Re: MSCHAP DC Server Authentication winbind reply failed

22 Jun 2021


      Thanks for your help, but when I run ntlm_auth and wbinfo manually, there
is no problem. Therefore I thought I might have misconfigured something on
the FreeRADIUS side.

On Tue, 22 Jun 2021 at 10:12, L.P.H. van Belle via Freeradius-Users <
freeradius-users@lists.freeradius.org> wrote:
...
I think you should fix your samba setup first.
Your smb.conf is not correctly setup and without that being correctly
ntlm_auth is not going to work in free radius
Read :
https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_Member
And read :
https://wiki.samba.org/index.php/Authenticating_Freeradius_against_Active_Di...
For FreeRadius and auth only, RID (or autorid) setup is sufficient
Greetz,
Louis
...
-----Oorspronkelijk bericht-----
Van: Freeradius-Users
[mailto:freeradius-users-bounces+belle=bazuin.nl@lists.freerad
ius.org] Namens Vertigo Altair
Verzonden: maandag 21 juni 2021 21:26
Aan: FreeRadius users mailing list
Onderwerp: MSCHAP DC Server Authentication winbind reply failed
Hi FreeRADIUS!
I'm trying to use FreeRADIUS with MSCHAP through a DC server.
However, I'm
getting an error like "winbind reply failed!"
I'm running on OpenBSD 6.9.
FreeRADIUS version:
# /usr/local/sbin/radiusd -v | head -1
radiusd: FreeRADIUS Version 3.0.21, for host
x86_64-unknown-openbsd6.9,
built on Apr 20 2021 at 05:14:02
#
My configuration is like that;
=============
# cat /etc/samba/smb.conf
[global]
winbind use default domain = no
 security = ads
 netbios name = myhost
 workgroup = MYWORKGROUP
 realm = zz.example.com
 password server = zz.example.com
==============
I joined the DC server successfully;
# net join -U myadmin
Using short domain name -- XX
Joined 'YY' to dns domain 'zz.example.com'
No DNS domain configured for myhost. Unable to perform DNS Update.
=============
I can make challange based authentication with wbinfo;
# wbinfo -a myuser%mypass
plaintext password authentication failed              <<< FAIL
Could not authenticate user myuser%mypass with plaintext password
challenge/response password authentication succeeded
#
===============
And also with ntlm_auth;
# ntlm_auth --request-nt-key --username myuser
Password: myuser
NT_STATUS_OK: The operation completed successfully. (0x0)
#
==================
I've created a user named "winbindd_priv" and added this user the
_freeradius group to access winbind privileged socket from FreeRADIUS
# cat /etc/group |grep winbind
winbindd_priv:*:1000:_freeradius
# ls -la /var/run/samba/winbindd*
-rw-r--r--  1 root  winbindd_priv  6 Jun 21 18:39
/var/run/samba/winbindd.pid
/var/run/samba/winbindd:
srwxrwxrwx  1 root  winbindd_priv    0 Jun 21 18:38 pipe
#
===================
I couldn't see anything wrong there, I followed the official
documentation
properly. I'm getting  "winbind reply failed!" error anyway.
The full output from radiusd -X;
======================
(0) Received Access-Request Id 25 from 172.100.0.60:49947 to
172.16.0.100:1812 length 338
(0)   User-Name = "mypc-pc\\Administrator"
(0)   NAS-Port = 20497
(0)   Service-Type = Framed-User
(0)   Framed-Protocol = PPP
(0)   Calling-Station-Id = "44a8-42f7-952d"
(0)   NAS-Identifier = "S5735_K6_SW1"
(0)   NAS-Port-Type = Ethernet
(0)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(0)   EAP-Message =
0x02a3001c01626c6774656b2d70635c41646d696e6973747261746f72
(0)   Message-Authenticator = 0x2da911933329aa455da04b910df9e08e
(0)   Called-Station-Id = "44-67-47-26-F7-90"
(0)   NAS-IP-Address = 172.100.0.60
(0)   Framed-MTU = 1500
(0)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(0)   Huawei-Startup-Stamp = 1589932873
(0)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(0)   Huawei-Connect-ID = 45
(0)   Huawei-Version = "Huawei S5735"
(0)   Huawei-Product-ID = "S5735"
(0)   Huawei-User-Mac = "\000\000\000\001"
(0)   Huawei-Domain-Name = "default"
(0) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     update {
(0)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(0)       EXPAND --username=%{User-Name}
(0)          --> --username=mypc-pc\\Administrator
(0)       EXPAND --calledStationID=%{Called-Station-Id}
(0)          --> --calledStationID=44-67-47-26-F7-90
(0)       EXPAND --callingStationID=%{Calling-Station-Id}
(0)          --> --callingStationID=44a8-42f7-952d
(0)       EXPAND --connectInfo=%{Connect-Info}
(0)          --> --connectInfo=
(0)       EXPAND --framedMTU=%{Framed-MTU}
(0)          --> --framedMTU=1500
(0)       EXPAND --framedProtocol=%{Framed-Protocol}
(0)          --> --framedProtocol=PPP
(0)       EXPAND --nasIdentifier=%{NAS-Identifier}
(0)          --> --nasIdentifier=S5735_K6_SW1
(0)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(0)          --> --nasIPAddress=172.100.0.60
(0)       EXPAND --nasPort=%{NAS-Port}
(0)          --> --nasPort=20497
(0)       EXPAND --nasPortID=%{NAS-Port-Id}
(0)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(0)       EXPAND --nasPortType=%{NAS-Port-Type}
(0)          --> --nasPortType=Ethernet
(0)       EXPAND --serviceType=%{Service-Type}
(0)          --> --serviceType=Framed-User
(0)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(0)          --> --tunnelMediumType=
(0)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(0)          --> --tunnelPrivateGroupID=
(0)       EXPAND --tunnelType=%{Tunnel-Type}
(0)          --> --tunnelType=
(0)       Program returned code (0) and output 'Reply-Message :=""'
(0)       control::Reply-Message :=
(0)     } # update = noop
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = noop
(0)     } # policy filter_username = noop
(0)     [preprocess] = ok
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 163 length 28
(0) eap: EAP-Identity reply, returning 'ok' so we can
short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 164 length 22
(0) eap: EAP session adding &reply:State = 0x06df9fcc067b9baa
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(0) Sent Access-Challenge Id 25 from 172.16.0.100:1812 to
172.100.0.60:49947 length
0
(0)   EAP-Message = 0x01a400160410fb53358fd5f5bb176cb25434be27dc38
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x06df9fcc067b9baa43639075ca7d333a
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 26 from 172.100.0.60:49947 to
172.16.0.100:1812 length 340
(1)   User-Name = "mypc-pc\\Administrator"
(1)   NAS-Port = 20497
(1)   Service-Type = Framed-User
(1)   Framed-Protocol = PPP
(1)   Calling-Station-Id = "44a8-42f7-952d"
(1)   NAS-Identifier = "S5735_K6_SW1"
(1)   NAS-Port-Type = Ethernet
(1)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(1)   State = 0x06df9fcc067b9baa43639075ca7d333a
(1)   EAP-Message = 0x02a400060319
(1)   Message-Authenticator = 0xf104c44a25c93bccb28f9f2e00f4333c
(1)   Called-Station-Id = "44-67-47-26-F7-90"
(1)   Login-IP-Host = 0.0.0.0
(1)   NAS-IP-Address = 172.100.0.60
(1)   Framed-MTU = 1500
(1)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(1)   Huawei-Startup-Stamp = 1589932873
(1)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(1)   Huawei-Connect-ID = 45
(1)   Huawei-Version = "Huawei S5735"
(1)   Huawei-Product-ID = "S5735"
(1)   Huawei-User-Mac = "\000\000\000\001"
(1)   Huawei-Domain-Name = "default"
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(1)   authorize {
(1)     update {
(1)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(1)       EXPAND --username=%{User-Name}
(1)          --> --username=mypc-pc\\Administrator
(1)       EXPAND --calledStationID=%{Called-Station-Id}
(1)          --> --calledStationID=44-67-47-26-F7-90
(1)       EXPAND --callingStationID=%{Calling-Station-Id}
(1)          --> --callingStationID=44a8-42f7-952d
