EAP-MSCHAP-V2 - [mschap] FAILED: No NT/LM-Password. Cannot perform authentication.

5 Oct 2010

      Hello,

I am trying to Implement EAP-ttls and MSCHAP(V2). 
I tried all the forums to solutions.

I am getting the following error.

[mschapv2] +- entering group MS-CHAP {...}
[mschap] No Cleartext-Password configured.  Cannot create LM-Password.
[mschap] No Cleartext-Password configured.  Cannot create NT-Password.
[mschap] Told to do MS-CHAPv2 for john with NT-Password
[mschap] FAILED: No NT/LM-Password.  Cannot perform authentication.
[mschap] FAILED: MS-CHAP2-Response is incorrect

below is the Radius information:

FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan  5 2010
at 02:49:11
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. 
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A 
PARTICULAR PURPOSE. 
You may redistribute copies of FreeRADIUS under the terms of the 
GNU General Public License v2. 
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/krb5
including configuration file
/etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
	allow_core_dumps = yes
}
including dictionary file /etc/freeradius/dictionary
main {
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 1024
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
	stripped_names = no
	auth = no
	auth_badpass = no
	auth_goodpass = no
 }
 security {
	max_attributes = 200
	reject_delay = 1
	status_server = no
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
	retry_delay = 5
	retry_count = 3
	default_fallback = no
	dead_time = 120
	wake_all_if_all_dead = no
 }
 home_server localhost {
	ipaddr = 127.0.0.1
	port = 1812
	type = "auth"
	secret = "testing123"
	response_window = 20
	max_outstanding = 65536
	require_message_authenticator = no
	zombie_period = 40
	status_check = "status-server"
	ping_interval = 30
	check_interval = 30
	num_answers_to_alive = 3
	num_pings_to_alive = 3
	revive_interval = 120
	status_check_timeout = 4
	irt = 2
	mrt = 16
	mrc = 5
	mrd = 30
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client 127.0.0.1 {
	require_message_authenticator = no
	secret = "testing123"
	shortname = "localhost"
	nastype = "other"
 }
 client 5.5.5.101/24 {
	require_message_authenticator = no
	secret = "secret"
	shortname = "private-network-1"
 }
 client 192.168.0.0/16 {
	require_message_authenticator = no
	secret = "secret"
	shortname = "private-network-1"
 }
 client 10.0.0.0/8 {
	require_message_authenticator = no
	secret = "secret"
	shortname = "private-network-1"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
	wait = yes
	input_pairs = "request"
	shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating pap
  pap {
	encryption_scheme = "crypt"
	auto_header = yes
  }
 Module: Linked to module rlm_chap
 Module: Instantiating chap
 Module: Linked to module rlm_mschap
 Module: Instantiating mschap
  mschap {
	use_mppe = yes
	require_encryption = no
	require_strong = no
	with_ntdomain_hack = no
  }
 Module: Linked to module rlm_unix
 Module: Instantiating unix
  unix {
	radwtmp = "/var/log/freeradius/radwtmp"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating eap
  eap {
	default_eap_type = "tls"
	timer_expire = 60
	ignore_unknown_eap_types = no
	cisco_accounting_username_bug = no
	max_sessions = 2048
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
	challenge = "Password: "
	auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
	rsa_key_exchange = no
	dh_key_exchange = yes
	rsa_key_length = 512
	dh_key_length = 512
	verify_depth = 0
	pem_file_type = yes
	private_key_file = "/root/server_key.pem"
	certificate_file = "/root/server_cert.pem"
	CA_file = "/root/ca_cert.pem"
	private_key_password = "whatever"
	dh_file = "/dev/null"
	random_file = "/dev/urandom"
	fragment_size = 500
	include_length = yes
	check_crl = no
    cache {
	enable = no
	lifetime = 24
	max_entries = 255
    }
   }
WARNING: rlm_eap_tls: Unable to set DH parameters.  DH cipher suites may not
work!
WARNING: Fix this by running the OpenSSL command listed in eap.conf
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
	default_eap_type = "md5"
	copy_request_to_tunnel = no
	use_tunneled_reply = yes
	include_length = yes
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
	with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating suffix
  realm suffix {
	format = "suffix"
	delimiter = "@"
	ignore_default = no
	ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating files
  files {
	usersfile = "/etc/freeradius/users"
	acctusersfile = "/etc/freeradius/acct_users"
	preproxy_usersfile = "/etc/freeradius/preproxy_users"
	compat = "no"
  }
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
	reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
	reply-message = "You are calling outside your allowed timespan  "
	minimum-timeout = 60
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating radutmp
  radutmp {
	filename = "/var/log/freeradius/radutmp"
	username = "%{User-Name}"
	case_sensitive = yes
	check_with_nas = yes
	perm = 384
	callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
	attrsfile = "/etc/freeradius/attrs.access_reject"
	key = "%{User-Name}"
  }
 } # modules
} # server
server {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating preprocess
  preprocess {
	huntgroups = "/etc/freeradius/huntgroups"
	hints = "/etc/freeradius/hints"
	with_ascend_hack = no
	ascend_channels_per_line = 23
	with_ntdomain_hack = no
	with_specialix_jetstream_hack = no
	with_cisco_vsa_hack = no
	with_alvarion_vsa_hack = no
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating acct_unique
  acct_unique {
	key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating detail
  detail {
	detailfile =
"/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
	header = "%t"
	detailperm = 384
	dirperm = 493
	locking = no
	log_packet_header = no
  }
 Module: Instantiating attr_filter.accounting_response
  attr_filter attr_filter.accounting_response {
	attrsfile = "/etc/freeradius/attrs.accounting_response"
	key = "%{User-Name}"
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
	type = "auth"
	ipaddr = 192.168.0.151
	port = 0
}
listen {
	type = "acct"
	ipaddr = 192.168.0.151
	port = 0
}
Listening on authentication address 192.168.0.151 port 1812
Listening on accounting address 192.168.0.151 port 1813
Listening on proxy address 192.168.0.151 port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=0,
length=116
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message = 0x02000009016a6f686e
	Message-Authenticator = 0x63345840c269c1b54fb17e2e2137cdb8
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 9
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
[pap] WARNING! No "known good" password found for the user.  Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Requiring client certificate
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 0 to 192.168.0.177 port 58989
	EAP-Message = 0x010100060d20
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x70851e297084136bafa60810ea244249
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=1,
length=131
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message = 0x020100060315
	State = 0x70851e297084136bafa60810ea244249
	Message-Authenticator = 0x704f97c360d41603d551267a2a606547
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
[pap] WARNING! No "known good" password found for the user.  Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/ttls
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 1 to 192.168.0.177 port 58989
	EAP-Message = 0x010200061520
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x70851e2971870b6bafa60810ea244249
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=2,
length=219
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message =
0x0202005e150016030100530100004f03014caaabcb897edcddb6e87019dafef307071a0b69b3b6320ebe5ee47115c46ed200002800390038003500160013000a00330032002f000700050004001500120009001400110008000600030100
	State = 0x70851e2971870b6bafa60810ea244249
	Message-Authenticator = 0x763cd104835060737d3e97197682e6de
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 94
[eap] Continuing tunnel setup.
++[eap] returns ok
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7 
[ttls] Done initial handshake
[ttls]     (other): before/accept initialization 
[ttls]     TLS_accept: before/accept initialization 
[ttls] <<< TLS 1.0 Handshake [length 0053], ClientHello  
[ttls]     TLS_accept: SSLv3 read client hello A 
[ttls] >>> TLS 1.0 Handshake [length 002a], ServerHello  
[ttls]     TLS_accept: SSLv3 write server hello A 
[ttls] >>> TLS 1.0 Handshake [length 06d7], Certificate  
[ttls]     TLS_accept: SSLv3 write certificate A 
[ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
[ttls]     TLS_accept: SSLv3 write server done A 
[ttls]     TLS_accept: SSLv3 flush data 
[ttls]     TLS_accept: Need to read more data: SSLv3 read client certificate
A
In SSL Handshake Phase 
In SSL Accept mode  
[ttls] eaptls_process returned 13 
++[eap] returns handled
Sending Access-Challenge of id 2 to 192.168.0.177 port 58989
	EAP-Message =
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
	EAP-Message =
