Help with EAP-TTLS and PAP

Hey,I know this gets asked a lot and I spent quite a while searching for my use case, but I couldn't find anything that helped me.First a little bit about my setup:We have a Sun DS with salted SHA1 passwords, freeradius 3.0.10, Aruba IAP-225 access points and Windows and OS X clients.My goal is having the users log on to the WPA2 Enterprise wifi with their LDAP credentials and no client configuration whatsoever. This means I don't want to install network profiles on the Macs and no EAP-GTC plugins on the Windows machines.From what I've read, this should be possible with EAP-TTLS and inner PAP, as PAP can work with salted SHA1 passwords. However, in all the setup guides I looked at, it said the eap module should use default_eap_type = ttls in the outer section and default_eap_type = md5 in the ttls section and then PAP should be used. I verified PAP is working and if I use EAP-TTLS with inner EAP-GTC my Macs can logon just fine.So my question is now: what am I doing wrong? Is inner EAP-MD5 correct? Is what I'm trying to do even possible?Any help is greatly appreciated!Below the debug output of EAP-TTLS with inner EAP-MD5:Copyright (C) 1999-2015 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/share/freeradius/dictionaryincluding dictionary file /usr/share/freeradius/dictionary.dhcpincluding dictionary file /usr/share/freeradius/dictionary.vqpincluding dictionary file /etc/freeradius/dictionaryincluding configuration file /etc/freeradius/radiusd.confincluding configuration file /etc/freeradius/proxy.confincluding configuration file /etc/freeradius/clients.confincluding files in directory /etc/freeradius/mods-enabled/including configuration file /etc/freeradius/mods-enabled/expirationincluding configuration file /etc/freeradius/mods-enabled/dynamic_clientsincluding configuration file /etc/freeradius/mods-enabled/digestincluding configuration file /etc/freeradius/mods-enabled/attr_filterincluding configuration file /etc/freeradius/mods-enabled/utf8including configuration file /etc/freeradius/mods-enabled/preprocessincluding configuration file /etc/freeradius/mods-enabled/linelogincluding configuration file /etc/freeradius/mods-enabled/alwaysincluding configuration file /etc/freeradius/mods-enabled/eapincluding configuration file /etc/freeradius/mods-enabled/mschapincluding configuration file /etc/freeradius/mods-enabled/unpackincluding configuration file /etc/freeradius/mods-enabled/ntlm_authincluding configuration file /etc/freeradius/mods-enabled/radutmpincluding configuration file /etc/freeradius/mods-enabled/detail.logincluding configuration file /etc/freeradius/mods-enabled/sohincluding configuration file /etc/freeradius/mods-enabled/detailincluding configuration file /etc/freeradius/mods-enabled/unixincluding configuration file /etc/freeradius/mods-enabled/papincluding configuration file /etc/freeradius/mods-enabled/chapincluding configuration file /etc/freeradius/mods-enabled/logintimeincluding configuration file /etc/freeradius/mods-enabled/realmincluding configuration file /etc/freeradius/mods-enabled/sradutmpincluding configuration file /etc/freeradius/mods-enabled/filesincluding configuration file /etc/freeradius/mods-enabled/ldapincluding configuration file /etc/freeradius/mods-enabled/echoincluding configuration file /etc/freeradius/mods-enabled/cache_eapincluding configuration file /etc/freeradius/mods-enabled/exprincluding configuration file /etc/freeradius/mods-enabled/execincluding configuration file /etc/freeradius/mods-enabled/replicateincluding configuration file /etc/freeradius/mods-enabled/passwdincluding files in directory /etc/freeradius/policy.d/including configuration file /etc/freeradius/policy.d/abfab-trincluding configuration file /etc/freeradius/policy.d/eapincluding configuration file /etc/freeradius/policy.d/operator-nameincluding configuration file /etc/freeradius/policy.d/controlincluding configuration file /etc/freeradius/policy.d/canonicalizationincluding configuration file /etc/freeradius/policy.d/filterincluding configuration file /etc/freeradius/policy.d/debugincluding configuration file /etc/freeradius/policy.d/cuiincluding configuration file /etc/freeradius/policy.d/dhcpincluding configuration file /etc/freeradius/policy.d/accountingincluding files in directory /etc/freeradius/sites-enabled/including configuration file /etc/freeradius/sites-enabled/inner-tunnelincluding configuration file /etc/freeradius/sites-enabled/defaultmain { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius"}main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes }}radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { }radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client <ip> { require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } }No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client <ip>. Please fix your configurationSupport for old-style clients will be removed in a future releaseDebugger not attached # Creating Auth-Type = digestradiusd: #### Instantiating modules #### # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" }Creating attribute Unix-Group # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "ldaps://<url>" port = 636 identity = "uid=xxx,ou=xxx,dc=xxx,dc=xxx" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "isMemberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=xxx,dc=xxx" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no require_cert = "never" } }Creating attribute LDAP-Group # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } instantiate { } modules { # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filterreading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocessreading pairlist file /etc/freeradius/mods-config/preprocess/huntgroupsreading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschaprlm_mschap (mschap): using internal authentication # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.logrlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "files" from file /etc/freeradius/mods-enabled/filesreading pairlist file /etc/freeradius/mods-config/files/authorizereading pairlist file /etc/freeradius/mods-config/files/accountingreading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldaprlm_ldap: libldap vendor: OpenLDAP, version: 20431 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." }rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no }rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots usedrlm_ldap (ldap): Connecting to ldaps://<url>:636rlm_ldap (ldap): Waiting for bind result...rlm_ldap (ldap): Bind successfulrlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots usedrlm_ldap (ldap): Connecting to ldaps://<url>:636rlm_ldap (ldap): Waiting for bind result...rlm_ldap (ldap): Bind successfulrlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots usedrlm_ldap (ldap): Connecting to ldaps://<url>:636rlm_ldap (ldap): Waiting for bind result...rlm_ldap (ldap): Bind successfulrlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots usedrlm_ldap (ldap): Connecting to ldaps://<url>:636rlm_ldap (ldap): Waiting for bind result...rlm_ldap (ldap): Bind successfulrlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots usedrlm_ldap (ldap): Connecting to ldaps://<url>:636rlm_ldap (ldap): Waiting for bind result...rlm_ldap (ldap): Bind successful # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eaprlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwdrlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no } # modulesradiusd: #### Loading Virtual Servers ####server { # from file /etc/freeradius/radiusd.conf} # serverserver inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...}Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...}} # server inner-tunnelserver default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...}} # server defaultradiusd: #### Opening IP addresses and Ports ####listen { type = "auth" ipaddr = 127.0.0.1 port = 18120}listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnelListening on auth address * port 1812 bound to server defaultListening on acct address * port 1813 bound to server defaultListening on auth address :: port 1812 bound to server defaultListening on acct address :: port 1813 bound to server defaultListening on proxy address * port 53683Listening on proxy address :: port 41662Ready to process requests(0) Received Access-Request Id 67 from <ip>:59898 to <ip>:1812 length 201(0) User-Name = "hans.hering"(0) NAS-IP-Address = <ip>(0) NAS-Port = 0(0) NAS-Identifier = "<ip>"(0) NAS-Port-Type = Wireless-802.11(0) Calling-Station-Id = "4400100e904c"(0) Called-Station-Id = "186472cd167a"(0) Service-Type = Login-User(0) Framed-MTU = 1100(0) EAP-Message = 0x020100100168616e732e686572696e67(0) Aruba-Essid-Name = "<ssid>"(0) Aruba-Location-Id = "<apname>"(0) Aruba-AP-Group = "<apname>"(0) Message-Authenticator = 0x4cb828b841364e2b93bf7cd49d37cd93(0) # Executing section authorize from file /etc/freeradius/sites-enabled/default(0) authorize {(0) policy filter_username {(0) if (!&User-Name) {(0) if (!&User-Name) -> FALSE(0) if (&User-Name =~ / /) {(0) if (&User-Name =~ / /) -> FALSE(0) if (&User-Name =~ /@.