(1)       EXPAND --connectInfo=%{Connect-Info}
(1)          --> --connectInfo=
(1)       EXPAND --framedMTU=%{Framed-MTU}
(1)          --> --framedMTU=1500
(1)       EXPAND --framedProtocol=%{Framed-Protocol}
(1)          --> --framedProtocol=PPP
(1)       EXPAND --nasIdentifier=%{NAS-Identifier}
(1)          --> --nasIdentifier=S5735_K6_SW1
(1)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(1)          --> --nasIPAddress=172.100.0.60
(1)       EXPAND --nasPort=%{NAS-Port}
(1)          --> --nasPort=20497
(1)       EXPAND --nasPortID=%{NAS-Port-Id}
(1)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(1)       EXPAND --nasPortType=%{NAS-Port-Type}
(1)          --> --nasPortType=Ethernet
(1)       EXPAND --serviceType=%{Service-Type}
(1)          --> --serviceType=Framed-User
(1)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(1)          --> --tunnelMediumType=
(1)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(1)          --> --tunnelPrivateGroupID=
(1)       EXPAND --tunnelType=%{Tunnel-Type}
(1)          --> --tunnelType=
(1)       Program returned code (0) and output 'Reply-Message :=""'
(1)       control::Reply-Message :=
(1)     } # update = noop
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = noop
(1)     } # policy filter_username = noop
(1)     [preprocess] = ok
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 164 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [expiration] = noop
(1)     [logintime] = noop
Not doing PAP as Auth-Type is already set.
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x06df9fcc067b9baa
(1) eap: Finished EAP session with state 0x06df9fcc067b9baa
(1) eap: Previous EAP request found for state
0x06df9fcc067b9baa, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 165 length 6
(1) eap: EAP session adding &reply:State = 0x06df9fcc077a86aa
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(1) Sent Access-Challenge Id 26 from 172.16.0.100:1812 to
172.100.0.60:49947 length
0
(1)   EAP-Message = 0x01a500061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x06df9fcc077a86aa43639075ca7d333a
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 27 from 172.100.0.60:49947 to
172.16.0.100:1812 length 447
(2)   User-Name = "mypc-pc\\Administrator"
(2)   NAS-Port = 20497
(2)   Service-Type = Framed-User
(2)   Framed-Protocol = PPP
(2)   Calling-Station-Id = "44a8-42f7-952d"
(2)   NAS-Identifier = "S5735_K6_SW1"
(2)   NAS-Port-Type = Ethernet
(2)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(2)   State = 0x06df9fcc077a86aa43639075ca7d333a
(2)   EAP-Message =
0x02a5007119800000006716030100620100005e030160d0e32a6722bce315
95a5e36c093697851bb230673e9d56c34961448f20d9c300001cc014c01300
3900330035002fc00ac00900380032000a00130005000401000019000a0006
000400170018000b0002010000170000ff01000100
(2)   Message-Authenticator = 0x8e36104449de451d2f46716428d8d1d0
(2)   Called-Station-Id = "44-67-47-26-F7-90"
(2)   Login-IP-Host = 0.0.0.0
(2)   NAS-IP-Address = 172.100.0.60
(2)   Framed-MTU = 1500
(2)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(2)   Huawei-Startup-Stamp = 1589932873
(2)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(2)   Huawei-Connect-ID = 45
(2)   Huawei-Version = "Huawei S5735"
(2)   Huawei-Product-ID = "S5735"
(2)   Huawei-User-Mac = "\000\000\000\001"
(2)   Huawei-Domain-Name = "default"
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(2)   authorize {
(2)     update {
(2)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(2)       EXPAND --username=%{User-Name}
(2)          --> --username=mypc-pc\\Administrator
(2)       EXPAND --calledStationID=%{Called-Station-Id}
(2)          --> --calledStationID=44-67-47-26-F7-90
(2)       EXPAND --callingStationID=%{Calling-Station-Id}
(2)          --> --callingStationID=44a8-42f7-952d
(2)       EXPAND --connectInfo=%{Connect-Info}
(2)          --> --connectInfo=
(2)       EXPAND --framedMTU=%{Framed-MTU}
(2)          --> --framedMTU=1500
(2)       EXPAND --framedProtocol=%{Framed-Protocol}
(2)          --> --framedProtocol=PPP
(2)       EXPAND --nasIdentifier=%{NAS-Identifier}
(2)          --> --nasIdentifier=S5735_K6_SW1
(2)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(2)          --> --nasIPAddress=172.100.0.60
(2)       EXPAND --nasPort=%{NAS-Port}
(2)          --> --nasPort=20497
(2)       EXPAND --nasPortID=%{NAS-Port-Id}
(2)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(2)       EXPAND --nasPortType=%{NAS-Port-Type}
(2)          --> --nasPortType=Ethernet
(2)       EXPAND --serviceType=%{Service-Type}
(2)          --> --serviceType=Framed-User
(2)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(2)          --> --tunnelMediumType=
(2)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(2)          --> --tunnelPrivateGroupID=
(2)       EXPAND --tunnelType=%{Tunnel-Type}
(2)          --> --tunnelType=
(2)       Program returned code (0) and output 'Reply-Message :=""'
(2)       control::Reply-Message :=
(2)     } # update = noop
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = noop
(2)     } # policy filter_username = noop
(2)     [preprocess] = ok
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 165 length 113
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x06df9fcc077a86aa
(2) eap: Finished EAP session with state 0x06df9fcc077a86aa
(2) eap: Previous EAP request found for state
0x06df9fcc077a86aa, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be
103 bytes
(2) eap_peap: Got complete TLS record (103 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before accept initialization
(2) eap_peap: <<< recv UNKNOWN TLS VERSION '0304' [length 0062]
(2) eap_peap: TLS_accept: SSLv3 read client hello A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0037], ServerHello
(2) eap_peap: TLS_accept: SSLv3 write server hello A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 08e5], Certificate
(2) eap_peap: TLS_accept: SSLv3 write certificate A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 014b],
ServerKeyExchange
(2) eap_peap: TLS_accept: SSLv3 write key exchange A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0004],
ServerHelloDone
(2) eap_peap: TLS_accept: SSLv3 write server done A
(2) eap_peap: TLS_accept: SSLv3 flush data
(2) eap_peap: TLS_accept: SSLv3 read client certificate A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read
client key
exchange A
(2) eap_peap: TLS - In Handshake Phase
(2) eap_peap: TLS - got 2687 bytes of data
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 166 length 1004
(2) eap: EAP session adding &reply:State = 0x06df9fcc047986aa
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(2) Sent Access-Challenge Id 27 from 172.16.0.100:1812 to
172.100.0.60:49947 length
0
(2)   EAP-Message =
0x01a603ec19c000000a7f16030100370200003303011069fa543cddfebbc2
a59de247700b31bea216c1570e4080444f574e4752440000c01400000bff01
000100000b0002010016030108e50b0008e10008de0003e8308203e4308202
cca003020102020101300d06092a864886f70d01010b0500308196310b3009
060355040613025452310e300c06035504080c05495a4d4952310d300b0603
5504070c0455524c4131173015060355040a0c0e5061727461204e6574776f
726b733120301e06092a864886f70d0109011611696e666f4070617274612e
636f6d2e7472312d302b06035504030c245061727461204e6574776f726b73
20436572746966696361746520417574686f72697479301e170d3230303333
313131323930385a170d3330303332393131323930385a308182310b300906
0355040613025452310e300c06035504080c05495a4d495231173015060355
040a0c0e5061727461204e6574776f726b733128302606035504030c1f506172746120
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x06df9fcc047986aa43639075ca7d333a
(2) Finished request
Waking up in 4.7 seconds.
