query' rlm_sql (sql): Reserved connection (4) (9) sql: EXPAND %{User-Name} (9) sql: --> testuser02 (9) sql: SQL-User-Name set to 'testuser02' (9) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', NOW()) (9) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('testuser02', 'Chap-Password', 'Access-Reject', NOW()) (9) sql: EXPAND /var/log/radius/sqllog.sql (9) sql: --> /var/log/radius/sqllog.sql (9) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('testuser02', 'Chap-Password', 'Access-Reject', NOW()) rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 1 (9) sql: SQL query returned: success (9) sql: 1 record(s) updated rlm_sql (sql): Released connection (4) (9) [sql] = ok (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> testuser02 (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 45 from 192.168.3.33:1812 to 192.168.3.5:56875 length 44 (9) EAP-Message = 0x040a0004 (9) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (0) Cleaning up request packet ID 8 with timestamp +18 (1) Cleaning up request packet ID 9 with timestamp +18 (2) Cleaning up request packet ID 6 with timestamp +18 (3) Cleaning up request packet ID 52 with timestamp +18 (4) Cleaning up request packet ID 3 with timestamp +18 (5) Cleaning up request packet ID 42 with timestamp +18 (6) Cleaning up request packet ID 11 with timestamp +18 (7) Cleaning up request packet ID 43 with timestamp +18 (8) Cleaning up request packet ID 44 with timestamp +18 (9) Cleaning up request packet ID 45 with timestamp +18 Ready to process requests (10) Received Access-Request Id 47 from 192.168.3.5:56875 to 192.168.3.33:1812 length 207 (10) User-Name = "testuser02" (10) NAS-IP-Address = 192.168.3.5 (10) NAS-Port = 0 (10) NAS-Identifier = "192.168.3.10" (10) NAS-Port-Type = Wireless-802.11 (10) Calling-Station-Id = "70bbe9363cbc" (10) Called-Station-Id = "aca31ec330ac" (10) Service-Type = Login-User (10) Framed-MTU = 1100 (10) EAP-Message = 0x0201000f0174657374757365723032 (10) Aruba-Essid-Name = "radius" (10) Aruba-Location-Id = "Turmeric-01" (10) Aruba-AP-Group = "Turmeric Cloud" (10) Aruba-Device-Type = "Linux" (10) Message-Authenticator = 0xfc70c56cd3c0f5174106066318e1b6cc (10) # Executing section authorize from file /etc/raddb/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /@\./) { (10) if (&User-Name =~ /@\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 1 length 15 (10) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/raddb/sites-enabled/default (10) authenticate { (10) eap: Peer sent packet with method EAP Identity (1) (10) eap: Calling submodule eap_md5 to process data (10) eap_md5: Issuing MD5 Challenge (10) eap: Sending EAP Request (code 1) ID 2 length 22 (10) eap: EAP session adding &reply:State = 0xb172d43bb170d0e3 (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /etc/raddb/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) Sent Access-Challenge Id 47 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (10) EAP-Message = 0x010200160410b5c5cf47ddf220ecb3686cb4073bfbd0 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0xb172d43bb170d0e3cf1be57c2d2e9caa (10) Finished request Waking up in 4.9 seconds. (11) Received Access-Request Id 50 from 192.168.3.5:56875 to 192.168.3.33:1812 length 218 (11) User-Name = "testuser02" (11) NAS-IP-Address = 192.168.3.5 (11) NAS-Port = 0 (11) NAS-Identifier = "192.168.3.10" (11) NAS-Port-Type = Wireless-802.11 (11) Calling-Station-Id = "70bbe9363cbc" (11) Called-Station-Id = "aca31ec330ac" (11) Service-Type = Login-User (11) Framed-MTU = 1100 (11) EAP-Message = 0x0202000803191534 (11) State = 0xb172d43bb170d0e3cf1be57c2d2e9caa (11) Aruba-Essid-Name = "radius" (11) Aruba-Location-Id = "Turmeric-01" (11) Aruba-AP-Group = "Turmeric Cloud" (11) Aruba-Device-Type = "Linux" (11) Message-Authenticator = 0x9d85bd42fd32697c7767b8fc3d40365f (11) session-state: No cached attributes (11) # Executing section authorize from file /etc/raddb/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /@\./) { (11) if (&User-Name =~ /@\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 2 length 8 (11) eap: No EAP Start, assuming it's an on-going EAP conversation (11) [eap] = updated (11) [files] = noop (11) sql: EXPAND %{User-Name} (11) sql: --> testuser02 (11) sql: SQL-User-Name set to 'testuser02' rlm_sql (sql): Reserved connection (0) (11) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (11) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser02' ORDER BY id (11) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser02' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 2 , fields = 5 (11) sql: User found in radcheck table (11) sql: Conditional check items matched, merging assignment check items (11) sql: Cleartext-Password := "password" (11) sql: EXPAND SELECT id, userName, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (11) sql: --> SELECT id, userName, attribute, value, op FROM radreply WHERE username = 'testuser02' ORDER BY id (11) sql: Executing select query: SELECT id, userName, attribute, value, op FROM radreply WHERE username = 'testuser02' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (11) sql: EXPAND SELECT group_name FROM radusergroup WHERE username='%{SQL-User-Name}' ORDER BY priority (11) sql: --> SELECT group_name FROM radusergroup WHERE username='testuser02' ORDER BY priority (11) sql: Executing select query: SELECT group_name FROM radusergroup WHERE username='testuser02' ORDER BY priority rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 (11) sql: User found in the group table (11) sql: EXPAND SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = '%{SQL-Group}' ORDER BY id (11) sql: --> SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = 'testgroup01' ORDER BY id (11) sql: Executing select query: SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = 'testgroup01' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (11) sql: Group "testgroup01": Conditional check items matched (11) sql: Group "testgroup01": Merging assignment check items (11) sql: EXPAND SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = '%{SQL-Group}' ORDER BY id (11) sql: --> SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = 'testgroup01' ORDER BY id (11) sql: Executing select query: SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = 'testgroup01' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (11) sql: Group "testgroup01": Merging reply items rlm_sql (sql): Released connection (0) Need 3 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used rlm_sql_postgresql: Connecting using parameters: dbname=gradius host=localhost user=gradius password=password application_name='FreeRADIUS 3.0.13 - radiusd (sql)' Connected to database 'gradius' on 'localhost' server version 90224, protocol version 3, backend PID 19551 (11) [sql] = ok (11) [expiration] = noop (11) [logintime] = noop (11) pap: WARNING: Auth-Type already set. Not setting to PAP (11) [pap] = noop (11) } # authorize = updated (11) Found Auth-Type = eap (11) # Executing group from file /etc/raddb/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0xb172d43bb170d0e3 (11) eap: Finished EAP session with state 0xb172d43bb170d0e3 (11) eap: Previous EAP request found for state 0xb172d43bb170d0e3, released from the list (11) eap: Peer sent packet with method EAP NAK (3) (11) eap: Found mutually acceptable type PEAP (25) (11) eap: Calling submodule eap_peap to process data (11) eap_peap: Initiating new EAP-TLS session (11) eap_peap: [eaptls start] = request (11) eap: Sending EAP Request (code 1) ID 3 length 6 (11) eap: EAP session adding &reply:State = 0xb172d43bb071cde3 (11) [eap] = handled (11) } # authenticate = handled (11) Using Post-Auth-Type Challenge (11) # Executing group from file /etc/raddb/sites-enabled/default (11) Challenge { ... } # empty sub-section is ignored (11) Sent Access-Challenge Id 50 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (11) EAP-Message = 0x010300061920 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) State = 0xb172d43bb071cde3cf1be57c2d2e9caa (11) Finished request Waking up in 4.9 seconds. (12) Received Access-Request Id 46 from 192.168.3.5:56875 to 192.168.3.33:1812 length 359 (12) User-Name = "testuser02" (12) NAS-IP-Address = 192.168.3.5 (12) NAS-Port = 0 (12) NAS-Identifier = "192.168.3.10" (12) NAS-Port-Type = Wireless-802.11 (12) Calling-Station-Id = "70bbe9363cbc" (12) Called-Station-Id = "aca31ec330ac" (12) Service-Type = Login-User (12) Framed-MTU = 1100 (12) EAP-Message = 0x0203009519800000008b160301008601000082030354f19277ffaf59b9778e9e5f1a9bfb58268eaeb427a308b33c23c92398f8d80c00002ac02bc02fc02cc030cca9cca8c009c023c013c027c00ac024c014c028009c009d002f003c0035003d000a0100002fff0100010000170000000d0010000e0403 (12) State = 0xb172d43bb071cde3cf1be57c2d2e9caa (12) Aruba-Essid-Name = "radius" (12) Aruba-Location-Id = "Turmeric-01" (12) Aruba-AP-Group = "Turmeric Cloud" (12) Aruba-Device-Type = "Linux" (12) Message-Authenticator = 0x704e153c95e34bc0715d7f8fba3c941d (12) session-state: No cached attributes (12) # Executing section authorize from file /etc/raddb/sites-enabled/default (12) authorize { (12) policy filter_username { (12) if (&User-Name) { (12) if (&User-Name) -> TRUE (12) if (&User-Name) { (12) if (&User-Name =~ / /) { (12) if (&User-Name =~ / /) -> FALSE (12) if (&User-Name =~ /@[^@]*@/ ) { (12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (12) if (&User-Name =~ /\.\./ ) { (12) if (&User-Name =~ /\.\./ ) -> FALSE (12) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (12) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (12) if (&User-Name =~ /\.$/) { (12) if (&User-Name =~ /\.$/) -> FALSE (12) if (&User-Name =~ /@\./) { (12) if (&User-Name =~ /@\./) -> FALSE (12) } # if (&User-Name) = notfound (12) } # policy filter_username = notfound (12) [preprocess] = ok (12) [chap] = noop (12) [mschap] = noop (12) [digest] = noop (12) suffix: Checking for suffix after "@" (12) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (12) suffix: No such realm "NULL" (12) [suffix] = noop (12) eap: Peer sent EAP Response (code 2) ID 3 length 149 (12) eap: Continuing tunnel setup (12) [eap] = ok (12) } # authorize = ok (12) Found Auth-Type = eap (12) # Executing group from file /etc/raddb/sites-enabled/default (12) authenticate { (12) eap: Expiring EAP session with state 0xb172d43bb071cde3 (12) eap: Finished EAP session with state 0xb172d43bb071cde3 (12) eap: Previous EAP request found for state 0xb172d43bb071cde3, released from the list (12) eap: Peer sent packet with method EAP PEAP (25) (12) eap: Calling submodule eap_peap to process data (12) eap_peap: Continuing EAP-TLS (12) eap_peap: Peer indicated complete TLS record size will be 139 bytes (12) eap_peap: Got complete TLS record (139 bytes) (12) eap_peap: [eaptls verify] = length included (12) eap_peap: (other): before/accept initialization (12) eap_peap: TLS_accept: before/accept initialization (12) eap_peap: <<< recv TLS 1.2 [length 0086] (12) eap_peap: TLS_accept: SSLv3 read client hello A (12) eap_peap: >>> send TLS 1.2 [length 0039] (12) eap_peap: TLS_accept: SSLv3 write server hello A (12) eap_peap: >>> send TLS 1.2 [length 08d3] (12) eap_peap: TLS_accept: SSLv3 write certificate A (12) eap_peap: >>> send TLS 1.2 [length 014d] (12) eap_peap: TLS_accept: SSLv3 write key exchange A (12) eap_peap: >>> send TLS 1.2 [length 0004] (12) eap_peap: TLS_accept: SSLv3 write server done A (12) eap_peap: TLS_accept: SSLv3 flush data (12) eap_peap: TLS_accept: SSLv3 read client certificate A (12) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (12) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (12) eap_peap: In SSL Handshake Phase (12) eap_peap: In SSL Accept mode (12) eap_peap: [eaptls process] = handled (12) eap: Sending EAP Request (code 1) ID 4 length 1004 (12) eap: EAP session adding &reply:State = 0xb172d43bb376cde3 (12) [eap] = handled (12) } # authenticate = handled (12) Using Post-Auth-Type Challenge (12) # Executing group from file /etc/raddb/sites-enabled/default (12) Challenge { ... } # empty sub-section is ignored (12) Sent Access-Challenge Id 46 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (12) EAP-Message = 0x010403ec19c000000a711603030039020000350303345544bcd197093a2ab3e88991be8261c8126232a20816bc0ff149cc0fca980a00c02f00000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030 (12) Message-Authenticator = 0x00000000000000000000000000000000 (12) State = 0xb172d43bb376cde3cf1be57c2d2e9caa (12) Finished request Waking up in 4.9 seconds. (13) Received Access-Request Id 53 from 192.168.3.5:56875 to 192.168.3.33:1812 length 216 (13) User-Name = "testuser02" (13) NAS-IP-Address = 192.168.3.5 (13) NAS-Port = 0 (13) NAS-Identifier = "192.168.3.10" (13) NAS-Port-Type = Wireless-802.11 (13) Calling-Station-Id = "70bbe9363cbc" (13) Called-Station-Id = "aca31ec330ac" (13) Service-Type = Login-User (13) Framed-MTU = 1100 (13) EAP-Message = 0x020400061900 (13) State = 0xb172d43bb376cde3cf1be57c2d2e9caa (13) Aruba-Essid-Name = "radius" (13) Aruba-Location-Id = "Turmeric-01" (13) Aruba-AP-Group = "Turmeric Cloud" (13) Aruba-Device-Type = "Linux" (13) Message-Authenticator = 0x17cfbf0da20dcab90cc7e33ea03cd543 (13) session-state: No cached attributes (13) # Executing section authorize from file /etc/raddb/sites-enabled/default (13) authorize { (13) policy filter_username { (13) if (&User-Name) { (13) if (&User-Name) -> TRUE (13) if (&User-Name) { (13) if (&User-Name =~ / /) { (13) if (&User-Name =~ / /) -> FALSE (13) if (&User-Name =~ /@[^@]*@/ ) { (13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (13) if (&User-Name =~ /\.\./ ) { (13) if (&User-Name =~ /\.\./ ) -> FALSE (13) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (13) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (13) if (&User-Name =~ /\.$/) { (13) if (&User-Name =~ /\.$/) -> FALSE (13) if (&User-Name =~ /@\./) { (13) if (&User-Name =~ /@\./) -> FALSE (13) } # if (&User-Name) = notfound (13) } # policy filter_username = notfound (13) [preprocess] = ok (13) [chap] = noop (13) [mschap] = noop (13) [digest] = noop (13) suffix: Checking for suffix after "@" (13) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (13) suffix: No such realm "NULL" (13) [suffix] = noop (13) eap: Peer sent EAP Response (code 2) ID 4 length 6 (13) eap: Continuing tunnel setup (13) [eap] = ok (13) } # authorize = ok (13) Found Auth-Type = eap (13) # Executing group from file /etc/raddb/sites-enabled/default (13) authenticate { (13) eap: Expiring EAP session with state 0xb172d43bb376cde3 (13) eap: Finished EAP session with state 0xb172d43bb376cde3 (13) eap: Previous EAP request found for state 0xb172d43bb376cde3, released from the list (13) eap: Peer sent packet with method EAP PEAP (25) (13) eap: Calling submodule eap_peap to process data (13) eap_peap: Continuing EAP-TLS (13) eap_peap: Peer ACKed our handshake fragment (13) eap_peap: [eaptls verify] = request (13) eap_peap: [eaptls process] = handled (13) eap: Sending EAP Request (code 1) ID 5 length 1000 (13) eap: EAP session adding &reply:State = 0xb172d43bb277cde3 (13) [eap] = handled (13) } # authenticate = handled (13) Using Post-Auth-Type Challenge (13) # Executing group from file /etc/raddb/sites-enabled/default (13) Challenge { ... } # empty sub-section is ignored (13) Sent Access-Challenge Id 53 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (13) EAP-Message = 0x010503e8194011313df5cf525bb740400f21166d6dd2bf666f6b2d653fbe1e4e46f7be988691083f7b177678383160f9febc8e14e9cb70fc830837eb79749f358db84a1f802f2436f34ab6eddf11b60004e8308204e4308203cca003020102020900b75741fcc163c18e300d06092a864886f70d01010b (13) Message-Authenticator = 0x00000000000000000000000000000000 (13) State = 0xb172d43bb277cde3cf1be57c2d2e9caa (13) Finished request Waking up in 4.9 seconds. (14) Received Access-Request Id 54 from 192.168.3.5:56875 to 192.168.3.33:1812 length 216 (14) User-Name = "testuser02" (14) NAS-IP-Address = 192.168.3.5 (14) NAS-Port = 0 (14) NAS-Identifier = "192.168.3.10" (14) NAS-Port-Type = Wireless-802.11 (14) Calling-Station-Id = "70bbe9363cbc" (14) Called-Station-Id = "aca31ec330ac" (14) Service-Type = Login-User (14) Framed-MTU = 1100 (14) EAP-Message = 0x020500061900 (14) State = 0xb172d43bb277cde3cf1be57c2d2e9caa (14) Aruba-Essid-Name = "radius" (14) Aruba-Location-Id = "Turmeric-01" (14) Aruba-AP-Group = "Turmeric Cloud" (14) Aruba-Device-Type = "Linux" (14) Message-Authenticator = 0xef1f0919975212c6a1529542fa3da6fc (14) session-state: No cached attributes (14) # Executing section authorize from file /etc/raddb/sites-enabled/default (14) authorize { (14) policy filter_username { (14) if (&User-Name) { (14) if (&User-Name) -> TRUE (14) if (&User-Name) { (14) if (&User-Name =~ / /) { (14) if (&User-Name =~ / /) -> FALSE (14) if (&User-Name =~ /@[^@]*@/ ) { (14) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (14) if (&User-Name =~ /\.\./ ) { (14) if (&User-Name =~ /\.\./ ) -> FALSE (14) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (14) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (14) if (&User-Name =~ /\.$/) { (14) if (&User-Name =~ /\.$/) -> FALSE (14) if (&User-Name =~ /@\./) { (14) if (&User-Name =~ /@\./) -> FALSE (14) } # if (&User-Name) = notfound (14) } # policy filter_username = notfound (14) [preprocess] = ok (14) [chap] = noop (14) [mschap] = noop (14) [digest] = noop (14) suffix: Checking for suffix after "@" (14) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (14) suffix: No such realm "NULL" (14) [suffix] = noop (14) eap: Peer sent EAP Response (code 2) ID 5 length 6 (14) eap: Continuing tunnel setup (14) [eap] = ok (14) } # authorize = ok (14) Found Auth-Type = eap (14) # Executing group from file /etc/raddb/sites-enabled/default (14) authenticate { (14) eap: Expiring EAP session with state 0xb172d43bb277cde3 (14) eap: Finished EAP session with state 0xb172d43bb277cde3 (14) eap: Previous EAP request found for state 0xb172d43bb277cde3, released from the list (14) eap: Peer sent packet with method EAP PEAP (25) (14) eap: Calling submodule eap_peap to process data (14) eap_peap: Continuing EAP-TLS (14) eap_peap: Peer ACKed our handshake fragment (14) eap_peap: [eaptls verify] = request (14) eap_peap: [eaptls process] = handled (14) eap: Sending EAP Request (code 1) ID 6 length 691 (14) eap: EAP session adding &reply:State = 0xb172d43bb574cde3 (14) [eap] = handled (14) } # authenticate = handled (14) Using Post-Auth-Type Challenge (14) # Executing group from file /etc/raddb/sites-enabled/default (14) Challenge { ... } # empty sub-section is ignored (14) Sent Access-Challenge Id 54 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (14) EAP-Message = 0x010602b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101007543e1847fde7dabb9c05ecd0d5f2803b5b190af5952eff354ce11d6075fcd (14) Message-Authenticator = 0x00000000000000000000000000000000 (14) State = 0xb172d43bb574cde3cf1be57c2d2e9caa (14) Finished request Waking up in 4.9 seconds. (15) Received Access-Request Id 55 from 192.168.3.5:56875 to 192.168.3.33:1812 length 346 (15) User-Name = "testuser02" (15) NAS-IP-Address = 192.168.3.5 (15) NAS-Port = 0 (15) NAS-Identifier = "192.168.3.10" (15) NAS-Port-Type = Wireless-802.11 (15) Calling-Station-Id = "70bbe9363cbc" (15) Called-Station-Id = "aca31ec330ac" (15) Service-Type = Login-User (15) Framed-MTU = 1100 (15) EAP-Message = 0x0206008819800000007e1603030046100000424104582eafafaf9e4a61a75f68119c0f8411d48c753e4c760ecd5f5aa913f2cc43aeba84561815ec0f6eb45decd6024c8ccc28ceaff9814284201362c7791d60685014030300010116030300280000000000000000f2489a3814da1b134ddb0b9682b333 (15) State = 0xb172d43bb574cde3cf1be57c2d2e9caa (15) Aruba-Essid-Name = "radius" (15) Aruba-Location-Id = "Turmeric-01" (15) Aruba-AP-Group = "Turmeric Cloud" (15) Aruba-Device-Type = "Linux" (15) Message-Authenticator = 0xeea12ddee8436f33ad2ca0c7439f7c1c (15) session-state: No cached attributes (15) # Executing section authorize from file /etc/raddb/sites-enabled/default (15) authorize { (15) policy filter_username { (15) if (&User-Name) { (15) if (&User-Name) -> TRUE (15) if (&User-Name) { (15) if (&User-Name =~ / /) { (15) if (&User-Name =~ / /) -> FALSE (15) if (&User-Name =~ /@[^@]*@/ ) { (15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (15) if (&User-Name =~ /\.\./ ) { (15) if (&User-Name =~ /\.\./ ) -> FALSE (15) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (15) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (15) if (&User-Name =~ /\.$/) { (15) if (&User-Name =~ /\.$/) -> FALSE (15) if (&User-Name =~ /@\./) { (15) if (&User-Name =~ /@\./) -> FALSE (15) } # if (&User-Name) = notfound (15) } # policy filter_username = notfound (15) [preprocess] = ok (15) [chap] = noop (15) [mschap] = noop (15) [digest] = noop (15) suffix: Checking for suffix after "@" (15) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (15) suffix: No such realm "NULL" (15) [suffix] = noop (15) eap: Peer sent EAP Response (code 2) ID 6 length 136 (15) eap: Continuing tunnel setup (15) [eap] = ok (15) } # authorize = ok (15) Found Auth-Type = eap (15) # Executing group from file /etc/raddb/sites-enabled/default (15) authenticate { (15) eap: Expiring EAP session with state 0xb172d43bb574cde3 (15) eap: Finished EAP session with state 0xb172d43bb574cde3 (15) eap: Previous EAP request found for state 0xb172d43bb574cde3, released from the list (15) eap: Peer sent packet with method EAP PEAP (25) (15) eap: Calling submodule eap_peap to process data (15) eap_peap: Continuing EAP-TLS (15) eap_peap: Peer indicated complete TLS record size will be 126 bytes (15) eap_peap: Got complete TLS record (126 bytes) (15) eap_peap: [eaptls verify] = length included (15) eap_peap: <<< recv TLS 1.2 [length 0046] (15) eap_peap: TLS_accept: SSLv3 read client key exchange A (15) eap_peap: TLS_accept: SSLv3 read certificate verify A (15) eap_peap: <<< recv TLS 1.2 [length 0001] (15) eap_peap: <<< recv TLS 1.2 [length 0010] (15) eap_peap: TLS_accept: SSLv3 read finished A (15) eap_peap: >>> send TLS 1.2 [length 0001] (15) eap_peap: TLS_accept: SSLv3 write change cipher spec A (15) eap_peap: >>> send TLS 1.2 [length 0010] (15) eap_peap: TLS_accept: SSLv3 write finished A (15) eap_peap: TLS_accept: SSLv3 flush data (15) eap_peap: (other): SSL negotiation finished successfully (15) eap_peap: SSL Connection Established (15) eap_peap: [eaptls process] = handled (15) eap: Sending EAP Request (code 1) ID 7 length 57 (15) eap: EAP session adding &reply:State = 0xb172d43bb475cde3 (15) [eap] = handled (15) } # authenticate = handled (15) Using Post-Auth-Type Challenge (15) # Executing group from file /etc/raddb/sites-enabled/default (15) Challenge { ... } # empty sub-section is ignored (15) Sent Access-Challenge Id 55 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (15) EAP-Message = 0x01070039190014030300010116030300289596a328dd4626bea7dd3ad9bdb5b31b402004424e958bfc9db822d21799a69d8fa029206b9b07f2 (15) Message-Authenticator = 0x00000000000000000000000000000000 (15) State = 0xb172d43bb475cde3cf1be57c2d2e9caa (15) Finished request Waking up in 4.9 seconds. (16) Received Access-Request Id 56 from 192.168.3.5:56875 to 192.168.3.33:1812 length 216 (16) User-Name = "testuser02" (16) NAS-IP-Address = 192.168.3.5 (16) NAS-Port = 0 (16) NAS-Identifier = "192.168.3.10" (16) NAS-Port-Type = Wireless-802.11 (16) Calling-Station-Id = "70bbe9363cbc" (16) Called-Station-Id = "aca31ec330ac" (16) Service-Type = Login-User (16) Framed-MTU = 1100 (16) EAP-Message = 0x020700061900 (16) State = 0xb172d43bb475cde3cf1be57c2d2e9caa (16) Aruba-Essid-Name = "radius" (16) Aruba-Location-Id = "Turmeric-01" (16) Aruba-AP-Group = "Turmeric Cloud" (16) Aruba-Device-Type = "Linux" (16) Message-Authenticator = 0x37bd7d04b22a996475dff494cb61b767 (16) session-state: No cached attributes (16) # Executing section authorize from file /etc/raddb/sites-enabled/default (16) authorize { (16) policy filter_username { (16) if (&User-Name) { (16) if (&User-Name) -> TRUE (16) if (&User-Name) { (16) if (&User-Name =~ / /) { (16) if (&User-Name =~ / /) -> FALSE (16) if (&User-Name =~ /@[^@]*@/ ) { (16) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (16) if (&User-Name =~ /\.\./ ) { (16) if (&User-Name =~ /\.\./ ) -> FALSE (16) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (16) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (16) if (&User-Name =~ /\.$/) { (16) if (&User-Name =~ /\.