It's work!! , but now have a problem from cisco.
Yes. It's not sending Service-Type for console logins:
rad_recv: Access-Request packet from host 192.168.10.100:1812, id=19, length=79 NAS-IP-Address = 192.168.10.100 NAS-Port = 1 NAS-Port-Type = Virtual User-Name = "user100" Calling-Station-Id = "192.168.10.120" User-Password = "pass"
Ok. Change over things in users file. Put framed entry first: usr100 Auth-Type := Local, User-Password := "pass", Service-Type == Framed-User Called-Station-Id == "1133", Service-Type = Framed-User, Framed-Protocol = PPP, Cisco-AVPair ="ip:addr-pool=dynpool" than add second entry without Service-Type on check line: usr100 User-Password := "pass" Service-Type = NAS-Prompt-User, cisco-avpair = "shell:priv-lvl=0" DEFAULT entries should stay the same. Ivan Kalik Kalik Informatika ISP