(3) Received Access-Request Id 28 from 172.100.0.60:49947 to
172.16.0.100:1812 length 340
(3)   User-Name = "mypc-pc\\Administrator"
(3)   NAS-Port = 20497
(3)   Service-Type = Framed-User
(3)   Framed-Protocol = PPP
(3)   Calling-Station-Id = "44a8-42f7-952d"
(3)   NAS-Identifier = "S5735_K6_SW1"
(3)   NAS-Port-Type = Ethernet
(3)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(3)   State = 0x06df9fcc047986aa43639075ca7d333a
(3)   EAP-Message = 0x02a600061900
(3)   Message-Authenticator = 0xcc4d6c36e5459879cc826325ec4d747a
(3)   Called-Station-Id = "44-67-47-26-F7-90"
(3)   Login-IP-Host = 0.0.0.0
(3)   NAS-IP-Address = 172.100.0.60
(3)   Framed-MTU = 1500
(3)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(3)   Huawei-Startup-Stamp = 1589932873
(3)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(3)   Huawei-Connect-ID = 45
(3)   Huawei-Version = "Huawei S5735"
(3)   Huawei-Product-ID = "S5735"
(3)   Huawei-User-Mac = "\000\000\000\001"
(3)   Huawei-Domain-Name = "default"
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(3)   authorize {
(3)     update {
(3)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(3)       EXPAND --username=%{User-Name}
(3)          --> --username=mypc-pc\\Administrator
(3)       EXPAND --calledStationID=%{Called-Station-Id}
(3)          --> --calledStationID=44-67-47-26-F7-90
(3)       EXPAND --callingStationID=%{Calling-Station-Id}
(3)          --> --callingStationID=44a8-42f7-952d
(3)       EXPAND --connectInfo=%{Connect-Info}
(3)          --> --connectInfo=
(3)       EXPAND --framedMTU=%{Framed-MTU}
(3)          --> --framedMTU=1500
(3)       EXPAND --framedProtocol=%{Framed-Protocol}
(3)          --> --framedProtocol=PPP
(3)       EXPAND --nasIdentifier=%{NAS-Identifier}
(3)          --> --nasIdentifier=S5735_K6_SW1
(3)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(3)          --> --nasIPAddress=172.100.0.60
(3)       EXPAND --nasPort=%{NAS-Port}
(3)          --> --nasPort=20497
(3)       EXPAND --nasPortID=%{NAS-Port-Id}
(3)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(3)       EXPAND --nasPortType=%{NAS-Port-Type}
(3)          --> --nasPortType=Ethernet
(3)       EXPAND --serviceType=%{Service-Type}
(3)          --> --serviceType=Framed-User
(3)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(3)          --> --tunnelMediumType=
(3)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(3)          --> --tunnelPrivateGroupID=
(3)       EXPAND --tunnelType=%{Tunnel-Type}
(3)          --> --tunnelType=
(3)       Program returned code (0) and output 'Reply-Message :=""'
(3)       control::Reply-Message :=
(3)     } # update = noop
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = noop
(3)     } # policy filter_username = noop
(3)     [preprocess] = ok
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 166 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x06df9fcc047986aa
(3) eap: Finished EAP session with state 0x06df9fcc047986aa
(3) eap: Previous EAP request found for state
0x06df9fcc047986aa, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 167 length 1000
(3) eap: EAP session adding &reply:State = 0x06df9fcc057886aa
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found.  Ignoring.
(3) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(3) Sent Access-Challenge Id 28 from 172.16.0.100:1812 to
172.100.0.60:49947 length
0
(3)   EAP-Message =
0x01a703e81940a73b4534fb54764797d56b51f469ff2e5a5feaf506057dbd
fd6af543dfe986febe19c807b89244404cb9503c4a449efd5e8a9e68f31f0f
a9b20107d112dde99fabadb55f609fefb8f0cfb09e1bb696330c0004f03082
04ec308203d4a0030201020209008917e4729c9d3b3d300d06092a864886f7
0d01010b0500308196310b3009060355040613025452310e300c0603550408
0c05495a4d4952310d300b06035504070c0455524c4131173015060355040a
0c0e5061727461204e6574776f726b733120301e06092a864886f70d010901
1611696e666f4070617274612e636f6d2e7472312d302b06035504030c2450
61727461204e6574776f726b7320436572746966696361746520417574686f
72697479301e170d3230303333313131323930385a170d3330303332393131
323930385a308196310b3009060355040613025452310e300c06035504080c
05495a4d4952310d300b06035504070c0455524c4131173015060355040a0c0e506172
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x06df9fcc057886aa43639075ca7d333a
(3) Finished request
Waking up in 4.7 seconds.
