Hi Alan, Any thought gone on this? Why is the plugin unable to resolve the IP address of the RADIUS server, or trying to resolve an IP to IP? Is that something related to compilation? Regards Soban ________________________________________ From: Sobanbabu Bakthavathsalu Sent: 02 November 2007 11:59 To: FreeRadius users mailing list Subject: RE: PAM_RADIUS_AUTH Is this compatible with Solaris 10 First time I tried with IP address only, and got the following error. Oct 25 19:58:20 ada-delegate1 login: [ID 801593 auth.error] pam_radius_auth: Failed looking up IP address for RADIUS server 10.213.31.186 (errcode=12) Oct 25 19:58:20 ada-delegate1 login: [ID 801593 auth.error] pam_radius_auth: Failed looking up IP address for RADIUS server 10.213.69.133 (errcode=12) It was trying to resolve the IP address for an address again. Later I made a host entry and tried and the changed the config to name again. And getting the same error. Regards Soban ________________________________________ From: Sobanbabu Bakthavathsalu Sent: 31 October 2007 10:46 To: FreeRadius users mailing list Subject: RE: PAM_RADIUS_AUTH Hi Alan, First time I tried with IP address only, and got the following error. Oct 25 19:58:20 ada-delegate1 login: [ID 801593 auth.error] pam_radius_auth: Failed looking up IP address for RADIUS server 10.213.31.186 (errcode=12) Oct 25 19:58:20 ada-delegate1 login: [ID 801593 auth.error] pam_radius_auth: Failed looking up IP address for RADIUS server 10.213.69.133 (errcode=12) It was trying to resolve the IP address for an address again. Later I made a host entry and tried and the changed the config to name again. And getting the same error. Regards Soban ________________________________________ From: freeradius-users-bounces@lists.freeradius.org [freeradius-users-bounces@lists.freeradius.org] On Behalf Of Alan DeKok [aland@deployingradius.com] Sent: 30 October 2007 17:28 To: FreeRadius users mailing list Subject: Re: PAM_RADIUS_AUTH Sobanbabu Bakthavathsalu wrote:
Thank you for the response. There is no firewall in between the RADIUS server and Solaris server (RADIUS client), only an Cisco router with standard ACL. I have verified the ACL matches counter and found that the request from the clinet itself is not reachign the router. Is that host entries in /etc/hosts file wont work for this, do I need a DNS server for RADIUS server name authentication to work with pam_radius_auth.
No. You *can* enter just an IP address... Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***