Hi, I have following setup where windows host is connected to Cisco 2960 which is connected to Microsoft AD via RADIUS proxy Windows host (XP SP3) -> Cisco 2960 -> freeRADIUS proxy (2.1.10) -> Microsoft AD (2003) In the above setup user authentication goes fine. I am using PEAP v1 authentication. I am struggling hard to make host authentication successful. When the machine boots I see radius Access-Request with User-Name = "host/ radhost1.testad1.com" which qualifies to IPASS type realm and searches for realm as "host" and things do not work. Please point me to links/docs or give me pointer where/how to start. rad_recv: Access-Request packet from host 192.168.6.200 port 1645, id=141, length=165 User-Name = "host/radhost1.testad1.com" Service-Type = Framed-User Framed-MTU = 1500 Called-Station-Id = "00-21-D7-00-51-89" Calling-Station-Id = "00-13-20-38-33-27" EAP-Message = 0x021a001e01686f73742f726164686f7374312e746573746164312e636f6d Message-Authenticator = 0x2deded3294b409a59441b3e5777a9a87 NAS-Port-Type = Ethernet NAS-Port = 50009 NAS-IP-Address = 192.168.6.200 Wed Oct 20 07:27:48 2010 : Info: # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default Wed Oct 20 07:27:48 2010 : Info: +- entering group authorize {...} Wed Oct 20 07:27:48 2010 : Info: ++[preprocess] returns ok Wed Oct 20 07:27:48 2010 : Info: ++[chap] returns noop Wed Oct 20 07:27:48 2010 : Info: ++[mschap] returns noop Wed Oct 20 07:27:48 2010 : Info: [IPASS] Looking up realm "host" for User-Name = "host/radhost1.testad1.com" Wed Oct 20 07:27:48 2010 : Info: [IPASS] Found realm "DEFAULT" Wed Oct 20 07:27:48 2010 : Info: [IPASS] Adding Stripped-User-Name = " radhost1.testad1.com" Wed Oct 20 07:27:48 2010 : Info: [IPASS] Adding Realm = "DEFAULT" Wed Oct 20 07:27:48 2010 : Info: [IPASS] Authentication realm is LOCAL. Wed Oct 20 07:27:48 2010 : Info: ++[IPASS] returns ok Wed Oct 20 07:27:48 2010 : Info: [suffix] Request already proxied. Ignoring. Wed Oct 20 07:27:48 2010 : Info: ++[suffix] returns ok Wed Oct 20 07:27:48 2010 : Info: [ntdomain] Request already proxied. Ignoring. Wed Oct 20 07:27:48 2010 : Info: ++[ntdomain] returns ok Wed Oct 20 07:27:48 2010 : Info: [realmpercent] Request already proxied. Ignoring. Wed Oct 20 07:27:48 2010 : Info: ++[realmpercent] returns ok Wed Oct 20 07:27:48 2010 : Info: [eap] EAP packet type response id 26 length 30 Wed Oct 20 07:27:48 2010 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Wed Oct 20 07:27:48 2010 : Info: ++[eap] returns updated Wed Oct 20 07:27:48 2010 : Info: ++[unix] returns notfound Wed Oct 20 07:27:48 2010 : Info: ++[files] returns noop Wed Oct 20 07:27:48 2010 : Info: ++[expiration] returns noop Wed Oct 20 07:27:48 2010 : Info: ++[logintime] returns noop Wed Oct 20 07:27:48 2010 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Wed Oct 20 07:27:48 2010 : Info: ++[pap] returns noop Wed Oct 20 07:27:48 2010 : Info: Found Auth-Type = EAP Wed Oct 20 07:27:48 2010 : Info: # Executing group from file /usr/local/etc/raddb/sites-enabled/default Wed Oct 20 07:27:48 2010 : Info: +- entering group authenticate {...} Wed Oct 20 07:27:48 2010 : Info: [eap] EAP Identity Wed Oct 20 07:27:48 2010 : Info: [eap] processing type md5 Wed Oct 20 07:27:48 2010 : Debug: rlm_eap_md5: Issuing Challenge Wed Oct 20 07:27:48 2010 : Info: ++[eap] returns handled Sending Access-Challenge of id 141 to 192.168.6.200 port 1645 EAP-Message = 0x011b001604100675c546c11b2ad0f1a7341b757af909 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6d4e1d1a6d5519217cdc7f95e535c25b Wed Oct 20 07:27:48 2010 : Info: Finished request 48. Wed Oct 20 07:27:48 2010 : Debug: Going to the next request Wed Oct 20 07:27:48 2010 : Debug: Waking up in 4.9 seconds. Thanks & Regards -- Chidanand Gangur Pune.