(4) Received Access-Request Id 29 from 172.100.0.60:49947 to
172.16.0.100:1812 length 340
(4)   User-Name = "mypc-pc\\Administrator"
(4)   NAS-Port = 20497
(4)   Service-Type = Framed-User
(4)   Framed-Protocol = PPP
(4)   Calling-Station-Id = "44a8-42f7-952d"
(4)   NAS-Identifier = "S5735_K6_SW1"
(4)   NAS-Port-Type = Ethernet
(4)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(4)   State = 0x06df9fcc057886aa43639075ca7d333a
(4)   EAP-Message = 0x02a700061900
(4)   Message-Authenticator = 0x345bff17c216eb76264d2dd1836dced4
(4)   Called-Station-Id = "44-67-47-26-F7-90"
(4)   Login-IP-Host = 0.0.0.0
(4)   NAS-IP-Address = 172.100.0.60
(4)   Framed-MTU = 1500
(4)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(4)   Huawei-Startup-Stamp = 1589932873
(4)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(4)   Huawei-Connect-ID = 45
(4)   Huawei-Version = "Huawei S5735"
(4)   Huawei-Product-ID = "S5735"
(4)   Huawei-User-Mac = "\000\000\000\001"
(4)   Huawei-Domain-Name = "default"
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(4)   authorize {
(4)     update {
(4)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(4)       EXPAND --username=%{User-Name}
(4)          --> --username=mypc-pc\\Administrator
(4)       EXPAND --calledStationID=%{Called-Station-Id}
(4)          --> --calledStationID=44-67-47-26-F7-90
(4)       EXPAND --callingStationID=%{Calling-Station-Id}
(4)          --> --callingStationID=44a8-42f7-952d
(4)       EXPAND --connectInfo=%{Connect-Info}
(4)          --> --connectInfo=
(4)       EXPAND --framedMTU=%{Framed-MTU}
(4)          --> --framedMTU=1500
(4)       EXPAND --framedProtocol=%{Framed-Protocol}
(4)          --> --framedProtocol=PPP
(4)       EXPAND --nasIdentifier=%{NAS-Identifier}
(4)          --> --nasIdentifier=S5735_K6_SW1
(4)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(4)          --> --nasIPAddress=172.100.0.60
(4)       EXPAND --nasPort=%{NAS-Port}
(4)          --> --nasPort=20497
(4)       EXPAND --nasPortID=%{NAS-Port-Id}
(4)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(4)       EXPAND --nasPortType=%{NAS-Port-Type}
(4)          --> --nasPortType=Ethernet
(4)       EXPAND --serviceType=%{Service-Type}
(4)          --> --serviceType=Framed-User
(4)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(4)          --> --tunnelMediumType=
(4)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(4)          --> --tunnelPrivateGroupID=
(4)       EXPAND --tunnelType=%{Tunnel-Type}
(4)          --> --tunnelType=
(4)       Program returned code (0) and output 'Reply-Message :=""'
(4)       control::Reply-Message :=
(4)     } # update = noop
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = noop
(4)     } # policy filter_username = noop
(4)     [preprocess] = ok
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 167 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x06df9fcc057886aa
(4) eap: Finished EAP session with state 0x06df9fcc057886aa
(4) eap: Previous EAP request found for state
0x06df9fcc057886aa, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 168 length 705
(4) eap: EAP session adding &reply:State = 0x06df9fcc027786aa
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found.  Ignoring.
(4) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(4) Sent Access-Challenge Id 29 from 172.16.0.100:1812 to
172.100.0.60:49947 length
0
(4)   EAP-Message =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(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x06df9fcc027786aa43639075ca7d333a
(4) Finished request
Waking up in 4.6 seconds.
(5) Received Access-Request Id 30 from 172.100.0.60:49947 to
172.16.0.100:1812 length 478
(5)   User-Name = "mypc-pc\\Administrator"
(5)   NAS-Port = 20497
(5)   Service-Type = Framed-User
(5)   Framed-Protocol = PPP
(5)   Calling-Station-Id = "44a8-42f7-952d"
(5)   NAS-Identifier = "S5735_K6_SW1"
(5)   NAS-Port-Type = Ethernet
(5)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(5)   State = 0x06df9fcc027786aa43639075ca7d333a
(5)   EAP-Message =
0x02a800901980000000861603010046100000424104c7b577ecf031abd558
556c730dea6a62961ef24e63b87df106b9981a6899f04e68a480a2b306f8f1
99787ac538d19bc572f82e277133f9ebbdbd8b3b4d17866e14030100010116
030100301e14570b074715b54215c474e30f4ab9f9bfadb1590f0331598dae
f254ac64514ddef71c035306cdc1fea1cbdd58dcce
(5)   Message-Authenticator = 0x68db217c9425678c6ba8dba10a9679e9
(5)   Called-Station-Id = "44-67-47-26-F7-90"
(5)   Login-IP-Host = 0.0.0.0
(5)   NAS-IP-Address = 172.100.0.60
(5)   Framed-MTU = 1500
(5)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(5)   Huawei-Startup-Stamp = 1589932873
(5)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(5)   Huawei-Connect-ID = 45
(5)   Huawei-Version = "Huawei S5735"
(5)   Huawei-Product-ID = "S5735"
(5)   Huawei-User-Mac = "\000\000\000\001"
(5)   Huawei-Domain-Name = "default"
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(5)   authorize {
(5)     update {
(5)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(5)       EXPAND --username=%{User-Name}
(5)          --> --username=mypc-pc\\Administrator
(5)       EXPAND --calledStationID=%{Called-Station-Id}
(5)          --> --calledStationID=44-67-47-26-F7-90
(5)       EXPAND --callingStationID=%{Calling-Station-Id}
(5)          --> --callingStationID=44a8-42f7-952d
(5)       EXPAND --connectInfo=%{Connect-Info}
(5)          --> --connectInfo=
(5)       EXPAND --framedMTU=%{Framed-MTU}
(5)          --> --framedMTU=1500
(5)       EXPAND --framedProtocol=%{Framed-Protocol}
(5)          --> --framedProtocol=PPP
(5)       EXPAND --nasIdentifier=%{NAS-Identifier}
(5)          --> --nasIdentifier=S5735_K6_SW1
(5)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(5)          --> --nasIPAddress=172.100.0.60
(5)       EXPAND --nasPort=%{NAS-Port}
(5)          --> --nasPort=20497
(5)       EXPAND --nasPortID=%{NAS-Port-Id}
(5)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(5)       EXPAND --nasPortType=%{NAS-Port-Type}
(5)          --> --nasPortType=Ethernet
(5)       EXPAND --serviceType=%{Service-Type}
(5)          --> --serviceType=Framed-User
(5)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(5)          --> --tunnelMediumType=
(5)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(5)          --> --tunnelPrivateGroupID=
(5)       EXPAND --tunnelType=%{Tunnel-Type}
(5)          --> --tunnelType=
(5)       Program returned code (0) and output 'Reply-Message :=""'
(5)       control::Reply-Message :=
(5)     } # update = noop
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = noop
(5)     } # policy filter_username = noop
(5)     [preprocess] = ok
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 168 length 144
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x06df9fcc027786aa
(5) eap: Finished EAP session with state 0x06df9fcc027786aa
(5) eap: Previous EAP request found for state
0x06df9fcc027786aa, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be
134 bytes
(5) eap_peap: Got complete TLS record (134 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046],
ClientKeyExchange
(5) eap_peap: TLS_accept: SSLv3 read client key exchange A
(5) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap: TLS_accept: SSLv3 read finished A
(5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap: TLS_accept: SSLv3 write change cipher spec A
(5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap: TLS_accept: SSLv3 write finished A
(5) eap_peap: TLS_accept: SSLv3 flush data
(5) eap_peap: (other): SSL negotiation finished successfully
(5) eap_peap: TLS - Connection Established
(5) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA"
(5) eap_peap: TLS-Session-Version = "TLS 1.0"
(5) eap_peap: TLS - got 59 bytes of data
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 169 length 65
(5) eap: EAP session adding &reply:State = 0x06df9fcc037686aa
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found.  Ignoring.
(5) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(5) session-state: Saving cached attributes
(5)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA"
(5)   TLS-Session-Version = "TLS 1.0"
(5) Sent Access-Challenge Id 30 from 172.16.0.100:1812 to
172.100.0.60:49947 length
0
(5)   EAP-Message =
0x01a90041190014030100010116030100302fe125fbf82aa49c3614c980ad
be6cec3d9fcfee716e1ad42f33b3e8d99e997248e974d389d973a61f8d6f2facc5e492
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x06df9fcc037686aa43639075ca7d333a
(5) Finished request
Waking up in 4.6 seconds.
