RE: Authentication issues

21 Jun 2022

      Hello,

I am still getting eap-tls authentication issues. I am using the same certificates as our old radius server (which is running fine, just very old now). What am I doing wrong? I've looked at the debug log all morning and can't figure it out.

Kind regards,

David le Roux

ATTACHED RADIUS.LOG EXTRACT

Mon Jun 20 20:07:11 2022 : Auth: tls: Certificate CN (mh300649.millerextra.com) does not match specified value (host/mh300649.millerextra.com)!
Mon Jun 20 20:07:11 2022 : ERROR: (8) eap_tls: ERROR: TLS Alert write:fatal:internal error
Mon Jun 20 20:07:11 2022 : Error: tls: TLS_accept: Error in error

ATTACHED DEBUG LOG

Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including configuration file /etc/freeradius/3.0/mwanclients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/eap
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/mh-site
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 120
        cleanup_delay = 10
        max_requests = 80000
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####

...

Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
        filename = "/etc/freeradius/3.0/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loading module "authorized_macs" from file /etc/freeradius/3.0/mods-enabled/files
  files authorized_macs {
        usersfile = "/etc/freeradius/3.0/authorized_macs"
        key = "%{Calling-Station-ID}"
  }
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  realm bangpath {
        format = "prefix"
        delimiter = "!"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
        default_eap_type = "tls"
        timer_expire = 600
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 80000
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  instantiate {
  }
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "authorized_macs" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/authorized_macs
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/3.0/certs/millerCA/RADIUS_CA/"
        pem_file_type = yes
        private_key_file = "/etc/freeradius/3.0/certs/radius.millerextra.com.key"
        certificate_file = "/etc/freeradius/3.0/certs/radius.millerextra.com.pem"
        ca_file = "/etc/freeradius/3.0/certs/millerCA/RADIUS_CA/ca_and_crl.pem"
        dh_file = "/etc/freeradius/3.0/certs/dh"
        random_file = "/dev/urandom"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = yes
        check_all_crl = no
        check_cert_cn = "%{User-Name}"
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        check_cert_issuer = "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA"
        ecdh_curve = "prime256v1"
        tls_max_version = "1.2"
        tls_min_version = "1.2"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336
} # server inner-tunnel
server mh-site { # from file /etc/freeradius/3.0/sites-enabled/mh-site
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading post-proxy {...}
} # server mh-site
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
listen {
        type = "auth"
        ipaddr = 10.10.251.2
        port = 1812
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address 10.10.251.2 port 1812 bound to server mh-site
Listening on proxy address * port 33320
Ready to process requests
(1) Received Access-Request Id 0 from 10.225.186.1:55407 to 10.10.251.2:1812 length 306
(1)   User-Name = "host/mh300416.millerextra.com"
(1)   NAS-IP-Address = 0.0.0.0
(1)   NAS-Identifier = "E0-55-3D-8A-9A-D0:vap1"
(1)   Called-Station-Id = "E2-55-6D-8A-9A-D1:mhstaff"
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   Calling-Station-Id = "B4-B0-24-D4-DF-7E"
(1)   Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 48, Channel: 48"
(1)   Acct-Session-Id = "D574672A277DD053"
(1)   Acct-Multi-Session-Id = "7C418D59D18B05C5"
(1)   WLAN-Pairwise-Cipher = 1027076
(1)   WLAN-Group-Cipher = 1027076
(1)   WLAN-AKM-Suite = 1027073
(1)   Framed-MTU = 1400
(1)   EAP-Message = 0x02e3002201686f73742f6d683330303431362e6d696c6c657265787472612e636f6d
(1)   Message-Authenticator = 0x787944a8a1c6c210ccab0867ac99d70f
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1) eap: Peer sent EAP Response (code 2) ID 227 length 34
(1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site
(1)   authenticate {
(1) eap: Peer sent packet with method EAP Identity (1)
(1) eap: Calling submodule eap_tls to process data
(1) eap_tls: Initiating new TLS session
(1) eap_tls: Setting verify mode to require certificate from client
(1) eap_tls: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 228 length 6
(1) eap: EAP session adding &reply:State = 0x9aa27e309a467356
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) Sent Access-Challenge Id 0 from 10.10.251.2:1812 to 10.225.186.1:55407 length 0
(1)   EAP-Message = 0x01e400060d20
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x9aa27e309a467356d285c4b385eaaf56
(1) Finished request
Waking up in 9.9 seconds.
