Helo there, I'm relative new to freeradius, and i'm trying to configure a PPTP VPN on pfSense, authenticating in a FreeRADIUS with LDAP module. But, I'm getting the following error : Found Auth-Type = LDAP WARNING: Please update your configuration, and remove 'Auth-Type = Local' WARNING: Use the PAP or CHAP modules instead. No User-Password or CHAP-Password attribute in the request. Cannot perform authentication. Failed to authenticate the user. The authorize process works fine, but the authentication not. I can't find "Auth-Type = Local" as it says. This is my access request : rad_recv: Access-Request packet from host 192.168.7.1 port 2067, id=132, length=182 NAS-Identifier = "yoda" NAS-Port = 0 NAS-Port-Type = Virtual Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "189.102.177.232" User-Name = "fmathias" MS-CHAP-Challenge = 0xbb1e68338ed8f5047a5224fc502acaf9 MS-CHAP2-Response = 0x0100e017671426d787073d90dcb6a30ab3550000000000000000a5d5fa96e3770592a1df0039fcc812ea53a3684636f16cb3 I've tried many of google searches troubleshooting MS-CHAP problems and most of them is saying me to get a Cleartext-Password entry on my database. But I can't consider this an option, because the security of my accounts in LDAP would be extremely compromised. Can you help me? Thanks in advance, Fábio Rampazzo Mathias