(6) Received Access-Request Id 31 from 172.100.0.60:49947 to
172.16.0.100:1812 length 340
(6)   User-Name = "mypc-pc\\Administrator"
(6)   NAS-Port = 20497
(6)   Service-Type = Framed-User
(6)   Framed-Protocol = PPP
(6)   Calling-Station-Id = "44a8-42f7-952d"
(6)   NAS-Identifier = "S5735_K6_SW1"
(6)   NAS-Port-Type = Ethernet
(6)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(6)   State = 0x06df9fcc037686aa43639075ca7d333a
(6)   EAP-Message = 0x02a900061900
(6)   Message-Authenticator = 0x6eae2e14353af6bdf3490d21f430dfbe
(6)   Called-Station-Id = "44-67-47-26-F7-90"
(6)   Login-IP-Host = 0.0.0.0
(6)   NAS-IP-Address = 172.100.0.60
(6)   Framed-MTU = 1500
(6)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(6)   Huawei-Startup-Stamp = 1589932873
(6)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(6)   Huawei-Connect-ID = 45
(6)   Huawei-Version = "Huawei S5735"
(6)   Huawei-Product-ID = "S5735"
(6)   Huawei-User-Mac = "\000\000\000\001"
(6)   Huawei-Domain-Name = "default"
(6) Restoring &session-state
(6)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA"
(6)   &session-state:TLS-Session-Version = "TLS 1.0"
(6) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(6)   authorize {
(6)     update {
(6)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(6)       EXPAND --username=%{User-Name}
(6)          --> --username=mypc-pc\\Administrator
(6)       EXPAND --calledStationID=%{Called-Station-Id}
(6)          --> --calledStationID=44-67-47-26-F7-90
(6)       EXPAND --callingStationID=%{Calling-Station-Id}
(6)          --> --callingStationID=44a8-42f7-952d
(6)       EXPAND --connectInfo=%{Connect-Info}
(6)          --> --connectInfo=
(6)       EXPAND --framedMTU=%{Framed-MTU}
(6)          --> --framedMTU=1500
(6)       EXPAND --framedProtocol=%{Framed-Protocol}
(6)          --> --framedProtocol=PPP
(6)       EXPAND --nasIdentifier=%{NAS-Identifier}
(6)          --> --nasIdentifier=S5735_K6_SW1
(6)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(6)          --> --nasIPAddress=172.100.0.60
(6)       EXPAND --nasPort=%{NAS-Port}
(6)          --> --nasPort=20497
(6)       EXPAND --nasPortID=%{NAS-Port-Id}
(6)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(6)       EXPAND --nasPortType=%{NAS-Port-Type}
(6)          --> --nasPortType=Ethernet
(6)       EXPAND --serviceType=%{Service-Type}
(6)          --> --serviceType=Framed-User
(6)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(6)          --> --tunnelMediumType=
(6)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(6)          --> --tunnelPrivateGroupID=
(6)       EXPAND --tunnelType=%{Tunnel-Type}
(6)          --> --tunnelType=
(6)       Program returned code (0) and output 'Reply-Message :=""'
(6)       control::Reply-Message :=
(6)     } # update = noop
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = noop
(6)     } # policy filter_username = noop
(6)     [preprocess] = ok
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 169 length 6
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x06df9fcc037686aa
(6) eap: Finished EAP session with state 0x06df9fcc037686aa
(6) eap: Previous EAP request found for state
0x06df9fcc037686aa, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment.  handshake
is finished
(6) eap_peap: [eaptls verify] = success
(6) eap_peap: [eaptls process] = success
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state TUNNEL ESTABLISHED
(6) eap: Sending EAP Request (code 1) ID 170 length 43
(6) eap: EAP session adding &reply:State = 0x06df9fcc007586aa
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found.  Ignoring.
(6) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(6) session-state: Saving cached attributes
(6)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA"
(6)   TLS-Session-Version = "TLS 1.0"
(6) Sent Access-Challenge Id 31 from 172.16.0.100:1812 to
172.100.0.60:49947 length
0
(6)   EAP-Message =
0x01aa002b1900170301002039839b1c2d3257209fb27a7353e9e75e31a406
708676f7c33e1183170f61d947
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x06df9fcc007586aa43639075ca7d333a
(6) Finished request
Waking up in 4.5 seconds.
(7) Received Access-Request Id 32 from 172.100.0.60:49947 to
172.16.0.100:1812 length 393
(7)   User-Name = "mypc-pc\\Administrator"
(7)   NAS-Port = 20497
(7)   Service-Type = Framed-User
(7)   Framed-Protocol = PPP
(7)   Calling-Station-Id = "44a8-42f7-952d"
(7)   NAS-Identifier = "S5735_K6_SW1"
(7)   NAS-Port-Type = Ethernet
(7)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(7)   State = 0x06df9fcc007586aa43639075ca7d333a
(7)   EAP-Message =
0x02aa003b190017030100303d5c35ae730f2e2172de89948e051cb0b22703
3be363ddea1c384cc141c1593d7ed0251c4ca849138cfdebf0e810852a
(7)   Message-Authenticator = 0x1a8ae85940fcefdcbc7a0528828a0c77
(7)   Called-Station-Id = "44-67-47-26-F7-90"
(7)   Login-IP-Host = 0.0.0.0
(7)   NAS-IP-Address = 172.100.0.60
(7)   Framed-MTU = 1500
(7)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(7)   Huawei-Startup-Stamp = 1589932873
(7)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(7)   Huawei-Connect-ID = 45
(7)   Huawei-Version = "Huawei S5735"
(7)   Huawei-Product-ID = "S5735"
(7)   Huawei-User-Mac = "\000\000\000\001"
(7)   Huawei-Domain-Name = "default"
(7) Restoring &session-state
(7)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA"
(7)   &session-state:TLS-Session-Version = "TLS 1.0"
(7) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(7)   authorize {
(7)     update {
(7)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(7)       EXPAND --username=%{User-Name}
(7)          --> --username=mypc-pc\\Administrator
(7)       EXPAND --calledStationID=%{Called-Station-Id}
(7)          --> --calledStationID=44-67-47-26-F7-90
(7)       EXPAND --callingStationID=%{Calling-Station-Id}
(7)          --> --callingStationID=44a8-42f7-952d
(7)       EXPAND --connectInfo=%{Connect-Info}
(7)          --> --connectInfo=
(7)       EXPAND --framedMTU=%{Framed-MTU}
(7)          --> --framedMTU=1500
(7)       EXPAND --framedProtocol=%{Framed-Protocol}
(7)          --> --framedProtocol=PPP
(7)       EXPAND --nasIdentifier=%{NAS-Identifier}
(7)          --> --nasIdentifier=S5735_K6_SW1
(7)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(7)          --> --nasIPAddress=172.100.0.60
(7)       EXPAND --nasPort=%{NAS-Port}
(7)          --> --nasPort=20497
(7)       EXPAND --nasPortID=%{NAS-Port-Id}
(7)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(7)       EXPAND --nasPortType=%{NAS-Port-Type}
(7)          --> --nasPortType=Ethernet
(7)       EXPAND --serviceType=%{Service-Type}
(7)          --> --serviceType=Framed-User
(7)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(7)          --> --tunnelMediumType=
(7)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(7)          --> --tunnelPrivateGroupID=
(7)       EXPAND --tunnelType=%{Tunnel-Type}
(7)          --> --tunnelType=
(7)       Program returned code (0) and output 'Reply-Message :=""'
(7)       control::Reply-Message :=
