Hi I think you have to try in this way (for example): TEST4 Cisco-AVPair == "ssid=SSID1" , Auth-Type := EAP Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 2, Tunnel-Type = VLAN DEFAULT Auth-Type := Reject if uou want a password: TEST4 Cisco-AVPair == "ssid=SSID1" ,User-Password="XXXX", Auth-Type := EAP Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 2, Tunnel-Type = VLAN DEFAULT Auth-Type := Reject Regards sergio Antonio Matera wrote:
My goal is to have authenticate user only if the SSID is right! You know how can I do it?
Thanks Antonio
on 05/04/2006 17.33 Sergio Sagliocco said the following:
Hello your goal is authenticate users only if the SSID is rght or to have different EAP Authentication method based on SSID?
regards sergio
Antonio Matera wrote:
Hallo, thanks for the answer.
With your solution my radius don't authenticate my users.... Is my configuration correct or I need other change in my radius files?
Thanks bye
on 05/04/2006 15.27 Sergio Sagliocco said the following:
Hi I think you have to use == instead of := For example:
DEFAULT Cisco-AVPair == "ssid=testLEAP" , EAP-Type := Cisco-LEAP
Regards
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
------------------------------------------------------------------------
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- Sergio SAGLIOCCO SecureLAB - http://www.securelab.it CSP s.c. a r.l. - http://www.csp.it ______________________________________________ Villa Gualino Viale Settimo Severo, 63 - 10133 Torino [IT] tel. +39 011 481 5140 - Mobile +39 348 6024078 fax +39 011 481 5001 ______________________________________________