Hello Tevfik, Try changing the operator from == to := when assigning the Framed IP and Framed Netmask. I would also recommend it for others but you're better off reading the following link which should give you an understanding of the operators in use: http://wiki.freeradius.org/Operators Best regards, Adrian Boros -----Original Message----- From: freeradius-users-bounces+adrian=dsl4u.ca@lists.freeradius.org [mailto:freeradius-users-bounces+adrian=dsl4u.ca@lists.freeradius.org] On Behalf Of Tevfik Ceydeliler Sent: Monday, January 11, 2010 4:55 AM To: freeradius-users@lists.freeradius.org Subject: My Static IP Client conf. not work Hi, I have a client, when I put this client into an IP pool everything is ok. But when I move him for framed-Ip (static IP),he can't get that IP address. Note: I use a secovid as realm and NAS is Telecom Operator (For APN) I dont know what i should check. Can you help me to start? ################################################################# Here is the user configuration: FOR POOL --> tevfikceydeliler Service-Type == Framed-User,Packet-Type==Access-Request, Proxy-To-Realm := 10.1.1.51, Pool-Name := BirmasGPRS For Static IP --> tevfikceydeliler Packet-Type==Access-Request, Proxy-To-Realm := 10.1.1.51, Framed-IP-Address == 172.30.65.90, Framed-IP-Netmask == 255.255.255, Framed-MTU = 1500, Framed-Routing = None, Framed-Protocol = PPP, Service-Type = Framed, Fall-Through = Yes AND DEFAULTS --> DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP DEFAULT Auth-Type := Accept ################################################### Bu elektronik postada bulunan tum fikir ve gorusler ve ekindeki dosyalar sadece adres sahip/sahiplerine ait olup, Yasar Toplulugu Sirketleri bu mesajin icerigi ile ilgili olarak hic bir hukuksal sorumlulugu kabul etmez. Eger gonderilmesi dusunulen kisi veya kurulus degilseniz, lutfen gonderen kisiyi derhal haberdar ediniz ve mesaji sisteminizden siliniz.The information contained in this e-mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed and Yasar Group Companies do not accept legal responsibility for the contents. If you are not the intended recipient, please immediately notify the sender and delete it from your system. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html