(7)     } # update = noop
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = noop
(7)     } # policy filter_username = noop
(7)     [preprocess] = ok
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 170 length 59
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x06df9fcc007586aa
(7) eap: Finished EAP session with state 0x06df9fcc007586aa
(7) eap: Previous EAP request found for state
0x06df9fcc007586aa, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(7) eap_peap: Identity - mypc-pc\Administrator
(7) eap_peap: Got inner identity 'mypc-pc\Administrator'
(7) eap_peap: Setting default EAP type for tunneled EAP session
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message =
0x02aa001c01626c6774656b2d70635c41646d696e6973747261746f72
(7) eap_peap: Setting User-Name to mypc-pc\Administrator
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message =
0x02aa001c01626c6774656b2d70635c41646d696e6973747261746f72
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "mypc-pc\\Administrator"
(7) Virtual server inner-tunnel received request
(7)   EAP-Message =
0x02aa001c01626c6774656b2d70635c41646d696e6973747261746f72
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "mypc-pc\\Administrator"
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/inner-tunnel
(7)     authorize {
(7)       update {
(7)         Executing: /mydir/sbin/myprog-nac
--username='%{User-Name}'
--verify=true --control=false:
(7)         EXPAND --username=%{User-Name}
(7)            --> --username=mypc-pc\\Administrator
(7)         Program returned code (0) and output
'Idle-Timeout := "30"'
(7)         reply::Idle-Timeout := 30
(7)       } # update = noop
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))
-> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = noop
(7)       } # policy filter_username = noop
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 170 length 28
(7) eap: EAP-Identity reply, returning 'ok' so we can
short-circuit the
rest of authorize
(7)       [eap] = ok
(7)       [files] = noop
(7)       [expiration] = noop
(7)       [logintime] = noop
(7)       [pap] = noop
(7)     } # authorize = ok
(7)   Found Auth-Type = eap
(7)   # Executing group from file
/mydir/etc/raddb/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Peer sent packet with method EAP Identity (1)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: Issuing Challenge
(7) eap: Sending EAP Request (code 1) ID 171 length 43
(7) eap: EAP session adding &reply:State = 0xb29197b0b23a8d1a
(7)       [eap] = handled
(7)     } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   Idle-Timeout := 30
(7)   EAP-Message =
0x01ab002b1a01ab00261007ecd1ba566d66c76e7aa95ce127214b66726565
7261646975732d332e302e3231
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xb29197b0b23a8d1abd34b414c2a4601c
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap:   Idle-Timeout := 30
(7) eap_peap:   EAP-Message =
0x01ab002b1a01ab00261007ecd1ba566d66c76e7aa95ce127214b66726565
7261646975732d332e302e3231
(7) eap_peap:   Message-Authenticator =
0x00000000000000000000000000000000
(7) eap_peap:   State = 0xb29197b0b23a8d1abd34b414c2a4601c
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap:   Idle-Timeout := 30
(7) eap_peap:   EAP-Message =
0x01ab002b1a01ab00261007ecd1ba566d66c76e7aa95ce127214b66726565
7261646975732d332e302e3231
(7) eap_peap:   Message-Authenticator =
0x00000000000000000000000000000000
(7) eap_peap:   State = 0xb29197b0b23a8d1abd34b414c2a4601c
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 171 length 75
(7) eap: EAP session adding &reply:State = 0x06df9fcc017486aa
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found.  Ignoring.
(7) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(7) session-state: Saving cached attributes
(7)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA"
(7)   TLS-Session-Version = "TLS 1.0"
(7) Sent Access-Challenge Id 32 from 172.16.0.100:1812 to
172.100.0.60:49947 length
0
(7)   EAP-Message =
0x01ab004b19001703010040f117bdd7e2a2d6530a0eebaac5f17a0b3e5846
e1278f4367eeb28499b7d4f60485adaa834a12a2f5fc22b2e4a7b75b2fd584
277bbb9e717bf568d0b7c39b9b21
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x06df9fcc017486aa43639075ca7d333a
(7) Finished request
Waking up in 4.5 seconds.
(8) Received Access-Request Id 33 from 172.100.0.60:49947 to
172.16.0.100:1812 length 441
(8)   User-Name = "mypc-pc\\Administrator"
(8)   NAS-Port = 20497
(8)   Service-Type = Framed-User
(8)   Framed-Protocol = PPP
(8)   Calling-Station-Id = "44a8-42f7-952d"
(8)   NAS-Identifier = "S5735_K6_SW1"
(8)   NAS-Port-Type = Ethernet
(8)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(8)   State = 0x06df9fcc017486aa43639075ca7d333a
(8)   EAP-Message =
0x02ab006b1900170301006030a260cec76b817616c8446e917733d195ea67
fcb4cba7ea0c15873eccb189ac0c0482c8d146ae81eaf880b90364036ca514
b87389987c4879b1e21d8c032b74a3adf543509c62b5cc1e85d7f556043d22
e8f68156c08b94226c0358519793f0
(8)   Message-Authenticator = 0x99f47b6e04e6c7df9ba0bad3ad23a0dc
(8)   Called-Station-Id = "44-67-47-26-F7-90"
(8)   Login-IP-Host = 0.0.0.0
(8)   NAS-IP-Address = 172.100.0.60
(8)   Framed-MTU = 1500
(8)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(8)   Huawei-Startup-Stamp = 1589932873
(8)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(8)   Huawei-Connect-ID = 45
(8)   Huawei-Version = "Huawei S5735"
(8)   Huawei-Product-ID = "S5735"
(8)   Huawei-User-Mac = "\000\000\000\001"
(8)   Huawei-Domain-Name = "default"
(8) Restoring &session-state
(8)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA"
(8)   &session-state:TLS-Session-Version = "TLS 1.0"
(8) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(8)   authorize {
(8)     update {
(8)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(8)       EXPAND --username=%{User-Name}
(8)          --> --username=mypc-pc\\Administrator
(8)       EXPAND --calledStationID=%{Called-Station-Id}
(8)          --> --calledStationID=44-67-47-26-F7-90
(8)       EXPAND --callingStationID=%{Calling-Station-Id}
(8)          --> --callingStationID=44a8-42f7-952d
(8)       EXPAND --connectInfo=%{Connect-Info}
(8)          --> --connectInfo=
(8)       EXPAND --framedMTU=%{Framed-MTU}
(8)          --> --framedMTU=1500
(8)       EXPAND --framedProtocol=%{Framed-Protocol}
(8)          --> --framedProtocol=PPP
(8)       EXPAND --nasIdentifier=%{NAS-Identifier}
(8)          --> --nasIdentifier=S5735_K6_SW1
(8)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(8)          --> --nasIPAddress=172.100.0.60
(8)       EXPAND --nasPort=%{NAS-Port}
(8)          --> --nasPort=20497
(8)       EXPAND --nasPortID=%{NAS-Port-Id}
(8)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(8)       EXPAND --nasPortType=%{NAS-Port-Type}
(8)          --> --nasPortType=Ethernet
(8)       EXPAND --serviceType=%{Service-Type}
(8)          --> --serviceType=Framed-User
(8)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(8)          --> --tunnelMediumType=
(8)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(8)          --> --tunnelPrivateGroupID=
