Hi, I'm giving dynamic_home_servers a try. I didn't get very far though: - started with the default shipped config - enabled sites-enabled/control-socket - enabled dynamic=true and the default directory - added one single entry in the directory, with filename "testrealm.lu": home_server testrealm.lu { # ipv6addr = "2001:db8::6" ipaddr = "192.168.20.5" proto = udp secret = "radsec" } - started FreeRADIUS, looked at the following error: including configuration file /home/stefan/RESTENA/freeradius-build/etc/raddb/home_servers/testrealm.lu home_server testrealm.lu { ipaddr = 192.168.20.5 port = 0 proto = "udp" secret = <<< secret >>> response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } Failed reading home_server from /home/stefan/RESTENA/freeradius-build/etc/raddb/home_servers/testrealm.lu - Dynamic home_server 'testrealm.lu' cannot have 'server' or 'auth+acct' So the configuration is parsed correctly, but then... I didn't specify "auth+acct" (and if I do, same error); nor do I know what is meant with "server" (and switching between ipaddr and ipv6addr didn't change anything)? Adding a port = 1812 doesn't change anything either. When I read in the docs that these should be "normal" home_server definitions, I wonder... they are seemingly not quite that normal? Greetings, Stefan Winter -- This email may contain information for limited distribution only, please treat accordingly. Fondation Restena, Stefan WINTER Chief Technology Officer 2, avenue de l'Université L-4365 Esch-sur-Alzette