(2) Received Access-Request Id 1 from 10.225.186.1:55407 to 10.10.251.2:1812 length 456
(2)   User-Name = "host/mh300416.millerextra.com"
(2)   NAS-IP-Address = 0.0.0.0
(2)   NAS-Identifier = "E0-55-3D-8A-9A-D0:vap1"
(2)   Called-Station-Id = "E2-55-6D-8A-9A-D1:mhstaff"
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   Calling-Station-Id = "B4-B0-24-D4-DF-7E"
(2)   Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 48, Channel: 48"
(2)   Acct-Session-Id = "D574672A277DD053"
(2)   Acct-Multi-Session-Id = "7C418D59D18B05C5"
(2)   WLAN-Pairwise-Cipher = 1027076
(2)   WLAN-Group-Cipher = 1027076
(2)   WLAN-AKM-Suite = 1027073
(2)   Framed-MTU = 1400
(2)   EAP-Message = 0x02e400a60d800000009c160303009701000093030362b0c5b590cd2daed0060639396fe1729b9fa20792efe35d3a89d224e61952ea00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d00170018000b00020100000d001400120401050102010403050302030202060106030023000000170000ff01000100
(2)   State = 0x9aa27e309a467356d285c4b385eaaf56
(2)   Message-Authenticator = 0x547dbbe6b031745b3902f4c1890540e5
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2) eap: Peer sent EAP Response (code 2) ID 228 length 166
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2)     [eap] = updated
(2)     [files] = noop
(2)     [expiration] = noop
(2)     [logintime] = noop
(2)     policy rewrite_calling_station_id {
(2)       if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) {
(2)       if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))  -> TRUE
(2)       if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))  {
(2)         update request {
(2)           EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(2)              --> b4-b0-24-d4-df-7e
(2)           &Calling-Station-Id := b4-b0-24-d4-df-7e
(2)         } # update request = noop
(2)         [updated] = updated
(2)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))  = updated
(2)       ... skipping else: Preceding "if" was taken
(2)     } # policy rewrite_calling_station_id = updated
(2)     if (!EAP-Message) {
(2)     if (!EAP-Message)  -> FALSE
(2)     else {
(2) eap: Peer sent EAP Response (code 2) ID 228 length 166
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2)       [eap] = updated
(2)     } # else = updated
(2)   } # authorize = updated
(2) Found Auth-Type = eap
(2) Found Auth-Type = eap
(2) ERROR: Warning:  Found 2 auth-types on request for user 'host/mh300416.millerextra.com'
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x9aa27e309a467356
(2) eap: Finished EAP session with state 0x9aa27e309a467356
(2) eap: Previous EAP request found for state 0x9aa27e309a467356, released from the list
(2) eap: Peer sent packet with method EAP TLS (13)
(2) eap: Calling submodule eap_tls to process data
(2) eap_tls: Continuing EAP-TLS
(2) eap_tls: Peer indicated complete TLS record size will be 156 bytes
(2) eap_tls: Got complete TLS record (156 bytes)
(2) eap_tls: [eaptls verify] = length included
(2) eap_tls: (other): before SSL initialization
(2) eap_tls: TLS_accept: before SSL initialization
(2) eap_tls: TLS_accept: before SSL initialization
(2) eap_tls: <<< recv TLS 1.3  [length 0097]
(2) eap_tls: TLS_accept: SSLv3/TLS read client hello
(2) eap_tls: >>> send TLS 1.2  [length 003d]
(2) eap_tls: TLS_accept: SSLv3/TLS write server hello
(2) eap_tls: >>> send TLS 1.2  [length 0bd1]
(2) eap_tls: TLS_accept: SSLv3/TLS write certificate
(2) eap_tls: >>> send TLS 1.2  [length 00cd]
(2) eap_tls: TLS_accept: SSLv3/TLS write key exchange
(2) eap_tls: >>> send TLS 1.2  [length 00ed]
(2) eap_tls: TLS_accept: SSLv3/TLS write certificate request
(2) eap_tls: >>> send TLS 1.2  [length 0004]
(2) eap_tls: TLS_accept: SSLv3/TLS write server done
(2) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(2) eap_tls: TLS - In Handshake Phase
(2) eap_tls: TLS - got 3557 bytes of data
(2) eap_tls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 229 length 1004
(2) eap: EAP session adding &reply:State = 0x9aa27e309b477356
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) Sent Access-Challenge Id 1 from 10.10.251.2:1812 to 10.225.186.1:55407 length 0
(2)   EAP-Message = 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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x9aa27e309b477356d285c4b385eaaf56
(2) Finished request
Waking up in 9.6 seconds.
(8) Received Access-Request Id 7 from 10.225.186.1:55407 to 10.10.251.2:1812 length 603
(8)   User-Name = "host/mh300416.millerextra.com"
(8)   NAS-IP-Address = 0.0.0.0
(8)   NAS-Identifier = "E0-55-3D-8A-9A-D0:vap1"
(8)   Called-Station-Id = "E2-55-6D-8A-9A-D1:mhstaff"
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   Calling-Station-Id = "B4-B0-24-D4-DF-7E"
(8)   Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 47, Channel: 48"
(8)   Acct-Session-Id = "D574672A277DD053"
(8)   Acct-Multi-Session-Id = "7C418D59D18B05C5"
(8)   WLAN-Pairwise-Cipher = 1027076
(8)   WLAN-Group-Cipher = 1027076
(8)   WLAN-AKM-Suite = 1027073