0x6f7443415f676368656e6740776963686f7275732e636f6d301e170d3038303531323231313432395a170d3138303531303231313432395a30819c310b3009060355040613025553311330110603550408130a43616c69666f726e69613111300f0603550407130853616e204a6f73653111300f060355040a1308576963686f727573310d300b060355040b1304456e6767311730150603550403140e64736861685f7365727665725f32312a302806092a864886f70d010901161b64736861685f7365727665725f3240776963686f7275732e636f6d30819f300d06092a864886f70d010101050003818d0030818902818100b4cc27
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x70851e2972860b6bafa60810ea244249
Finished request 2.
Going to the next request
Waking up in 4.3 seconds.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=3,
length=131
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message = 0x020300061500
	State = 0x70851e2972860b6bafa60810ea244249
	Message-Authenticator = 0x444c552d039d79bf7b6763fb8a91ecdb
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] Received TLS ACK
[ttls] ACK handshake fragment handler
[ttls] eaptls_verify returned 1 
[ttls] eaptls_process returned 13 
++[eap] returns handled
Sending Access-Challenge of id 3 to 192.168.0.177 port 58989
	EAP-Message =
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
	EAP-Message =
0x357dcf0bccca40f004504648c02ec1df9f6e91e7600f90669fb3385b64ea4ff1880def479e02f66c4620d448606e623b967e370814fd1f5d512cca0003f0308203ec30820355a0030201020209009c1418fe79618077300d06092a864886f70d01010505003081ab310b3009060355040613025553311330110603550408130a43616c69666f726e69613111300f0603550407130853616e204a6f73653111300f060355040a1308576963686f727573310c300a060355040b1303456e67311f301d06035504030c16776963686f7275735f726f6f7443415f676368656e673132303006092a864886f70d0109011623776963686f7275
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x70851e2973810b6bafa60810ea244249
Finished request 3.
Going to the next request
Waking up in 4.1 seconds.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=4,
length=131
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message = 0x020400061500
	State = 0x70851e2973810b6bafa60810ea244249
	Message-Authenticator = 0x140b333768c76c631cabee64dfef9fee
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] Received TLS ACK
[ttls] ACK handshake fragment handler
[ttls] eaptls_verify returned 1 
[ttls] eaptls_process returned 13 
++[eap] returns handled
Sending Access-Challenge of id 4 to 192.168.0.177 port 58989
	EAP-Message =
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
	EAP-Message =
0x4886f70d010101050003818d0030818902818100a35084afbdc782cb1111d16f11d6372c4aac07118813f2d55b0a52a3df951f961530fd4694defb94981e172e46e25e7fb7925a86975a933cb8761c243575b397abde2a6133b294b1b3bd1ef6a62a6882bdd7761d7942a77cf43422b526742dd45c4cf6cd167e43b8e256778e097490fdf0ce872e23c310806e68f16b32167e290203010001a382011430820110301d0603551d0e04160414d34f52eabf21357fb1085256754198a926aab1723081e00603551d230481d83081d58014d34f52eabf21357fb1085256754198a926aab172a181b1a481ae3081ab310b3009060355040613
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x70851e2974800b6bafa60810ea244249
Finished request 4.
Going to the next request
Waking up in 4.1 seconds.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=5,
length=131
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message = 0x020500061500
	State = 0x70851e2974800b6bafa60810ea244249
	Message-Authenticator = 0x6a3bdc1ff10f32916a28e534be84ff3d
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] Received TLS ACK
[ttls] ACK handshake fragment handler
[ttls] eaptls_verify returned 1 
[ttls] eaptls_process returned 13 
++[eap] returns handled
Sending Access-Challenge of id 5 to 192.168.0.177 port 58989
	EAP-Message =
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
	EAP-Message =
0x23ce6ff7e87fcd4a52df7ec5b518b687912c535d1f4b875542b1c49997ad16b4408ea16a423ad1e504eab9d6bd33aa4c1b6c1cea5cee6b52dcb7dd251f0a20aac54e0ef046f1d41d62a6f31c8f1c75c6ce9b1a74633147671b5016030100040e000000
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x70851e2975830b6bafa60810ea244249
Finished request 5.
Going to the next request
Waking up in 4.0 seconds.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=6,
length=329
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message =
0x020600cc150016030100861000008200801dd452024420fce1efff4fdf3553a914faf288e5aa0a5c3a1c38ddf96cd6e626efee41762495b18e7768d44cc9128088ba76483ceaf73cb746f3fc785c3298321053c6b90276eec623eeefa2648c8d2ec1e96a1005c262c91f10d6faa3eb55768e46dc7e35978325d5f7b6857a75fe48322dcec2e17bab2af4d6d4de0bd696d81403010001011603010030c4f83f149442210cb5d56e073822928b7eb57cd891c3e934f01f4e55b1161dc00bcb5316e6e0fb3cb888a15dc739ea36
	State = 0x70851e2975830b6bafa60810ea244249
	Message-Authenticator = 0x88fab0713d28fae91f143a8e06f7a508
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 204