(8)       EXPAND --tunnelType=%{Tunnel-Type}
(8)          --> --tunnelType=
(8)       Program returned code (0) and output 'Reply-Message :=""'
(8)       control::Reply-Message :=
(8)     } # update = noop
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = noop
(8)     } # policy filter_username = noop
(8)     [preprocess] = ok
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 171 length 107
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0xb29197b0b23a8d1a
(8) eap: Finished EAP session with state 0x06df9fcc017486aa
(8) eap: Previous EAP request found for state
0x06df9fcc017486aa, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap:   EAP-Message =
0x02ab00481a02ab00433195ac524fdd05d06d75f4001a40fbac5f00000000
00000000a380d06457734f2b4a8f544de51831e2a54853305befeb55004164
6d696e6973747261746f72
(8) eap_peap: Setting User-Name to mypc-pc\Administrator
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap:   EAP-Message =
0x02ab00481a02ab00433195ac524fdd05d06d75f4001a40fbac5f00000000
00000000a380d06457734f2b4a8f544de51831e2a54853305befeb55004164
6d696e6973747261746f72
(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap:   User-Name = "mypc-pc\\Administrator"
(8) eap_peap:   State = 0xb29197b0b23a8d1abd34b414c2a4601c
(8) Virtual server inner-tunnel received request
(8)   EAP-Message =
0x02ab00481a02ab00433195ac524fdd05d06d75f4001a40fbac5f00000000
00000000a380d06457734f2b4a8f544de51831e2a54853305befeb55004164
6d696e6973747261746f72
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "mypc-pc\\Administrator"
(8)   State = 0xb29197b0b23a8d1abd34b414c2a4601c
(8) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(8) server inner-tunnel {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/inner-tunnel
(8)     authorize {
(8)       update {
(8)         Executing: /mydir/sbin/myprog-nac
--username='%{User-Name}'
--verify=true --control=false:
(8)         EXPAND --username=%{User-Name}
(8)            --> --username=mypc-pc\\Administrator
(8)         Program returned code (0) and output
'Idle-Timeout := "30"'
(8)         reply::Idle-Timeout := 30
(8)       } # update = noop
(8)       policy filter_username {
(8)         if (&User-Name) {
(8)         if (&User-Name)  -> TRUE
(8)         if (&User-Name)  {
(8)           if (&User-Name =~ / /) {
(8)           if (&User-Name =~ / /)  -> FALSE
(8)           if (&User-Name =~ /@[^@]*@/ ) {
(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)           if (&User-Name =~ /\.\./ ) {
(8)           if (&User-Name =~ /\.\./ )  -> FALSE
(8)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(8)           if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))
-> FALSE
(8)           if (&User-Name =~ /\.$/)  {
(8)           if (&User-Name =~ /\.$/)   -> FALSE
(8)           if (&User-Name =~ /@\./)  {
(8)           if (&User-Name =~ /@\./)   -> FALSE
(8)         } # if (&User-Name)  = noop
(8)       } # policy filter_username = noop
(8)       [chap] = noop
(8)       [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(8) suffix: No such realm "NULL"
(8)       [suffix] = noop
(8)       update control {
(8)         &Proxy-To-Realm := LOCAL
(8)       } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 171 length 72
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8)       [files] = noop
(8)       [expiration] = noop
(8)       [logintime] = noop
(8)       [pap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = eap
(8)   # Executing group from file
/mydir/etc/raddb/sites-enabled/inner-tunnel
(8)     authenticate {
(8) eap: Expiring EAP session with state 0xb29197b0b23a8d1a
(8) eap: Finished EAP session with state 0xb29197b0b23a8d1a
(8) eap: Previous EAP request found for state
0xb29197b0b23a8d1a, released
from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: # Executing group from file
/mydir/etc/raddb/sites-enabled/inner-tunnel
(8) eap_mschapv2:   authenticate {
(8) mschap: WARNING: User-Name (mypc-pc\Administrator) is not
the same as
MS-CHAP Name (Administrator) from EAP-MSCHAPv2
(8) mschap: Creating challenge hash with username: Administrator
(8) mschap: Client is using MS-CHAPv2
(8) mschap: Executing: /usr/local/bin/ntlm_auth  --request-nt-key
--username=%{%{mschap:User-Name}:-00}
--challenge=%{%{mschap:Challenge}:-00}
--nt-response=%{%{mschap:NT-Response}:-00}:
(8) mschap: EXPAND --username=%{%{mschap:User-Name}:-00}
(8) mschap:    --> --username=Administrator
(8) mschap: WARNING: User-Name (mypc-pc\Administrator) is not
the same as
MS-CHAP Name (Administrator) from EAP-MSCHAPv2
(8) mschap: Creating challenge hash with username: Administrator
(8) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00}
(8) mschap:    --> --challenge=54f8ede55f4a4abb
(8) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00}
(8) mschap:    -->
--nt-response=a380d06457734f2b4a8f544de51831e2a54853305befeb55
(8) mschap: ERROR: Program returned code (1) and output
'Reading winbind
reply failed! (0xc0000001)'
(8) mschap: ERROR: Reading winbind reply failed! (0xc0000001)
(8) mschap: Authentication failed
(8) eap_mschapv2:     [mschap] = fail
(8) eap_mschapv2:   } # authenticate = fail
(8) eap: Sending EAP Failure (code 4) ID 171 length 4
(8) eap: Freeing handler
(8)       [eap] = reject
(8)     } # authenticate = reject
(8)   Failed to authenticate the user
(8)   Using Post-Auth-Type Reject
(8)   # Executing group from file
/mydir/etc/raddb/sites-enabled/inner-tunnel
(8)     Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject:    --> mypc-pc\\Administrator
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8)       [attr_filter.access_reject] = updated
(8)       update outer.session-state {
(8)         &Module-Failure-Message :=
&request:Module-Failure-Message ->
'mschap: Program returned code (1) and output \'Reading winbind reply
failed! (0xc0000001)\''
(8)       } # update outer.session-state = noop
(8)     } # Post-Auth-Type REJECT = updated
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8)   MS-CHAP-Error = "\253E=691 R=1
C=be33295ca3e819f0d59751ac4be850ab V=3
M=Authentication failed"
(8)   EAP-Message = 0x04ab0004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Got tunneled reply code 3
(8) eap_peap:   MS-CHAP-Error = "\253E=691 R=1
C=be33295ca3e819f0d59751ac4be850ab V=3 M=Authentication failed"
(8) eap_peap:   EAP-Message = 0x04ab0004
(8) eap_peap:   Message-Authenticator =
0x00000000000000000000000000000000
(8) eap_peap: Got tunneled reply RADIUS code 3
(8) eap_peap:   MS-CHAP-Error = "\253E=691 R=1
C=be33295ca3e819f0d59751ac4be850ab V=3 M=Authentication failed"
(8) eap_peap:   EAP-Message = 0x04ab0004
(8) eap_peap:   Message-Authenticator =
0x00000000000000000000000000000000
(8) eap_peap: Tunneled authentication was rejected
(8) eap_peap: FAILURE
(8) eap: Sending EAP Request (code 1) ID 172 length 43
(8) eap: EAP session adding &reply:State = 0x06df9fcc0e7386aa
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) Post-Auth-Type sub-section not found.  Ignoring.