$/) -> FALSE (16) if (&User-Name =~ /@\./) { (16) if (&User-Name =~ /@\./) -> FALSE (16) } # if (&User-Name) = notfound (16) } # policy filter_username = notfound (16) [preprocess] = ok (16) [chap] = noop (16) [mschap] = noop (16) [digest] = noop (16) suffix: Checking for suffix after "@" (16) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (16) suffix: No such realm "NULL" (16) [suffix] = noop (16) eap: Peer sent EAP Response (code 2) ID 7 length 6 (16) eap: Continuing tunnel setup (16) [eap] = ok (16) } # authorize = ok (16) Found Auth-Type = eap (16) # Executing group from file /etc/raddb/sites-enabled/default (16) authenticate { (16) eap: Expiring EAP session with state 0xb172d43bb475cde3 (16) eap: Finished EAP session with state 0xb172d43bb475cde3 (16) eap: Previous EAP request found for state 0xb172d43bb475cde3, released from the list (16) eap: Peer sent packet with method EAP PEAP (25) (16) eap: Calling submodule eap_peap to process data (16) eap_peap: Continuing EAP-TLS (16) eap_peap: Peer ACKed our handshake fragment. handshake is finished (16) eap_peap: [eaptls verify] = success (16) eap_peap: [eaptls process] = success (16) eap_peap: Session established. Decoding tunneled attributes (16) eap_peap: PEAP state TUNNEL ESTABLISHED (16) eap: Sending EAP Request (code 1) ID 8 length 40 (16) eap: EAP session adding &reply:State = 0xb172d43bb77acde3 (16) [eap] = handled (16) } # authenticate = handled (16) Using Post-Auth-Type Challenge (16) # Executing group from file /etc/raddb/sites-enabled/default (16) Challenge { ... } # empty sub-section is ignored (16) Sent Access-Challenge Id 56 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (16) EAP-Message = 0x010800281900170303001d9596a328dd4626bfed969e326cf3e5e80944ab6e358c39e9859c628e76 (16) Message-Authenticator = 0x00000000000000000000000000000000 (16) State = 0xb172d43bb77acde3cf1be57c2d2e9caa (16) Finished request Waking up in 4.8 seconds. (17) Received Access-Request Id 62 from 192.168.3.5:56875 to 192.168.3.33:1812 length 256 (17) User-Name = "testuser02" (17) NAS-IP-Address = 192.168.3.5 (17) NAS-Port = 0 (17) NAS-Identifier = "192.168.3.10" (17) NAS-Port-Type = Wireless-802.11 (17) Calling-Station-Id = "70bbe9363cbc" (17) Called-Station-Id = "aca31ec330ac" (17) Service-Type = Login-User (17) Framed-MTU = 1100 (17) EAP-Message = 0x0208002e19001703030023000000000000000192678b753ff7173bb174abe49f427b87c5187b586b6bf3f729d189 (17) State = 0xb172d43bb77acde3cf1be57c2d2e9caa (17) Aruba-Essid-Name = "radius" (17) Aruba-Location-Id = "Turmeric-01" (17) Aruba-AP-Group = "Turmeric Cloud" (17) Aruba-Device-Type = "Linux" (17) Message-Authenticator = 0xdfd1a4be785be15fb58749adf01be229 (17) session-state: No cached attributes (17) # Executing section authorize from file /etc/raddb/sites-enabled/default (17) authorize { (17) policy filter_username { (17) if (&User-Name) { (17) if (&User-Name) -> TRUE (17) if (&User-Name) { (17) if (&User-Name =~ / /) { (17) if (&User-Name =~ / /) -> FALSE (17) if (&User-Name =~ /@[^@]*@/ ) { (17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (17) if (&User-Name =~ /\.\./ ) { (17) if (&User-Name =~ /\.\./ ) -> FALSE (17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (17) if (&User-Name =~ /\.$/) { (17) if (&User-Name =~ /\.$/) -> FALSE (17) if (&User-Name =~ /@\./) { (17) if (&User-Name =~ /@\./) -> FALSE (17) } # if (&User-Name) = notfound (17) } # policy filter_username = notfound (17) [preprocess] = ok (17) [chap] = noop (17) [mschap] = noop (17) [digest] = noop (17) suffix: Checking for suffix after "@" (17) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (17) suffix: No such realm "NULL" (17) [suffix] = noop (17) eap: Peer sent EAP Response (code 2) ID 8 length 46 (17) eap: Continuing tunnel setup (17) [eap] = ok (17) } # authorize = ok (17) Found Auth-Type = eap (17) # Executing group from file /etc/raddb/sites-enabled/default (17) authenticate { (17) eap: Expiring EAP session with state 0xb172d43bb77acde3 (17) eap: Finished EAP session with state 0xb172d43bb77acde3 (17) eap: Previous EAP request found for state 0xb172d43bb77acde3, released from the list (17) eap: Peer sent packet with method EAP PEAP (25) (17) eap: Calling submodule eap_peap to process data (17) eap_peap: Continuing EAP-TLS (17) eap_peap: [eaptls verify] = ok (17) eap_peap: Done initial handshake (17) eap_peap: [eaptls process] = ok (17) eap_peap: Session established. Decoding tunneled attributes (17) eap_peap: PEAP state WAITING FOR INNER IDENTITY (17) eap_peap: Identity - testuser02 (17) eap_peap: Got inner identity 'testuser02' (17) eap_peap: Setting default EAP type for tunneled EAP session (17) eap_peap: Got tunneled request (17) eap_peap: EAP-Message = 0x0208000f0174657374757365723032 (17) eap_peap: Setting User-Name to testuser02 (17) eap_peap: Sending tunneled request to inner-tunnel (17) eap_peap: EAP-Message = 0x0208000f0174657374757365723032 (17) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (17) eap_peap: User-Name = "testuser02" (17) Virtual server inner-tunnel received request (17) EAP-Message = 0x0208000f0174657374757365723032 (17) FreeRADIUS-Proxied-To = 127.0.0.1 (17) User-Name = "testuser02" (17) WARNING: Outer and inner identities are the same. User privacy is compromised. (17) server inner-tunnel { (17) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (17) authorize { (17) policy filter_username { (17) if (&User-Name) { (17) if (&User-Name) -> TRUE (17) if (&User-Name) { (17) if (&User-Name =~ / /) { (17) if (&User-Name =~ / /) -> FALSE (17) if (&User-Name =~ /@[^@]*@/ ) { (17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (17) if (&User-Name =~ /\.\./ ) { (17) if (&User-Name =~ /\.\./ ) -> FALSE (17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (17) if (&User-Name =~ /\.$/) { (17) if (&User-Name =~ /\.