*@/ ) {(0) if (&User-Name =~ /@.*@/ ) -> FALSE(0) if (&User-Name =~ /\.\./ ) {(0) if (&User-Name =~ /\.\./ ) -> FALSE(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(0) if (&User-Name =~ /\.$/) {(0) if (&User-Name =~ /\.$/) -> FALSE(0) if (&User-Name =~ /@\./) {(0) if (&User-Name =~ /@\./) -> FALSE(0) } # policy filter_username = notfound(0) [preprocess] = ok(0) [chap] = noop(0) [mschap] = noop(0) [digest] = noop(0) suffix: Checking for suffix after "@"(0) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL(0) suffix: No such realm "NULL"(0) [suffix] = noop(0) eap: Peer sent EAP Response (code 2) ID 1 length 16(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize(0) [eap] = ok(0) } # authorize = ok(0) Found Auth-Type = EAP(0) # Executing group from file /etc/freeradius/sites-enabled/default(0) authenticate {(0) eap: Peer sent packet with method EAP Identity (1)(0) eap: Calling submodule eap_ttls to process data(0) eap_ttls: Initiating new EAP-TLS session(0) eap_ttls: Flushing SSL sessions (of #0)(0) eap_ttls: [eaptls start] = request(0) eap: Sending EAP Request (code 1) ID 2 length 6(0) eap: EAP session adding &reply:State = 0x8aa7dbf48aa5ce2f(0) [eap] = handled(0) } # authenticate = handled(0) Using Post-Auth-Type Challenge(0) Post-Auth-Type sub-section not found. Ignoring.(0) # Executing group from file /etc/freeradius/sites-enabled/default(0) Sent Access-Challenge Id 67 from <ip>:1812 to <ip>:59898 length 0(0) EAP-Message = 0x010200061520(0) Message-Authenticator = 0x00000000000000000000000000000000(0) State = 0x8aa7dbf48aa5ce2f8993e0490c51278d(0) Finished requestWaking up in 4.9 seconds.(1) Received Access-Request Id 68 from <ip>:59898 to <ip>:1812 length 346(1) User-Name = "hans.hering"(1) NAS-IP-Address = <ip>(1) NAS-Port = 0(1) NAS-Identifier = "<ip>"(1) NAS-Port-Type = Wireless-802.11(1) Calling-Station-Id = "4400100e904c"(1) Called-Station-Id = "186472cd167a"(1) Service-Type = Login-User(1) Framed-MTU = 1100(1) EAP-Message = 0x0202008f15800000008516030100800100007c03015652d246ab03a55f379e0aba7bb683d2d8dbcc4d28270098815788bf8fbde73b00003400ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000ac007c011000500040100001f000a0008000600(1) State = 0x8aa7dbf48aa5ce2f8993e0490c51278d(1) Aruba-Essid-Name = "<ssid>"(1) Aruba-Location-Id = "<apname>"(1) Aruba-AP-Group = "<apname>"(1) Message-Authenticator = 0xa5b6bb20d994d289ff9bb012b9f6de16(1) session-state: No cached attributes(1) # Executing section authorize from file /etc/freeradius/sites-enabled/default(1) authorize {(1) policy filter_username {(1) if (!&User-Name) {(1) if (!&User-Name) -> FALSE(1) if (&User-Name =~ / /) {(1) if (&User-Name =~ / /) -> FALSE(1) if (&User-Name =~ /@.*@/ ) {(1) if (&User-Name =~ /@.*@/ ) -> FALSE(1) if (&User-Name =~ /\.\./ ) {(1) if (&User-Name =~ /\.\./ ) -> FALSE(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(1) if (&User-Name =~ /\.$/) {(1) if (&User-Name =~ /\.$/) -> FALSE(1) if (&User-Name =~ /@\./) {(1) if (&User-Name =~ /@\./) -> FALSE(1) } # policy filter_username = notfound(1) [preprocess] = ok(1) [chap] = noop(1) [mschap] = noop(1) [digest] = noop(1) suffix: Checking for suffix after "@"(1) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL(1) suffix: No such realm "NULL"(1) [suffix] = noop(1) eap: Peer sent EAP Response (code 2) ID 2 length 143(1) eap: Continuing tunnel setup(1) [eap] = ok(1) } # authorize = ok(1) Found Auth-Type = EAP(1) # Executing group from file /etc/freeradius/sites-enabled/default(1) authenticate {(1) eap: Expiring EAP session with state 0x8aa7dbf48aa5ce2f(1) eap: Finished EAP session with state 0x8aa7dbf48aa5ce2f(1) eap: Previous EAP request found for state 0x8aa7dbf48aa5ce2f, released from the list(1) eap: Peer sent packet with method EAP TTLS (21)(1) eap: Calling submodule eap_ttls to process data(1) eap_ttls: Authenticate(1) eap_ttls: Continuing EAP-TLS(1) eap_ttls: Peer indicated complete TLS record size will be 133 bytes(1) eap_ttls: Got complete TLS record (133 bytes)(1) eap_ttls: [eaptls verify] = length included(1) eap_ttls: (other): before/accept initialization(1) eap_ttls: TLS_accept: before/accept initialization(1) eap_ttls: <<< TLS 1.0 Handshake [length 0080], ClientHello (1) eap_ttls: TLS_accept: SSLv3 read client hello A(1) eap_ttls: >>> TLS 1.0 Handshake [length 0059], ServerHello (1) eap_ttls: TLS_accept: SSLv3 write server hello A(1) eap_ttls: >>> TLS 1.0 Handshake [length 08d3], Certificate (1) eap_ttls: TLS_accept: SSLv3 write certificate A(1) eap_ttls: >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange (1) eap_ttls: TLS_accept: SSLv3 write key exchange A(1) eap_ttls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_ttls: TLS_accept: SSLv3 write server done A(1) eap_ttls: TLS_accept: SSLv3 flush data(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A(1) eap_ttls: In SSL Handshake Phase(1) eap_ttls: In SSL Accept mode(1) eap_ttls: [eaptls process] = handled(1) eap: Sending EAP Request (code 1) ID 3 length 1004(1) eap: EAP session adding &reply:State = 0x8aa7dbf48ba4ce2f(1) [eap] = handled(1) } # authenticate = handled(1) Using Post-Auth-Type Challenge(1) Post-Auth-Type sub-section not found. Ignoring.