(8)   Framed-MTU = 1400
(8)   EAP-Message = 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
(8)   State = 0x9aa27e309c487356d285c4b385eaaf56
(8)   Message-Authenticator = 0x8078b462fcf2db13ae497a3f33785060
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8) eap: Peer sent EAP Response (code 2) ID 234 length 311
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)     [eap] = updated
(8)     [files] = noop
(8)     [expiration] = noop
(8)     [logintime] = noop
(8)     policy rewrite_calling_station_id {
(8)       if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) {
(8)       if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))  -> TRUE
(8)       if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))  {
(8)         update request {
(8)           EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(8)              --> b4-b0-24-d4-df-7e
(8)           &Calling-Station-Id := b4-b0-24-d4-df-7e
(8)         } # update request = noop
(8)         [updated] = updated
(8)       } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))  = updated
(8)       ... skipping else: Preceding "if" was taken
(8)     } # policy rewrite_calling_station_id = updated
(8)     if (!EAP-Message) {
(8)     if (!EAP-Message)  -> FALSE
(8)     else {
(8) eap: Peer sent EAP Response (code 2) ID 234 length 311
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8)     } # else = updated
(8)   } # authorize = updated
(8) Found Auth-Type = eap
(8) Found Auth-Type = eap
(8) ERROR: Warning:  Found 2 auth-types on request for user 'host/mh300416.millerextra.com'
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site
(8)   authenticate {
(8) eap: Expiring EAP session with state 0x9aa27e309c487356
(8) eap: Finished EAP session with state 0x9aa27e309c487356
(8) eap: Previous EAP request found for state 0x9aa27e309c487356, released from the list
(8) eap: Peer sent packet with method EAP TLS (13)
(8) eap: Calling submodule eap_tls to process data
(8) eap_tls: Continuing EAP-TLS
(8) eap_tls: Got final TLS record fragment (305 bytes)
(8) eap_tls: [eaptls verify] = ok
(8) eap_tls: Done initial handshake
(8) eap_tls: TLS_accept: SSLv3/TLS write server done
(8) eap_tls: <<< recv TLS 1.2  [length 0b43]
(8) eap_tls: TLS - Creating attributes from certificate OIDs
(8) eap_tls:   TLS-Cert-Expiration := "360203235800Z"
(8) eap_tls:   TLS-Cert-Valid-Since := "111215110200Z"
(8) eap_tls:   TLS-Cert-Subject := "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA"
(8) eap_tls:   TLS-Cert-Issuer := "/O=MG_TREE/OU=Organizational CA"
(8) eap_tls:   TLS-Cert-Common-Name := "Intermediate CA"
(8) eap_tls: TLS - Creating attributes from certificate OIDs
(8) eap_tls:   TLS-Client-Cert-Serial := "4a25"
(8) eap_tls:   TLS-Client-Cert-Expiration := "361029154426Z"
(8) eap_tls:   TLS-Client-Cert-Valid-Since := "161103154426Z"
(8) eap_tls:   TLS-Client-Cert-Subject := "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=mh300416.millerextra.com"
(8) eap_tls:   TLS-Client-Cert-Issuer := "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA"
(8) eap_tls:   TLS-Client-Cert-Common-Name := "mh300416.millerextra.com"
(8) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication"
(8) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2"
(8) eap_tls: EXPAND %{User-Name}
(8) eap_tls:    --> host/mh300416.millerextra.com
(8) eap_tls: checking certificate CN (mh300416.millerextra.com) with xlat'ed value (host/mh300416.millerextra.com)
tls: Certificate CN (mh300416.millerextra.com) does not match specified value (host/mh300416.millerextra.com)!
(8) eap_tls: >>> send TLS 1.2  [length 0002]
(8) eap_tls: ERROR: TLS Alert write:fatal:internal error
tls: TLS_accept: Error in error
(8) eap_tls: ERROR: Failed in __FUNCTION__ (SSL_read): error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed
(8) eap_tls: ERROR: System call (I/O) error (-1)
(8) eap_tls: ERROR: TLS receive handshake failed during operation
(8) eap_tls: ERROR: [eaptls process] = fail
(8) eap:
(8) eap: Sending EAP Failure (code 4) ID 234 length 4
(8) eap: Failed in EAP select
(8)     [eap] = invalid
(8)   } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) Post-Auth-Type sub-section not found.  Ignoring.
(8) Delaying response for 1.000000 seconds
________________________________

Miller Homes Limited Registered in Scotland - SC255429
2 Lochside View, Edinburgh Park, Edinburgh, EH12 9DH

Disclaimer: The Information in this e-mail is confidential and for use by the addressee(s) only. It may also be privileged. If you are not the intended recipient please notify us immediately on +44 (0) 870 336 5000 and delete the message from your computer: you may not copy or forward it, or use or disclose its contents to any other person. We do not accept any liability or responsibility for: (1) changes made to this email after it was sent, or (2) viruses transmitted through this email or any attachment.

Miller Homes Limited <https://www.millerhomes.co.uk>