$/) -> FALSE (17) if (&User-Name =~ /@\./) { (17) if (&User-Name =~ /@\./) -> FALSE (17) } # if (&User-Name) = notfound (17) } # policy filter_username = notfound (17) [chap] = noop (17) [mschap] = noop (17) suffix: Checking for suffix after "@" (17) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (17) suffix: No such realm "NULL" (17) [suffix] = noop (17) update control { (17) &Proxy-To-Realm := LOCAL (17) } # update control = noop (17) eap: Peer sent EAP Response (code 2) ID 8 length 15 (17) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (17) [eap] = ok (17) } # authorize = ok (17) Found Auth-Type = eap (17) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (17) authenticate { (17) eap: Peer sent packet with method EAP Identity (1) (17) eap: Calling submodule eap_mschapv2 to process data (17) eap_mschapv2: Issuing Challenge (17) eap: Sending EAP Request (code 1) ID 9 length 43 (17) eap: EAP session adding &reply:State = 0xb7e2c8f1b7ebd218 (17) [eap] = handled (17) } # authenticate = handled (17) } # server inner-tunnel (17) Virtual server sending reply (17) EAP-Message = 0x0109002b1a0109002610fab09371e70f5b13662849bb385164c7667265657261646975732d332e302e3133 (17) Message-Authenticator = 0x00000000000000000000000000000000 (17) State = 0xb7e2c8f1b7ebd218de4c6e0e31fba795 (17) eap_peap: Got tunneled reply code 11 (17) eap_peap: EAP-Message = 0x0109002b1a0109002610fab09371e70f5b13662849bb385164c7667265657261646975732d332e302e3133 (17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (17) eap_peap: State = 0xb7e2c8f1b7ebd218de4c6e0e31fba795 (17) eap_peap: Got tunneled reply RADIUS code 11 (17) eap_peap: EAP-Message = 0x0109002b1a0109002610fab09371e70f5b13662849bb385164c7667265657261646975732d332e302e3133 (17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (17) eap_peap: State = 0xb7e2c8f1b7ebd218de4c6e0e31fba795 (17) eap_peap: Got tunneled Access-Challenge (17) eap: Sending EAP Request (code 1) ID 9 length 74 (17) eap: EAP session adding &reply:State = 0xb172d43bb67bcde3 (17) [eap] = handled (17) } # authenticate = handled (17) Using Post-Auth-Type Challenge (17) # Executing group from file /etc/raddb/sites-enabled/default (17) Challenge { ... } # empty sub-section is ignored (17) Sent Access-Challenge Id 62 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (17) EAP-Message = 0x0109004a1900170303003f9596a328dd4626c016ea14513fa666cf0eec16bbe94d5fd79cb570ba11688ae51561a237eebf9d9f20f625ecd85933fcbf9a579d7f5d3894df8d721d53d1f9 (17) Message-Authenticator = 0x00000000000000000000000000000000 (17) State = 0xb172d43bb67bcde3cf1be57c2d2e9caa (17) Finished request Waking up in 4.8 seconds. (18) Received Access-Request Id 57 from 192.168.3.5:56875 to 192.168.3.33:1812 length 310 (18) User-Name = "testuser02" (18) NAS-IP-Address = 192.168.3.5 (18) NAS-Port = 0 (18) NAS-Identifier = "192.168.3.10" (18) NAS-Port-Type = Wireless-802.11 (18) Calling-Station-Id = "70bbe9363cbc" (18) Called-Station-Id = "aca31ec330ac" (18) Service-Type = Login-User (18) Framed-MTU = 1100 (18) EAP-Message = 0x0209006419001703030059000000000000000231d5e0f0af6e4da1b51b8ffaa60e253b8c86f3ec6d67b8125b9803994a6521d99df794c5f0dd826115a5f875ab1e3dd61c1d3efbfaef2e25967506f6f12533bd8dcfb1300c974192168422348eb06b210d (18) State = 0xb172d43bb67bcde3cf1be57c2d2e9caa (18) Aruba-Essid-Name = "radius" (18) Aruba-Location-Id = "Turmeric-01" (18) Aruba-AP-Group = "Turmeric Cloud" (18) Aruba-Device-Type = "Linux" (18) Message-Authenticator = 0x2bffc1ee38177ba7d30c2775d4d868df (18) session-state: No cached attributes (18) # Executing section authorize from file /etc/raddb/sites-enabled/default (18) authorize { (18) policy filter_username { (18) if (&User-Name) { (18) if (&User-Name) -> TRUE (18) if (&User-Name) { (18) if (&User-Name =~ / /) { (18) if (&User-Name =~ / /) -> FALSE (18) if (&User-Name =~ /@[^@]*@/ ) { (18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (18) if (&User-Name =~ /\.\./ ) { (18) if (&User-Name =~ /\.\./ ) -> FALSE (18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (18) if (&User-Name =~ /\.$/) { (18) if (&User-Name =~ /\.$/) -> FALSE (18) if (&User-Name =~ /@\./) { (18) if (&User-Name =~ /@\./) -> FALSE (18) } # if (&User-Name) = notfound (18) } # policy filter_username = notfound (18) [preprocess] = ok (18) [chap] = noop (18) [mschap] = noop (18) [digest] = noop (18) suffix: Checking for suffix after "@" (18) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (18) suffix: No such realm "NULL" (18) [suffix] = noop (18) eap: Peer sent EAP Response (code 2) ID 9 length 100 (18) eap: Continuing tunnel setup (18) [eap] = ok (18) } # authorize = ok (18) Found Auth-Type = eap (18) # Executing group from file /etc/raddb/sites-enabled/default (18) authenticate { (18) eap: Expiring EAP session with state 0xb7e2c8f1b7ebd218 (18) eap: Finished EAP session with state 0xb172d43bb67bcde3 (18) eap: Previous EAP request found for state 0xb172d43bb67bcde3, released from the list (18) eap: Peer sent packet with method EAP PEAP (25) (18) eap: Calling submodule eap_peap to process data (18) eap_peap: Continuing EAP-TLS (18) eap_peap: [eaptls verify] = ok (18) eap_peap: Done initial handshake (18) eap_peap: [eaptls process] = ok (18) eap_peap: Session established. Decoding tunneled attributes (18) eap_peap: PEAP state phase2 (18) eap_peap: EAP method MSCHAPv2 (26) (18) eap_peap: Got tunneled request (18) eap_peap: EAP-Message = 0x020900451a02090040316e01005c248f80616d897db1fb0cc6ce0000000000000000e3ac332c4625640150467691b1c282a689ea85a5d6c7b3ec0074657374757365723032 (18) eap_peap: Setting User-Name to testuser02 (18) eap_peap: Sending tunneled request to inner-tunnel (18) eap_peap: EAP-Message = 0x020900451a02090040316e01005c248f80616d897db1fb0cc6ce0000000000000000e3ac332c4625640150467691b1c282a689ea85a5d6c7b3ec0074657374757365723032 (18) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (18) eap_peap: User-Name = "testuser02" (18) eap_peap: State = 0xb7e2c8f1b7ebd218de4c6e0e31fba795 (18) Virtual server inner-tunnel received request (18) EAP-Message = 0x020900451a02090040316e01005c248f80616d897db1fb0cc6ce0000000000000000e3ac332c4625640150467691b1c282a689ea85a5d6c7b3ec0074657374757365723032 (18) FreeRADIUS-Proxied-To = 127.0.0.1 (18) User-Name = "testuser02" (18) State = 0xb7e2c8f1b7ebd218de4c6e0e31fba795 (18) WARNING: Outer and inner identities are the same. User privacy is compromised. (18) server inner-tunnel { (18) session-state: No cached attributes (18) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (18) authorize { (18) policy filter_username { (18) if (&User-Name) { (18) if (&User-Name) -> TRUE (18) if (&User-Name) { (18) if (&User-Name =~ / /) { (18) if (&User-Name =~ / /) -> FALSE (18) if (&User-Name =~ /@[^@]*@/ ) { (18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (18) if (&User-Name =~ /\.