(1) # Executing group from file /etc/freeradius/sites-enabled/default(1) Sent Access-Challenge Id 68 from <ip>:1812 to <ip>:59898 length 0(1) EAP-Message = 0x010303ec15c000000a8f16030100590200005503011f5637fc9907abb382f150b602d77e2cac29c21821752b2155fc5cb32e35fbdb20fb97b440265d98e05f08c2cb560622317f8389869d8117036e6e371dcfbf81d5c01400000dff01000100000b00040300010216030108d30b0008cf0008cc0003de(1) Message-Authenticator = 0x00000000000000000000000000000000(1) State = 0x8aa7dbf48ba4ce2f8993e0490c51278d(1) Finished requestWaking up in 4.9 seconds.(2) Received Access-Request Id 69 from <ip>:59898 to <ip>:1812 length 209(2) User-Name = "hans.hering"(2) NAS-IP-Address = <ip>(2) NAS-Port = 0(2) NAS-Identifier = "<ip>"(2) NAS-Port-Type = Wireless-802.11(2) Calling-Station-Id = "4400100e904c"(2) Called-Station-Id = "186472cd167a"(2) Service-Type = Login-User(2) Framed-MTU = 1100(2) EAP-Message = 0x020300061500(2) State = 0x8aa7dbf48ba4ce2f8993e0490c51278d(2) Aruba-Essid-Name = "<ssid>"(2) Aruba-Location-Id = "<apname>"(2) Aruba-AP-Group = "<apname>"(2) Message-Authenticator = 0x4ae0edce92e6af687df75c1ec8123562(2) session-state: No cached attributes(2) # Executing section authorize from file /etc/freeradius/sites-enabled/default(2) authorize {(2) policy filter_username {(2) if (!&User-Name) {(2) if (!&User-Name) -> FALSE(2) if (&User-Name =~ / /) {(2) if (&User-Name =~ / /) -> FALSE(2) if (&User-Name =~ /@.*@/ ) {(2) if (&User-Name =~ /@.*@/ ) -> FALSE(2) if (&User-Name =~ /\.\./ ) {(2) if (&User-Name =~ /\.\./ ) -> FALSE(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(2) if (&User-Name =~ /\.$/) {(2) if (&User-Name =~ /\.$/) -> FALSE(2) if (&User-Name =~ /@\./) {(2) if (&User-Name =~ /@\./) -> FALSE(2) } # policy filter_username = notfound(2) [preprocess] = ok(2) [chap] = noop(2) [mschap] = noop(2) [digest] = noop(2) suffix: Checking for suffix after "@"(2) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL(2) suffix: No such realm "NULL"(2) [suffix] = noop(2) eap: Peer sent EAP Response (code 2) ID 3 length 6(2) eap: Continuing tunnel setup(2) [eap] = ok(2) } # authorize = ok(2) Found Auth-Type = EAP(2) # Executing group from file /etc/freeradius/sites-enabled/default(2) authenticate {(2) eap: Expiring EAP session with state 0x8aa7dbf48ba4ce2f(2) eap: Finished EAP session with state 0x8aa7dbf48ba4ce2f(2) eap: Previous EAP request found for state 0x8aa7dbf48ba4ce2f, released from the list(2) eap: Peer sent packet with method EAP TTLS (21)(2) eap: Calling submodule eap_ttls to process data(2) eap_ttls: Authenticate(2) eap_ttls: Continuing EAP-TLS(2) eap_ttls: Peer ACKed our handshake fragment(2) eap_ttls: [eaptls verify] = request(2) eap_ttls: [eaptls process] = handled(2) eap: Sending EAP Request (code 1) ID 4 length 1004(2) eap: EAP session adding &reply:State = 0x8aa7dbf488a3ce2f(2) [eap] = handled(2) } # authenticate = handled(2) Using Post-Auth-Type Challenge(2) Post-Auth-Type sub-section not found. Ignoring.(2) # Executing group from file /etc/freeradius/sites-enabled/default(2) Sent Access-Challenge Id 69 from <ip>:1812 to <ip>:59898 length 0(2) EAP-Message = 0x010403ec15c000000a8fdd874ace35d935909eb41f076af54637807355b0c44328651be631d0fac4d2c6e81f9c4b8c711b5bb5dc1da68ec9f28dd8ebb18ee0bb6f63cff5d2b1c22fe1408af1ce00ae298e0c0151ac505915f8aaec5535d093ec63ad9ddc05e9ae8b8ba4442133a51318f8c3b90004e830(2) Message-Authenticator = 0x00000000000000000000000000000000(2) State = 0x8aa7dbf488a3ce2f8993e0490c51278d(2) Finished requestWaking up in 4.9 seconds.(3) Received Access-Request Id 70 from <ip>:59898 to <ip>:1812 length 209(3) User-Name = "hans.hering"(3) NAS-IP-Address = <ip>(3) NAS-Port = 0(3) NAS-Identifier = "<ip>"(3) NAS-Port-Type = Wireless-802.11(3) Calling-Station-Id = "4400100e904c"(3) Called-Station-Id = "186472cd167a"(3) Service-Type = Login-User(3) Framed-MTU = 1100(3) EAP-Message = 0x020400061500(3) State = 0x8aa7dbf488a3ce2f8993e0490c51278d(3) Aruba-Essid-Name = "<ssid>"(3) Aruba-Location-Id = "<apname>"(3) Aruba-AP-Group = "<apname>"(3) Message-Authenticator = 0xac0e164f6b96849c48af9d3908b63255(3) session-state: No cached attributes(3) # Executing section authorize from file /etc/freeradius/sites-enabled/default(3) authorize {(3) policy filter_username {(3) if (!