my last coonfiguration of these files is: radiusd.conf proxy_request = yes proxy.conf realm gie.local { type = radius authhost = LOCAL accthost = LOCAL } realm DEFAULT { type = radius authhost = araignee.gie.local:1812 accthost = araignee.gie.local:1813 secret = parfait nostrip } Clients.conf client 192.168.0.2 { secret = parfait shortname = araignee.gie.local } when i do configuration in all flies my freeradius reject my packets! this is the show of radiusd -X! Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1812 main: allow_core_dumps = no main: log_stripped_names = yes main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = yes main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "nobody" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 0 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Listening on proxy *:1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.3.1:1812, id=19, length=130 NAS-IP-Address = 192.168.3.1 NAS-Port = 50001 NAS-Port-Type = Ethernet User-Name = "picasso@gie.local" Calling-Station-Id = "00-A0-C9-DE-7A-FE" Service-Type = Framed-User Framed-MTU = 1000 EAP-Message = 0x02020016017069636173736f406769652e6c6f63616c Message-Authenticator = 0x5aa9378c210f3cc9896ff7a4742bce77 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 rlm_realm: Looking up realm "gie.local" for User-Name = "picasso@gie.local" rlm_realm: Found realm "gie.local" rlm_realm: Proxying request from user picasso to realm gie.local rlm_realm: Adding Realm = "gie.local" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 2 length 22 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 19 to 192.168.3.1 port 1812 EAP-Message = 0x01030016041014292e9e4d0f780980b96f3ad2459504 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x020f058ccb95cbc717c1bb0f624b681b Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.3.1:1812, id=20, length=165 NAS-IP-Address = 192.168.3.1 NAS-Port = 50001 NAS-Port-Type = Ethernet User-Name = "picasso@gie.local" Calling-Station-Id = "00-A0-C9-DE-7A-FE" Service-Type = Framed-User Framed-MTU = 1000 State = 0x020f058ccb95cbc717c1bb0f624b681b EAP-Message = 0x020300270410e10ab8e5381c81c7806d8dbe102936fa7069636173736f406769652e6c6f63616c Message-Authenticator = 0xd4268d3dbb7397a0ff40d4c74b040f9d Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 rlm_realm: Looking up realm "gie.local" for User-Name = "picasso@gie.local" rlm_realm: Found realm "gie.local" rlm_realm: Proxying request from user picasso to realm gie.local rlm_realm: Adding Realm = "gie.local" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 3 length 39 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/md5 rlm_eap: processing type md5 rlm_eap_md5: User-Password is required for EAP-MD5 authentication rlm_eap: Handler failed in EAP/md5 rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 1 modcall: leaving group authenticate (returns invalid) for request 1 auth: Failed to validate the user. Login incorrect: [picasso@gie.local/<no User-Password attribute>] (from client Switch port 50001 cli 00-A0-C9-DE-7A-FE) Delaying request 1 for 1 seconds Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.3.1:1812, id=20, length=165 Sending Access-Reject of id 20 to 192.168.3.1 port 1812 EAP-Message = 0x04030004 Message-Authenticator = 0x00000000000000000000000000000000 --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 19 with timestamp 46288d79 Cleaning up request 1 ID 20 with timestamp 46288d79 Nothing to do. Sleeping until we see a request. _________________________________________________________________ MSN Hotmail : créez votre adresse e-mail gratuite & à vie ! http://www.msn.fr/newhotmail/Default.asp?Ath=f