\./ ) { (18) if (&User-Name =~ /\.\./ ) -> FALSE (18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (18) if (&User-Name =~ /\.$/) { (18) if (&User-Name =~ /\.$/) -> FALSE (18) if (&User-Name =~ /@\./) { (18) if (&User-Name =~ /@\./) -> FALSE (18) } # if (&User-Name) = notfound (18) } # policy filter_username = notfound (18) [chap] = noop (18) [mschap] = noop (18) suffix: Checking for suffix after "@" (18) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (18) suffix: No such realm "NULL" (18) [suffix] = noop (18) update control { (18) &Proxy-To-Realm := LOCAL (18) } # update control = noop (18) eap: Peer sent EAP Response (code 2) ID 9 length 69 (18) eap: No EAP Start, assuming it's an on-going EAP conversation (18) [eap] = updated (18) [files] = noop (18) sql: EXPAND %{User-Name} (18) sql: --> testuser02 (18) sql: SQL-User-Name set to 'testuser02' rlm_sql (sql): Reserved connection (5) (18) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (18) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser02' ORDER BY id (18) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser02' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 2 , fields = 5 (18) sql: User found in radcheck table (18) sql: EXPAND SELECT group_name FROM radusergroup WHERE username='%{SQL-User-Name}' ORDER BY priority (18) sql: --> SELECT group_name FROM radusergroup WHERE username='testuser02' ORDER BY priority (18) sql: Executing select query: SELECT group_name FROM radusergroup WHERE username='testuser02' ORDER BY priority rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 (18) sql: User found in the group table (18) sql: EXPAND SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = '%{SQL-Group}' ORDER BY id (18) sql: --> SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = 'testgroup01' ORDER BY id (18) sql: Executing select query: SELECT id, group_name, attribute, value, op FROM radgroupcheck WHERE group_name = 'testgroup01' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (18) sql: Group "testgroup01": Conditional check items matched (18) sql: Group "testgroup01": Merging assignment check items (18) sql: EXPAND SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = '%{SQL-Group}' ORDER BY id (18) sql: --> SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = 'testgroup01' ORDER BY id (18) sql: Executing select query: SELECT id, group_name, attribute, value, op FROM radgroupreply WHERE group_name = 'testgroup01' ORDER BY id rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 0 , fields = 5 (18) sql: Group "testgroup01": Merging reply items rlm_sql (sql): Released connection (5) (18) [sql] = ok (18) [expiration] = noop (18) [logintime] = noop (18) [pap] = noop (18) } # authorize = updated (18) Found Auth-Type = eap (18) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (18) authenticate { (18) eap: Expiring EAP session with state 0xb7e2c8f1b7ebd218 (18) eap: Finished EAP session with state 0xb7e2c8f1b7ebd218 (18) eap: Previous EAP request found for state 0xb7e2c8f1b7ebd218, released from the list (18) eap: Peer sent packet with method EAP MSCHAPv2 (26) (18) eap: Calling submodule eap_mschapv2 to process data (18) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (18) eap_mschapv2: authenticate { (18) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (18) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (18) mschap: Creating challenge hash with username: testuser02 (18) mschap: Client is using MS-CHAPv2 (18) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (18) mschap: ERROR: MS-CHAP2-Response is incorrect (18) [mschap] = reject (18) } # authenticate = reject (18) eap: Sending EAP Failure (code 4) ID 9 length 4 (18) eap: Freeing handler (18) [eap] = reject (18) } # authenticate = reject (18) Failed to authenticate the user (18) Using Post-Auth-Type Reject (18) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (18) Post-Auth-Type REJECT { (18) sql: EXPAND .query (18) sql: --> .query (18) sql: Using query template 'query' rlm_sql (sql): Reserved connection (1) (18) sql: EXPAND %{User-Name} (18) sql: --> testuser02 (18) sql: SQL-User-Name set to 'testuser02' (18) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', NOW()) (18) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('testuser02', 'Chap-Password', 'Access-Reject', NOW()) (18) sql: EXPAND /var/log/radius/sqllog.sql (18) sql: --> /var/log/radius/sqllog.sql (18) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('testuser02', 'Chap-Password', 'Access-Reject', NOW()) rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 1 (18) sql: SQL query returned: success (18) sql: 1 record(s) updated rlm_sql (sql): Released connection (1) (18) [sql] = ok (18) attr_filter.access_reject: EXPAND %{User-Name} (18) attr_filter.access_reject: --> testuser02 (18) attr_filter.access_reject: Matched entry DEFAULT at line 11 (18) [attr_filter.access_reject] = updated (18) update outer.session-state { (18) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication' (18) } # update outer.session-state = noop (18) } # Post-Auth-Type REJECT = updated (18) } # server inner-tunnel (18) Virtual server sending reply (18) MS-CHAP-Error = "\tE=691 R=1 C=05ef2700c3964f0933eed3c0f5f21100 V=3 M=Authentication failed" (18) EAP-Message = 0x04090004 (18) Message-Authenticator = 0x00000000000000000000000000000000 (18) eap_peap: Got tunneled reply code 3 (18) eap_peap: MS-CHAP-Error = "\tE=691 R=1 C=05ef2700c3964f0933eed3c0f5f21100 V=3 M=Authentication failed" (18) eap_peap: EAP-Message = 0x04090004 (18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (18) eap_peap: Got tunneled reply RADIUS code 3 (18) eap_peap: MS-CHAP-Error = "\tE=691 R=1 C=05ef2700c3964f0933eed3c0f5f21100 V=3 M=Authentication failed" (18) eap_peap: EAP-Message = 0x04090004 (18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (18) eap_peap: Tunneled authentication was rejected (18) eap_peap: FAILURE (18) eap: Sending EAP Request (code 1) ID 10 length 46 (18) eap: EAP session adding &reply:State = 0xb172d43bb978cde3 (18) [eap] = handled (18) } # authenticate = handled (18) Using Post-Auth-Type Challenge (18) # Executing group from file /etc/raddb/sites-enabled/default (18) Challenge { ... } # empty sub-section is ignored (18) session-state: Saving cached attributes (18) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (18) Sent Access-Challenge Id 57 from 192.168.3.33:1812 to 192.168.3.5:56875 length 0 (18) EAP-Message = 0x010a002e190017030300239596a328dd4626c143e2021e8c7391708bcc4e88213c15060e3687fcd68f906e7b2e23 (18) Message-Authenticator = 0x00000000000000000000000000000000 (18) State = 0xb172d43bb978cde3cf1be57c2d2e9caa (18) Finished request Waking up in 4.8 seconds. (19) Received Access-Request Id 58 from 192.168.3.5:56875 to 192.168.3.33:1812 length 256 (19) User-Name = "testuser02" (19) NAS-IP-Address = 192.168.3.5 (19) NAS-Port = 0 (19) NAS-Identifier = "192.168.3.10" (19) NAS-Port-Type = Wireless-802.11 (19) Calling-Station-Id = "70bbe9363cbc" (19) Called-Station-Id = "aca31ec330ac" (19) Service-Type = Login-User (19) Framed-MTU = 1100 (19) EAP-Message = 0x020a002e19001703030023000000000000000322eaf117744fe167b4562fd131b695cc91970277b1e736affe103c (19) State = 0xb172d43bb978cde3cf1be57c2d2e9caa (19) Aruba-Essid-Name = "radius" (19) Aruba-Location-Id = "Turmeric-01" (19) Aruba-AP-Group = "Turmeric Cloud" (19) Aruba-Device-Type = "Linux" (19) Message-Authenticator = 0x2e1f215ba282ab30f4b2f02dc913594e (19) Restoring &session-state (19) &session-state:Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (19) # Executing section authorize from file /etc/raddb/sites-enabled/default (19) authorize { (19) policy filter_username { (19) if (&User-Name) { (19) if (&User-Name) -> TRUE (19) if (&User-Name) { (19) if (&User-Name =~ / /) { (19) if (&User-Name =~ / /) -> FALSE (19) if (&User-Name =~ /@[^@]*@/ ) { (19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (19) if (&User-Name =~ /\.\./ ) { (19) if (&User-Name =~ /\.\./ ) -> FALSE (19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (19) if (&User-Name =~ /\.$/) { (19) if (&User-Name =~ /\.$/) -> FALSE (19) if (&User-Name =~ /@\./) { (19) if (&User-Name =~ /@\./) -> FALSE (19) } # if (&User-Name) = notfound (19) } # policy filter_username = notfound (19) [preprocess] = ok (19) [chap] = noop (19) [mschap] = noop (19) [digest] = noop (19) suffix: Checking for suffix after "@" (19) suffix: No '@' in User-Name = "testuser02", looking up realm NULL (19) suffix: No such realm "NULL" (19) [suffix] = noop (19) eap: Peer sent EAP Response (code 2) ID 10 length 46 (19) eap: Continuing tunnel setup (19) [eap] = ok (19) } # authorize = ok (19) Found Auth-Type = eap (19) # Executing group from file /etc/raddb/sites-enabled/default (19) authenticate { (19) eap: Expiring EAP session with state 0xb172d43bb978cde3 (19) eap: Finished EAP session with state 0xb172d43bb978cde3 (19) eap: Previous EAP request found for state 0xb172d43bb978cde3, released from the list (19) eap: Peer sent packet with method EAP PEAP (25) (19) eap: Calling submodule eap_peap to process data (19) eap_peap: Continuing EAP-TLS (19) eap_peap: [eaptls verify] = ok (19) eap_peap: Done initial handshake (19) eap_peap: [eaptls process] = ok (19) eap_peap: Session established. Decoding tunneled attributes (19) eap_peap: PEAP state send tlv failure (19) eap_peap: Received EAP-TLV response (19) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (19) eap_peap: This means you need to read the PREVIOUS messages in the debug output (19) eap_peap: to find out the reason why the user was rejected (19) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (19) eap_peap: what went wrong, and how to fix the problem (19) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (19) eap: Sending EAP Failure (code 4) ID 10 length 4 (19) eap: Failed in EAP select (19) [eap] = invalid (19) } # authenticate = invalid (19) Failed to authenticate the user (19) Using Post-Auth-Type Reject (19) # Executing group from file /etc/raddb/sites-enabled/default (19) Post-Auth-Type REJECT { (19) sql: EXPAND .query (19) sql: --> .query (19) sql: Using query template 'query' rlm_sql (sql): Reserved connection (6) (19) sql: EXPAND %{User-Name} (19) sql: --> testuser02 (19) sql: SQL-User-Name set to 'testuser02' (19) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('%{User-Name}', '%{%{User-Password}:-Chap-Password}', '%{reply:Packet-Type}', NOW()) (19) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('testuser02', 'Chap-Password', 'Access-Reject', NOW()) (19) sql: EXPAND /var/log/radius/sqllog.sql (19) sql: --> /var/log/radius/sqllog.sql (19) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES('testuser02', 'Chap-Password', 'Access-Reject', NOW()) rlm_sql_postgresql: Status: PGRES_COMMAND_OK rlm_sql_postgresql: query affected rows = 1 (19) sql: SQL query returned: success (19) sql: 1 record(s) updated rlm_sql (sql): Released connection (6) (19) [sql] = ok (19) attr_filter.access_reject: EXPAND %{User-Name} (19) attr_filter.access_reject: --> testuser02 (19) attr_filter.access_reject: Matched entry DEFAULT at line 11 (19) [attr_filter.access_reject] = updated (19) [eap] = noop (19) policy remove_reply_message_if_eap { (19) if (&reply:EAP-Message && &reply:Reply-Message) { (19) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (19) else { (19) [noop] = noop (19) } # else = noop (19) } # policy remove_reply_message_if_eap = noop (19) } # Post-Auth-Type REJECT = updated (19) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (19) Sending delayed response (19) Sent Access-Reject Id 58 from 192.168.3.33:1812 to 192.168.3.5:56875 length 44 (19) EAP-Message = 0x040a0004 (19) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (10) Cleaning up request packet ID 47 with timestamp +29 (11) Cleaning up request packet ID 50 with timestamp +29 (12) Cleaning up request packet ID 46 with timestamp +29 (13) Cleaning up request packet ID 53 with timestamp +29 (14) Cleaning up request packet ID 54 with timestamp +29 (15) Cleaning up request packet ID 55 with timestamp +29 (16) Cleaning up request packet ID 56 with timestamp +29 (17) Cleaning up request packet ID 62 with timestamp +29 (18) Cleaning up request packet ID 57 with timestamp +29 (19) Cleaning up request packet ID 58 with timestamp +29 Ready to process requests - Sudheer