&User-Name) {(3) if (!&User-Name) -> FALSE(3) if (&User-Name =~ / /) {(3) if (&User-Name =~ / /) -> FALSE(3) if (&User-Name =~ /@.*@/ ) {(3) if (&User-Name =~ /@.*@/ ) -> FALSE(3) if (&User-Name =~ /\.\./ ) {(3) if (&User-Name =~ /\.\./ ) -> FALSE(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(3) if (&User-Name =~ /\.$/) {(3) if (&User-Name =~ /\.$/) -> FALSE(3) if (&User-Name =~ /@\./) {(3) if (&User-Name =~ /@\./) -> FALSE(3) } # policy filter_username = notfound(3) [preprocess] = ok(3) [chap] = noop(3) [mschap] = noop(3) [digest] = noop(3) suffix: Checking for suffix after "@"(3) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL(3) suffix: No such realm "NULL"(3) [suffix] = noop(3) eap: Peer sent EAP Response (code 2) ID 4 length 6(3) eap: Continuing tunnel setup(3) [eap] = ok(3) } # authorize = ok(3) Found Auth-Type = EAP(3) # Executing group from file /etc/freeradius/sites-enabled/default(3) authenticate {(3) eap: Expiring EAP session with state 0x8aa7dbf488a3ce2f(3) eap: Finished EAP session with state 0x8aa7dbf488a3ce2f(3) eap: Previous EAP request found for state 0x8aa7dbf488a3ce2f, released from the list(3) eap: Peer sent packet with method EAP TTLS (21)(3) eap: Calling submodule eap_ttls to process data(3) eap_ttls: Authenticate(3) eap_ttls: Continuing EAP-TLS(3) eap_ttls: Peer ACKed our handshake fragment(3) eap_ttls: [eaptls verify] = request(3) eap_ttls: [eaptls process] = handled(3) eap: Sending EAP Request (code 1) ID 5 length 725(3) eap: EAP session adding &reply:State = 0x8aa7dbf489a2ce2f(3) [eap] = handled(3) } # authenticate = handled(3) Using Post-Auth-Type Challenge(3) Post-Auth-Type sub-section not found. Ignoring.(3) # Executing group from file /etc/freeradius/sites-enabled/default(3) Sent Access-Challenge Id 70 from <ip>:1812 to <ip>:59898 length 0(3) EAP-Message = 0x010502d5158000000a8f20417574686f72697479820900da1ed77d3b2c8ff1300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500(3) Message-Authenticator = 0x00000000000000000000000000000000(3) State = 0x8aa7dbf489a2ce2f8993e0490c51278d(3) Finished requestWaking up in 4.8 seconds.(4) Received Access-Request Id 71 from <ip>:59898 to <ip>:1812 length 347(4) User-Name = "hans.hering"(4) NAS-IP-Address = <ip>(4) NAS-Port = 0(4) NAS-Identifier = "<ip>"(4) NAS-Port-Type = Wireless-802.11(4) Calling-Station-Id = "4400100e904c"(4) Called-Station-Id = "186472cd167a"(4) Service-Type = Login-User(4) Framed-MTU = 1100(4) EAP-Message = 0x0205009015800000008616030100461000004241043d059fc34d75c809e28246cbef26b5353671cc04f909f887bcda2bfb46e9c5c3c7c5739285ff557b4dc0124534d952022cf360cbb002e29b8e6010ef9eeff15b1403010001011603010030954522307e8512ca2a646e52885316cf319a305831139d(4) State = 0x8aa7dbf489a2ce2f8993e0490c51278d(4) Aruba-Essid-Name = "<ssid>"(4) Aruba-Location-Id = "<apname>"(4) Aruba-AP-Group = "<apname>"(4) Message-Authenticator = 0xefbaccdfebd1d3f906dffd267d63b3d4(4) session-state: No cached attributes(4) # Executing section authorize from file /etc/freeradius/sites-enabled/default(4) authorize {(4) policy filter_username {(4) if (!&User-Name) {(4) if (!&User-Name) -> FALSE(4) if (&User-Name =~ / /) {(4) if (&User-Name =~ / /) -> FALSE(4) if (&User-Name =~ /@.*@/ ) {(4) if (&User-Name =~ /@.*@/ ) -> FALSE(4) if (&User-Name =~ /\.\./ ) {(4) if (&User-Name =~ /\.\./ ) -> FALSE(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(4) if (&User-Name =~ /\.$/) {(4) if (&User-Name =~ /\.$/) -> FALSE(4) if (&User-Name =~ /@\./) {(4) if (&User-Name =~ /@\./) -> FALSE(4) } # policy filter_username = notfound(4) [preprocess] = ok(4) [chap] = noop(4) [mschap] = noop(4) [digest] = noop(4) suffix: Checking for suffix after "@"(4) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL(4) suffix: No such realm "NULL"(4) [suffix] = noop(4) eap: Peer sent EAP Response (code 2) ID 5 length 144(4) eap: Continuing tunnel setup(4) [eap] = ok(4) } # authorize = ok(4) Found Auth-Type = EAP(4) # Executing group from file /etc/freeradius/sites-enabled/default(4) authenticate {(4) eap: Expiring EAP session with state 0x8aa7dbf489a2ce2f(4) eap: Finished EAP session with state 0x8aa7dbf489a2ce2f(4) eap: Previous EAP request found for state 0x8aa7dbf489a2ce2f, released from the list(4) eap: Peer sent packet with method EAP TTLS (21)(4) eap: Calling submodule eap_ttls to process data(4) eap_ttls: Authenticate(4) eap_ttls: Continuing EAP-TLS(4) eap_ttls: Peer indicated complete TLS record size will be 134 bytes(4) eap_ttls: Got complete TLS record (134 bytes)(4) eap_ttls: [eaptls verify] = length included(4) eap_ttls: <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange (4) eap_ttls: TLS_accept: SSLv3 read client key exchange A(4) eap_ttls: <<< TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_ttls: <<< TLS 1.0 Handshake [length 0010], Finished (4) eap_ttls: TLS_accept: SSLv3 read finished A(4) eap_ttls: >>> TLS 1.0 ChangeCipherSpec [length 0001] (4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A(4) eap_ttls: >>> TLS 1.0 Handshake [length 0010], Finished (4) eap_ttls: TLS_accept: SSLv3 write finished A(4) eap_ttls: TLS_accept: SSLv3 flush data(4) eap_ttls: (other): SSL negotiation finished successfully(4) eap_ttls: SSL Connection Established(4) eap_ttls: [eaptls process] = handled(4) eap: Sending EAP Request (code 1) ID 6 length 69(4) eap: EAP session adding &reply:State = 0x8aa7dbf48ea1ce2f(4) [eap] = handled(4) } # authenticate = handled(4) Using Post-Auth-Type Challenge(4) Post-Auth-Type sub-section not found. Ignoring.(4) # Executing group from file /etc/freeradius/sites-enabled/default(4) Sent Access-Challenge Id 71 from <ip>:1812 to <ip>:59898 length 0(4) EAP-Message = 0x0106004515800000003b14030100010116030100303df00af3f5b715f6f8a2e59efbbcd7cf2e70d4d3391ec7706b0e96ace65e108dab33d36f365c0040c5b627503d501828(4) Message-Authenticator = 0x00000000000000000000000000000000(4) State = 0x8aa7dbf48ea1ce2f8993e0490c51278d(4) Finished requestWaking up in 4.8 seconds.(5) Received Access-Request Id 72 from <ip>:59898 to <ip>:1812 length 266(5) User-Name = "hans.hering"(5) NAS-IP-Address = <ip>(5) NAS-Port = 0(5) NAS-Identifier = "<ip>"(5) NAS-Port-Type = Wireless-802.11(5) Calling-Station-Id = "4400100e904c"(5) Called-Station-Id = "186472cd167a"(5) Service-Type = Login-User(5) Framed-MTU = 1100(5) EAP-Message = 0x0206003f1580000000351703010030c39c440ecadb79d70661f5c2457440ae369e59eb3b10505f97b78b5d96cc87fb563fb5cb5edc6057e18560f1b7fafcfd(5) State = 0x8aa7dbf48ea1ce2f8993e0490c51278d(5) Aruba-Essid-Name = "<ssid>"(5) Aruba-Location-Id = "<apname>"(5) Aruba-AP-Group = "<apname>"(5) Message-Authenticator = 0x63c04f4574a68ea285f031dc5bda5089(5) session-state: No cached attributes(5) # Executing section authorize from file /etc/freeradius/sites-enabled/default(5) authorize {(5) policy filter_username {(5) if (!&User-Name) {(5) if (!&User-Name) -> FALSE(5) if (&User-Name =~ / /) {(5) if (&User-Name =~ / /) -> FALSE(5) if (&User-Name =~ /@.*@/ ) {(5) if (&User-Name =~ /@.*@/ ) -> FALSE(5) if (&User-Name =~ /\.\./ ) {(5) if (&User-Name =~ /\.\./ ) -> FALSE(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(5) if (&User-Name =~ /\.$/) {(5) if (&User-Name =~ /\.$/) -> FALSE(5) if (&User-Name =~ /@\./) {(5) if (&User-Name =~ /@\./) -> FALSE(5) } # policy filter_username = notfound(5) [preprocess] = ok(5) [chap] = noop(5) [mschap] = noop(5) [digest] = noop(5) suffix: Checking for suffix after "@"(5) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL(5) suffix: No such realm "NULL"(5) [suffix] = noop(5) eap: Peer sent EAP Response (code 2) ID 6 length 63(5) eap: Continuing tunnel setup(5) [eap] = ok(5) } # authorize = ok(5) Found Auth-Type = EAP(5) # Executing group from file /etc/freeradius/sites-enabled/default(5) authenticate {(5) eap: Expiring EAP session with state 0x8aa7dbf48ea1ce2f(5) eap: Finished EAP session with state 0x8aa7dbf48ea1ce2f(5) eap: Previous EAP request found for state 0x8aa7dbf48ea1ce2f, released from the list(5) eap: Peer sent packet with method EAP TTLS (21)(5) eap: Calling submodule eap_ttls to process data(5) eap_ttls: Authenticate(5) eap_ttls: Continuing EAP-TLS(5) eap_ttls: Peer indicated complete TLS record size will be 53 bytes(5) eap_ttls: Got complete TLS record (53 bytes)(5) eap_ttls: [eaptls verify] = length included(5) eap_ttls: [eaptls process] = ok(5) eap_ttls: Session established. Proceeding to decode tunneled attributes(5) eap_ttls: Got tunneled request(5) eap_ttls: EAP-Message = 0x020000100168616e732e686572696e67(5) eap_ttls: Got tunneled identity of hans.hering(5) eap_ttls: Setting default EAP type for tunneled EAP session(5) eap_ttls: Sending tunneled request(5) Virtual server inner-tunnel received request(5) EAP-Message = 0x020000100168616e732e686572696e67(5) User-Name = "hans.hering"(5) server inner-tunnel {(5) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel(5) authorize {(5) [chap] = noop(5) [mschap] = noop(5) suffix: Checking for suffix after "@"(5) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL(5) suffix: No such realm "NULL"(5) [suffix] = noop(5) update control {(5) &Proxy-To-Realm := LOCAL(5) } # update control = noop(5) eap: Peer sent EAP Response (code 2) ID 0 length 16(5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize(5) [eap] = ok(5) } # authorize = ok(5) Found Auth-Type = EAP(5) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel(5) authenticate {(5) eap: Peer sent packet with method EAP Identity (1)(5) eap: Calling submodule eap_md5 to process data(5) eap_md5: Issuing MD5 Challenge(5) eap: Sending EAP Request (code 1) ID 1 length 22(5) eap: EAP session adding &reply:State = 0x47026ba347036f9f(5) [eap] = handled(5) } # authenticate = handled(5) } # server inner-tunnel(5) Virtual server sending reply(5) EAP-Message = 0x01010016041081dfab5920bbad29c708489ae35dc75f(5) Message-Authenticator = 0x00000000000000000000000000000000(5) State = 0x47026ba347036f9fb85e0642fabc31d4(5) eap_ttls: Got tunneled Access-Challenge(5) eap: Sending EAP Request (code 1) ID 7 length 79(5) eap: EAP session adding &reply:State = 0x8aa7dbf48fa0ce2f(5) [eap] = handled(5) } # authenticate = handled(5) Using Post-Auth-Type Challenge(5) Post-Auth-Type sub-section not found. Ignoring.(5) # Executing group from file /etc/freeradius/sites-enabled/default(5) Sent Access-Challenge Id 72 from <ip>:1812 to <ip>:59898 length 0(5) EAP-Message = 0x0107004f1580000000451703010040c1a48501dcf5e2b5d4a72196219fa0f279498885465d123a4c95d6490ec55d1496b6503b8410ce0b7c568fc6e46440e90e4730eb8883c0e71a858916a1a66354(5) Message-Authenticator = 0x00000000000000000000000000000000(5) State = 0x8aa7dbf48fa0ce2f8993e0490c51278d(5) Finished requestWaking up in 4.7 seconds.(6) Received Access-Request Id 73 from <ip>:59898 to <ip>:1812 length 298(6) User-Name = "hans.hering"(6) NAS-IP-Address = <ip>(6) NAS-Port = 0(6) NAS-Identifier = "<ip>"(6) NAS-Port-Type = Wireless-802.11(6) Calling-Station-Id = "4400100e904c"(6) Called-Station-Id = "186472cd167a"(6) Service-Type = Login-User(6) Framed-MTU = 1100(6) EAP-Message = 0x0207005f1580000000551703010050e5017cf29ca351ffb06cf4226e56c7883502556146fae26cdf965b030636de8a2610906ac579874eddfd9f70e78328af1248d230f5341da8e86db06d17154a8da3f6531540e5a2d35d4bc51e942c9beb(6) State = 0x8aa7dbf48fa0ce2f8993e0490c51278d(6) Aruba-Essid-Name = "<ssid>"(6) Aruba-Location-Id = "<apname>"(6) Aruba-AP-Group = "<apname>"(6) Message-Authenticator = 0x68cac7c8d75f2ff01b8a0e0ab93beeb6(6) session-state: No cached attributes(6) # Executing section authorize from file /etc/freeradius/sites-enabled/default(6) authorize {(6) policy filter_username {(6) if (!&User-Name) {(6) if (!&User-Name) -> FALSE(6) if (&User-Name =~ / /) {(6) if (&User-Name =~ / /) -> FALSE(6) if (&User-Name =~ /@.*@/ ) {(6) if (&User-Name =~ /@.*@/ ) -> FALSE(6) if (&User-Name =~ /\.\./ ) {(6) if (&User-Name =~ /\.\./ ) -> FALSE(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(6) if (&User-Name =~ /\.$/) {(6) if (&User-Name =~ /\.$/) -> FALSE(6) if (&User-Name =~ /@\./) {(6) if (&User-Name =~ /@\./) -> FALSE(6) } # policy filter_username = notfound(6) [preprocess] = ok(6) [chap] = noop(6) [mschap] = noop(6) [digest] = noop(6) suffix: Checking for suffix after "@"(6) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL(6) suffix: No such realm "NULL"(6) [suffix] = noop(6) eap: Peer sent EAP Response (code 2) ID 7 length 95(6) eap: Continuing tunnel setup(6) [eap] = ok(6) } # authorize = ok(6) Found Auth-Type = EAP(6) # Executing group from file /etc/freeradius/sites-enabled/default(6) authenticate {(6) eap: Expiring EAP session with state 0x47026ba347036f9f(6) eap: Finished EAP session with state 0x8aa7dbf48fa0ce2f(6) eap: Previous EAP request found for state 0x8aa7dbf48fa0ce2f, released from the list(6) eap: Peer sent packet with method EAP TTLS (21)(6) eap: Calling submodule eap_ttls to process data(6) eap_ttls: Authenticate(6) eap_ttls: Continuing EAP-TLS(6) eap_ttls: Peer indicated complete TLS record size will be 85 bytes(6) eap_ttls: Got complete TLS record (85 bytes)(6) eap_ttls: [eaptls verify] = length included(6) eap_ttls: [eaptls process] = ok(6) eap_ttls: Session established. Proceeding to decode tunneled attributes(6) eap_ttls: Got tunneled request(6) eap_ttls: EAP-Message = 0x020100210410a1caf80086694cc7efcdb9214433cb1f68616e732e686572696e67(6) eap_ttls: Sending tunneled request(6) Virtual server inner-tunnel received request(6) EAP-Message = 0x020100210410a1caf80086694cc7efcdb9214433cb1f68616e732e686572696e67(6) User-Name = "hans.hering"(6) State = 0x47026ba347036f9fb85e0642fabc31d4(6) server inner-tunnel {(6) session-state: No cached