[eap] Continuing tunnel setup.
++[eap] returns ok
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7 
[ttls] Done initial handshake
[ttls] <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange  
[ttls]     TLS_accept: SSLv3 read client key exchange A 
[ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001]  
[ttls] <<< TLS 1.0 Handshake [length 0010], Finished  
[ttls]     TLS_accept: SSLv3 read finished A 
[ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001]  
[ttls]     TLS_accept: SSLv3 write change cipher spec A 
[ttls] >>> TLS 1.0 Handshake [length 0010], Finished  
[ttls]     TLS_accept: SSLv3 write finished A 
[ttls]     TLS_accept: SSLv3 flush data 
[ttls]     (other): SSL negotiation finished successfully 
SSL Connection Established 
[ttls] eaptls_process returned 13 
++[eap] returns handled
Sending Access-Challenge of id 6 to 192.168.0.177 port 58989
	EAP-Message =
0x0107004515800000003b14030100010116030100307f9a14be792d03d1f03354c1fca77fe40b4c45ca62ca82615333432f0690a6d70f619ae59a7b3f675013ebf231abc2c5
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x70851e2976820b6bafa60810ea244249
Finished request 6.
Going to the next request
Waking up in 3.9 seconds.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=7,
length=221
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message =
0x02070060150017030100202abf4899df6abcd33096f265cdd16e719635702bf38ce8f880b7e0fb959799051703010030d2669fb2fb2f436aa094debcdb79518f4c0ee3f33e2877a4a44f3a446ccc10c64a542bb3b5378c56b5418653b3164466
	State = 0x70851e2976820b6bafa60810ea244249
	Message-Authenticator = 0x1e478f10f4bab4278b9faf92ba4d5b0d
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 96
[eap] Continuing tunnel setup.
++[eap] returns ok
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7 
[ttls] Done initial handshake
[ttls] eaptls_process returned 7 
[ttls] Session established.  Proceeding to decode tunneled attributes.
[ttls] Got tunneled request
	EAP-Message = 0x02000009016a6f686e
	FreeRADIUS-Proxied-To = 127.0.0.1
[ttls] Got tunneled identity of john
[ttls] Setting default EAP type for tunneled EAP session.
[ttls] Sending tunneled request
	EAP-Message = 0x02000009016a6f686e
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "john"
server  {
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 0 length 9
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
[pap] WARNING! No "known good" password found for the user.  Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
} # server 
[ttls] Got tunneled reply code 11
	EAP-Message = 0x010100160410e04582c33411dfd2af929b709cc23601
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb0ed2c00b0ec285c05125915d24f2066
[ttls] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 7 to 192.168.0.177 port 58989
	EAP-Message =
0x0108004f1580000000451703010040a13a91a48ddd4ed8d7e4b2cfb5e0b567a38096afc082a654395446250099e84d5d5e952f3e2875e15e3e18ca6b750ad68395704ca589b175659d71ddbfc8c29f
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x70851e29778d0b6bafa60810ea244249
Finished request 7.
Going to the next request
Waking up in 3.8 seconds.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=8,
length=221
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message =
0x02080060150017030100208dddbae8a2d00c011b90a2f31006dcde6475e6e38ef85fc464516e9080f6d72617030100309d5904194f3b071d1e938c302c13147ca9db0230e7ae163df618f510286caf2c01d77224032f091cf153429ab9707d97
	State = 0x70851e29778d0b6bafa60810ea244249
	Message-Authenticator = 0xe690ad1ec9220fb4e4d1bd78cec8e20a
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 8 length 96
[eap] Continuing tunnel setup.
++[eap] returns ok
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7 
[ttls] Done initial handshake
[ttls] eaptls_process returned 7 
[ttls] Session established.  Proceeding to decode tunneled attributes.
[ttls] Got tunneled request
	EAP-Message = 0x02010006031a
	FreeRADIUS-Proxied-To = 127.0.0.1
[ttls] Sending tunneled request
	EAP-Message = 0x02010006031a
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "john"
	State = 0xb0ed2c00b0ec285c05125915d24f2066
server  {
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
[pap] WARNING! No "known good" password found for the user.  Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/mschapv2
[eap] processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
++[eap] returns handled
} # server 
[ttls] Got tunneled reply code 11
	EAP-Message =
0x0102001e1a01020019102959e603f5ec55fc4d3b4d1e6cdfb4626a6f686e
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xb0ed2c00b1ef365c05125915d24f2066
[ttls] Got tunneled Access-Challenge
