Hi , Alan is right. If you connect you pc directly to you router then you must configure the port to accept dot1x request usually they call dot1x port control. If you have wireless controller from the AAA settings you can test it and the same time you can see the request from the radius ( if you are running radiusd -X) Regards, Andy Antonopoulos Sent from my iPhone On 16 Jul 2012, at 08:52, alan buxey <A.L.M.Buxey@lboro.ac.uk> wrote:
Hi,
what makes you think you can send RADIUS requests to this router and for it to then send those requests to your server?
if its a typical router, then it will ne acting as a NAS to directly connected clients - and those clients will be sending their authentication to the NAS using 802.1X (EAPOW or EAPOL) which then get taken by the RADIUS server and converted to RADIUS over IP to the RADIUS server.
alan