attributes(6) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel(6) authorize {(6) [chap] = noop(6) [mschap] = noop(6) suffix: Checking for suffix after "@"(6) suffix: No '@' in User-Name = "hans.hering", looking up realm NULL(6) suffix: No such realm "NULL"(6) [suffix] = noop(6) update control {(6) &Proxy-To-Realm := LOCAL(6) } # update control = noop(6) eap: Peer sent EAP Response (code 2) ID 1 length 33(6) eap: No EAP Start, assuming it's an on-going EAP conversation(6) [eap] = updated(6) [files] = nooprlm_ldap (ldap): Reserved connection (0)(6) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})(6) ldap: --> (uid=hans.hering)(6) ldap: Performing search in "dc=xxx,dc=xxx" with filter "(uid=hans.hering)", scope "sub"(6) ldap: Waiting for search result...(6) ldap: User object found at DN "uid=hans.hering,ou=xxx,dc=xxx,dc=xxx"(6) ldap: Processing user attributes(6) ldap: control:Password-With-Header += '{SSHA}IiE+U9IKv4ttaILiThSWbftqrdBOSERS0nuCKQ=='rlm_ldap (ldap): Released connection (0)rlm_ldap (ldap): Need 5 more connections to reach 10 sparesrlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots usedrlm_ldap (ldap): Connecting to ldaps://<url>:636rlm_ldap (ldap): Waiting for bind result...rlm_ldap (ldap): Bind successful(6) [ldap] = updated(6) [expiration] = noop(6) [logintime] = noop(6) pap: Converted: Password-With-Header -> SSHA1-Password(6) pap: Removing &control:Password-With-Header(6) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes(6) pap: WARNING: Auth-Type already set. Not setting to PAP(6) [pap] = noop(6) } # authorize = updated(6) Found Auth-Type = EAP(6) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel(6) authenticate {(6) eap: Expiring EAP session with state 0x47026ba347036f9f(6) eap: Finished EAP session with state 0x47026ba347036f9f(6) eap: Previous EAP request found for state 0x47026ba347036f9f, released from the list(6) eap: Peer sent packet with method EAP MD5 (4)(6) eap: Calling submodule eap_md5 to process data(6) eap_md5: Cleartext-Password is required for EAP-MD5 authentication(6) eap: ERROR: Failed continuing EAP MD5 (4) session. EAP sub-module failed(6) eap: Sending EAP Failure (code 4) ID 1 length 4(6) eap: Failed in EAP select(6) [eap] = invalid(6) } # authenticate = invalid(6) Failed to authenticate the user(6) Using Post-Auth-Type Reject(6) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel(6) Post-Auth-Type REJECT {(6) attr_filter.access_reject: EXPAND %{User-Name}(6) attr_filter.access_reject: --> hans.hering(6) attr_filter.access_reject: Matched entry DEFAULT at line 11(6) [attr_filter.access_reject] = updated(6) update outer.session-state {(6) &Module-Failure-Message := &request:Module-Failure-Message -> 'eap: Failed continuing EAP MD5 (4) session. EAP sub-module failed'(6) } # update outer.session-state = noop(6) } # Post-Auth-Type REJECT = updated(6) } # server inner-tunnel(6) Virtual server sending reply(6) EAP-Message = 0x04010004(6) Message-Authenticator = 0x00000000000000000000000000000000(6) eap_ttls: Got tunneled Access-Reject(6) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed(6) eap: Sending EAP Failure (code 4) ID 7 length 4(6) eap: Failed in EAP select(6) [eap] = invalid(6) } # authenticate = invalid(6) Failed to authenticate the user(6) Using Post-Auth-Type Reject(6) # Executing group from file /etc/freeradius/sites-enabled/default(6) Post-Auth-Type REJECT {(6) attr_filter.access_reject: EXPAND %{User-Name}(6) attr_filter.access_reject: --> hans.hering(6) attr_filter.access_reject: Matched entry DEFAULT at line 11(6) [attr_filter.access_reject] = updated(6) [eap] = noop(6) policy remove_reply_message_if_eap {(6) if (&reply:EAP-Message && &reply:Reply-Message) {(6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE(6) else {(6) [noop] = noop(6) } # else = noop(6) } # policy remove_reply_message_if_eap = noop(6) } # Post-Auth-Type REJECT = updated(6) Delaying response for 1.000000 secondsWaking up in 0.2 seconds.Waking up in 0.7 seconds.(6) Sending delayed response(6) Sent Access-Reject Id 73 from <ip>:1812 to <ip>:59898 length 44(6) EAP-Message = 0x04070004(6) Message-Authenticator = 0x00000000000000000000000000000000Waking up in 3.6 seconds.(0) Cleaning up request packet ID 67 with timestamp +24(1) Cleaning up request packet ID 68 with timestamp +24(2) Cleaning up request packet ID 69 with timestamp +24(3) Cleaning up request packet ID 70 with timestamp +24(4) Cleaning up request packet ID 71 with timestamp +24(5) Cleaning up request packet ID 72 with timestamp +25(6) Cleaning up request packet ID 73 with timestamp +25Ready to process requests