++[eap] returns handled
Sending Access-Challenge of id 8 to 192.168.0.177 port 58989
	EAP-Message =
0x0109004f158000000045170301004000f2d6ff37bd5591853aac3b581da2ef6734c26110f9a51dabcbba3d31640c1dbf58e744e564b57c15209c7f26b384d6f91de9623bdc2c9c4671f9ae0f60f00f
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x70851e29788c0b6bafa60810ea244249
Finished request 8.
Going to the next request
Waking up in 3.7 seconds.
rad_recv: Access-Request packet from host 192.168.0.177 port 58989, id=9,
length=269
	User-Name = "john"
	NAS-IP-Address = 127.0.0.1
	Calling-Station-Id = "02-00-00-00-00-01"
	Framed-MTU = 1400
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 11Mbps 802.11b"
	EAP-Message =
0x020900901500170301002059b68674bd770cdb478dc184ed5ed0ba3d492448af8b1f4eb868a73db5c164901703010060b6dd122a70a4b877fd516c218f952adf2a645b4c942718926f817788a5682539e3e1498d33b9ba76d3f14a3185140df1e4f89583990dbd365c432a7f0ebcc5b2af9a7762688a2318f7c972f3055bcdee12b2d334d3e233d4a1ee57ff15ef61c0
	State = 0x70851e29788c0b6bafa60810ea244249
	Message-Authenticator = 0x03d36e4152a4b579117dbbcded472d58
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 9 length 144
[eap] Continuing tunnel setup.
++[eap] returns ok
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/ttls
[eap] processing type ttls
[ttls] Authenticate
[ttls] processing EAP-TLS
[ttls] eaptls_verify returned 7 
[ttls] Done initial handshake
[ttls] eaptls_process returned 7 
[ttls] Session established.  Proceeding to decode tunneled attributes.
[ttls] Got tunneled request
	EAP-Message =
0x0202003f1a0202003a313040f71ffff45932c78288172e36d8020000000000000000fed561ff311854eb54e8dbc91a6c84a5461735610fc0a048006a6f686e
	FreeRADIUS-Proxied-To = 127.0.0.1
[ttls] Sending tunneled request
	EAP-Message =
0x0202003f1a0202003a313040f71ffff45932c78288172e36d8020000000000000000fed561ff311854eb54e8dbc91a6c84a5461735610fc0a048006a6f686e
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "john"
	State = 0xb0ed2c00b1ef365c05125915d24f2066
server  {
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "john", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 63
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
WARNING: Found User-Password == "...".
WARNING: Are you sure you don't mean Cleartext-Password?
WARNING: See "man rlm_pap" for more information.
[files] users: Matched entry DEFAULT at line 2
++[files] returns ok
[pap] WARNING! No "known good" password found for the user.  Authentication
may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/mschapv2
[eap] processing type mschapv2
[mschapv2] +- entering group MS-CHAP {...}
[mschap] No Cleartext-Password configured.  Cannot create LM-Password.
[mschap] No Cleartext-Password configured.  Cannot create NT-Password.
[mschap] Told to do MS-CHAPv2 for john with NT-Password
[mschap] FAILED: No NT/LM-Password.  Cannot perform authentication.
[mschap] FAILED: MS-CHAP2-Response is incorrect
++[mschap] returns reject
[eap] Freeing handler
++[eap] returns reject
Failed to authenticate the user.
} # server 
[ttls] Got tunneled reply code 3
	MS-CHAP-Error = "\002E=691 R=1"
	EAP-Message = 0x04020004
	Message-Authenticator = 0x00000000000000000000000000000000
[ttls] Got tunneled Access-Reject
[eap] Handler failed in EAP/ttls
rlm_eap_ttls: Freeing handler for user john
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
+- entering group REJECT {...}
[attr_filter.access_reject] 	expand: %{User-Name} -> john
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 9 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 9
Sending Access-Reject of id 9 to 192.168.0.177 port 58989
	EAP-Message = 0x04090004
	Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 2.4 seconds.
Cleaning up request 0 ID 0 with timestamp +173
Cleaning up request 1 ID 1 with timestamp +173
Waking up in 0.6 seconds.
Cleaning up request 2 ID 2 with timestamp +173
Cleaning up request 3 ID 3 with timestamp +174
Waking up in 0.1 seconds.
Cleaning up request 4 ID 4 with timestamp +174
Cleaning up request 5 ID 5 with timestamp +174
Waking up in 0.1 seconds.
Cleaning up request 6 ID 6 with timestamp +174
Waking up in 0.1 seconds.
Cleaning up request 7 ID 7 with timestamp +174
Waking up in 0.1 seconds.
Cleaning up request 8 ID 8 with timestamp +174
Waking up in 1.2 seconds.
Cleaning up request 9 ID 9 with timestamp +174
Ready to process requests.

Thanks,
BMano
-- 
View this message in context: http://freeradius.1045715.n5.nabble.com/EAP-MSCHAP-V2-mschap-FAILED-No-NT-LM...
Sent from the FreeRadius - User mailing list archive at Nabble.com.

EAP-MSCHAP-V2 - [mschap] FAILED: No NT/LM-Password. Cannot perform authentication.

bmano