(8) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(8) session-state: Saving cached attributes
(8)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA"
(8)   TLS-Session-Version = "TLS 1.0"
(8)   Module-Failure-Message := "mschap: Program returned code (1) and
output 'Reading winbind reply failed! (0xc0000001)'"
(8) Sent Access-Challenge Id 33 from 172.16.0.100:1812 to
172.100.0.60:49947 length
0
(8)   EAP-Message =
0x01ac002b1900170301002026931b104878a5280e9a66fdc3cfdebbdb1f82
46a377c0748067abbfc703e7f7
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x06df9fcc0e7386aa43639075ca7d333a
(8) Finished request
Waking up in 4.3 seconds.
(9) Received Access-Request Id 34 from 172.100.0.60:49947 to
172.16.0.100:1812 length 377
(9)   User-Name = "mypc-pc\\Administrator"
(9)   NAS-Port = 20497
(9)   Service-Type = Framed-User
(9)   Framed-Protocol = PPP
(9)   Calling-Station-Id = "44a8-42f7-952d"
(9)   NAS-Identifier = "S5735_K6_SW1"
(9)   NAS-Port-Type = Ethernet
(9)   NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17"
(9)   State = 0x06df9fcc0e7386aa43639075ca7d333a
(9)   EAP-Message =
0x02ac002b1900170301002002a19fd10d3999b09ff706b3c9a2e1b6f1de66
1047ec0e47760dd1c38e3479ce
(9)   Message-Authenticator = 0x9991289c6858191d73f190917ff6d23e
(9)   Called-Station-Id = "44-67-47-26-F7-90"
(9)   Login-IP-Host = 0.0.0.0
(9)   NAS-IP-Address = 172.100.0.60
(9)   Framed-MTU = 1500
(9)   Acct-Session-Id = "S5735_K00005000000017bcb85b000002d"
(9)   Huawei-Startup-Stamp = 1589932873
(9)   Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d"
(9)   Huawei-Connect-ID = 45
(9)   Huawei-Version = "Huawei S5735"
(9)   Huawei-Product-ID = "S5735"
(9)   Huawei-User-Mac = "\000\000\000\001"
(9)   Huawei-Domain-Name = "default"
(9) Restoring &session-state
(9)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA"
(9)   &session-state:TLS-Session-Version = "TLS 1.0"
(9)   &session-state:Module-Failure-Message := "mschap:
Program returned
code (1) and output 'Reading winbind reply failed! (0xc0000001)'"
(9) # Executing section authorize from file
/mydir/etc/raddb/sites-enabled/default
(9)   authorize {
(9)     update {
(9)       Executing: /mydir/sbin/myprog-nac --username='%{User-Name}'
--calledStationID='%{Called-Station-Id}'
--callingStationID='%{Calling-Station-Id}'
--connectInfo='%{Connect-Info}'
--framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}'
--nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}'
--nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}'
--nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}'
--tunnelMediumType='%{Tunnel-Medium-Type}'
--tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}'
--tunnelType='%{Tunnel-Type}'  --control=false --verify=false
--logging=true:
(9)       EXPAND --username=%{User-Name}
(9)          --> --username=mypc-pc\\Administrator
(9)       EXPAND --calledStationID=%{Called-Station-Id}
(9)          --> --calledStationID=44-67-47-26-F7-90
(9)       EXPAND --callingStationID=%{Calling-Station-Id}
(9)          --> --callingStationID=44a8-42f7-952d
(9)       EXPAND --connectInfo=%{Connect-Info}
(9)          --> --connectInfo=
(9)       EXPAND --framedMTU=%{Framed-MTU}
(9)          --> --framedMTU=1500
(9)       EXPAND --framedProtocol=%{Framed-Protocol}
(9)          --> --framedProtocol=PPP
(9)       EXPAND --nasIdentifier=%{NAS-Identifier}
(9)          --> --nasIdentifier=S5735_K6_SW1
(9)       EXPAND --nasIPAddress=%{NAS-IP-Address}
(9)          --> --nasIPAddress=172.100.0.60
(9)       EXPAND --nasPort=%{NAS-Port}
(9)          --> --nasPort=20497
(9)       EXPAND --nasPortID=%{NAS-Port-Id}
(9)          --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17
(9)       EXPAND --nasPortType=%{NAS-Port-Type}
(9)          --> --nasPortType=Ethernet
(9)       EXPAND --serviceType=%{Service-Type}
(9)          --> --serviceType=Framed-User
(9)       EXPAND --tunnelMediumType=%{Tunnel-Medium-Type}
(9)          --> --tunnelMediumType=
(9)       EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID}
(9)          --> --tunnelPrivateGroupID=
(9)       EXPAND --tunnelType=%{Tunnel-Type}
(9)          --> --tunnelType=
(9)       Program returned code (0) and output 'Reply-Message :=""'
(9)       control::Reply-Message :=
(9)     } # update = noop
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/))   ->
FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = noop
(9)     } # policy filter_username = noop
(9)     [preprocess] = ok
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "mypc-pc\Administrator",
looking up realm
NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 172 length 43
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(9)   authenticate {
(9) eap: Expiring EAP session with state 0x06df9fcc0e7386aa
(9) eap: Finished EAP session with state 0x06df9fcc0e7386aa
(9) eap: Previous EAP request found for state
0x06df9fcc0e7386aa, released
from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established.  Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv failure
(9) eap_peap: Received EAP-TLV response
(9) eap_peap:   ERROR: The users session was previously
rejected: returning
reject (again.)
(9) eap_peap:   This means you need to read the PREVIOUS
messages in the
debug output
(9) eap_peap:   to find out the reason why the user was rejected
(9) eap_peap:   Look for "reject" or "fail".  Those earlier
messages will
tell you
(9) eap_peap:   what went wrong, and how to fix the problem
(9) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP
sub-module
failed
(9) eap: Sending EAP Failure (code 4) ID 172 length 4
(9) eap: Failed in EAP select
(9)     [eap] = invalid
(9)   } # authenticate = invalid
(9) Failed to authenticate the user
(9) Using Post-Auth-Type Reject
(9) # Executing group from file /mydir/etc/raddb/sites-enabled/default
(9)   Post-Auth-Type REJECT {
(9) attr_filter.access_reject: EXPAND %{User-Name}
(9) attr_filter.access_reject:    --> mypc-pc\\Administrator
(9) attr_filter.access_reject: Matched entry DEFAULT at line 11
(9)     [attr_filter.access_reject] = updated
(9)     [eap] = noop
(9)     policy remove_reply_message_if_eap {
(9)       if (&reply:EAP-Message && &reply:Reply-Message) {
(9)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(9)       else {
(9)         [noop] = noop
(9)       } # else = noop
(9)     } # policy remove_reply_message_if_eap = noop
(9)   } # Post-Auth-Type REJECT = updated
(9) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(9) Sending delayed response
(9) Sent Access-Reject Id 34 from 172.16.0.100:1812 to
172.100.0.60:49947 length
44
(9)   EAP-Message = 0x04ac0004
(9)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.3 seconds.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html