I am finding that auth requests are proxied, as expected, but not accounting. This appears to affect domain names which are proxied according to wildcard entries in the users file as follows: # following is used to map subdomains of *.abc.co.uk # to be proxied according to the realm abc.co.uk DEFAULT User-Name =~ "@.*\.abc\.co\.uk$", Proxy-To-Realm := "abc.co.uk" it doesn't affect those domains which are actually fully specified in the proxy.conf file. the follign compares the radiusd -X output for an auth only request, and an acct start/stop. any ideas? is this a bug? i am using freeradius 1.0.2 on linux debian 3.1. Tariq ---------- AUTH: rad_recv: Access-Request packet from host 212.135.9.6:1499, id=15, length=113 User-Name = "exampleuser@dsl3.ukonline.co.uk" Service-Type = Framed-User NAS-IP-Address = 82.108.57.17 NAS-Port = 1234 Called-Station-Id = "123456789" Calling-Station-Id = "987654321" NAS-Port-Type = Async User-Password = "***" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: Looking up realm "dsl3.ukonline.co.uk" for User-Name = "exampleuser@dsl3.ukonline.co.uk" rlm_realm: No such realm "dsl3.ukonline.co.uk" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 users: Matched entry DEFAULT at line 7 modcall[authorize]: module "files" returns ok for request 1 modcall: group authorize returns ok for request 1 Processing the pre-proxy section of radiusd.conf modcall: entering group pre-proxy for request 1 radius_xlat: '/opt/freeradius102/var/log/radius/radacct/212.135.9.6/pre-proxy-detail-2005 0805' rlm_detail: /opt/freeradius102/var/log/radius/radacct/%{Client-IP-Address}/pre-proxy-det ail-%Y%m%d expands to /opt/freeradius102/var/log/radius/radacct/212.135.9.6/pre-proxy-detail-20050 805 modcall[pre-proxy]: module "pre_proxy_log" returns ok for request 1 modcall: group pre-proxy returns ok for request 1 Sending Access-Request of id 0 to 195.40.1.66:1645 User-Name = "exampleuser@dsl3.ukonline.co.uk" Service-Type = Framed-User NAS-IP-Address = 82.108.57.17 NAS-Port = 1234 Called-Station-Id = "123456789" Calling-Station-Id = "987654321" NAS-Port-Type = Async User-Password = "***" Proxy-State = 0x3135 --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Accept packet from host 195.40.1.66:1645, id=0, length=66 Framed-Protocol = PPP Framed-IP-Address = 87.81.112.13 Framed-IP-Netmask = 255.255.255.255 X-Ascend-Client-Primary-DNS = 212.135.1.36 X-Ascend-Client-Secondary-DNS = 195.40.1.36 X-Ascend-Client-Assign-DNS = 1 Service-Type = Framed-User Proxy-State = 0x3135 Processing the post-proxy section of radiusd.conf modcall: entering group post-proxy for request 1 radius_xlat: '/opt/freeradius102/var/log/radius/radacct/212.135.9.6/post-proxy-detail-200 50805' rlm_detail: /opt/freeradius102/var/log/radius/radacct/%{Client-IP-Address}/post-proxy-de tail-%Y%m%d expands to /opt/freeradius102/var/log/radius/radacct/212.135.9.6/post-proxy-detail-2005 0805 modcall[post-proxy]: module "post_proxy_log" returns ok for request 1 modcall[post-proxy]: module "eap" returns noop for request 1 modcall: group post-proxy returns ok for request 1 authorize: Skipping authorize in post-proxy stage rad_check_password: Found Auth-Type rad_check_password: Auth-Type = Accept, accepting the user Sending Access-Accept of id 15 to 212.135.9.6:1499 Framed-Protocol = PPP Framed-IP-Address = 87.81.112.13 Framed-IP-Netmask = 255.255.255.255 X-Ascend-Client-Primary-DNS = 212.135.1.36 X-Ascend-Client-Secondary-DNS = 195.40.1.36 X-Ascend-Client-Assign-DNS = 1 Service-Type = Framed-User ----------------- ACCT: rad_recv: Accounting-Request packet from host 212.135.9.6:1512, id=29, length=117 User-Name = "exampleuser@dsl3.ukonline.co.uk" Service-Type = Framed-User NAS-IP-Address = 82.108.57.17 NAS-Port = 1234 NAS-Port-Type = Async Acct-Session-Id = "00001234" Acct-Status-Type = Start Called-Station-Id = "123456789" Calling-Station-Id = "987654321" Acct-Delay-Time = 0 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 2 modcall[preacct]: module "preprocess" returns noop for request 2 rlm_acct_unique: Hashing 'NAS-Port = 1234,Client-IP-Address = 212.135.9.6,NAS-IP-Address = 82.108.57.17,Acct-Session-Id = "00001234",User-Name = "exampleuser@dsl3.ukonline.co.uk"' rlm_acct_unique: Acct-Unique-Session-ID = "d0c84fbbd11b50cb". modcall[preacct]: module "acct_unique" returns ok for request 2 rlm_realm: Looking up realm "dsl3.ukonline.co.uk" for User-Name = "exampleuser@dsl3.ukonline.co.uk" rlm_realm: No such realm "dsl3.ukonline.co.uk" modcall[preacct]: module "suffix" returns noop for request 2 modcall[preacct]: module "files" returns noop for request 2 modcall: group preacct returns ok for request 2 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 2 radius_xlat: '/opt/freeradius102/var/log/radius/radacct/212.135.9.6/detail-20050805' rlm_detail: /opt/freeradius102/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /opt/freeradius102/var/log/radius/radacct/212.135.9.6/detail-20050805 modcall[accounting]: module "detail" returns ok for request 2 modcall[accounting]: module "unix" returns ok for request 2 radius_xlat: '/opt/freeradius102/var/log/radius/radutmp' radius_xlat: 'exampleuser@dsl3.ukonline.co.uk' modcall[accounting]: module "radutmp" returns ok for request 2 modcall: group accounting returns ok for request 2 Sending Accounting-Response of id 29 to 212.135.9.6:1512 Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Accounting-Request packet from host 212.135.9.6:1512, id=30, length=135 User-Name = "exampleuser@dsl3.ukonline.co.uk" Service-Type = Framed-User NAS-IP-Address = 82.108.57.17 NAS-Port = 1234 NAS-Port-Type = Async Acct-Session-Id = "00001234" Acct-Status-Type = Stop Called-Station-Id = "123456789" Calling-Station-Id = "987654321" Acct-Delay-Time = 0 Acct-Session-Time = 1000 Acct-Input-Octets = 20000 Acct-Output-Octets = 30000 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 3 modcall[preacct]: module "preprocess" returns noop for request 3 rlm_acct_unique: Hashing 'NAS-Port = 1234,Client-IP-Address = 212.135.9.6,NAS-IP-Address = 82.108.57.17,Acct-Session-Id = "00001234",User-Name = "exampleuser@dsl3.ukonline.co.uk"' rlm_acct_unique: Acct-Unique-Session-ID = "d0c84fbbd11b50cb". modcall[preacct]: module "acct_unique" returns ok for request 3 rlm_realm: Looking up realm "dsl3.ukonline.co.uk" for User-Name = "exampleuser@dsl3.ukonline.co.uk" rlm_realm: No such realm "dsl3.ukonline.co.uk" modcall[preacct]: module "suffix" returns noop for request 3 modcall[preacct]: module "files" returns noop for request 3 modcall: group preacct returns ok for request 3 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 3 radius_xlat: '/opt/freeradius102/var/log/radius/radacct/212.135.9.6/detail-20050805' rlm_detail: /opt/freeradius102/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /opt/freeradius102/var/log/radius/radacct/212.135.9.6/detail-20050805 modcall[accounting]: module "detail" returns ok for request 3 modcall[accounting]: module "unix" returns ok for request 3 radius_xlat: '/opt/freeradius102/var/log/radius/radutmp' radius_xlat: 'exampleuser@dsl3.ukonline.co.uk' modcall[accounting]: module "radutmp" returns ok for request 3 modcall: group accounting returns ok for request 3 Sending Accounting-Response of id 30 to 212.135.9.6:1512 Finished request 3