Hi, Thank you.
It all depends on what you want. But it's 2021... 32-bit systems aren't very relevant.
Yes. I agree.
I am having a few doubts? Can you plz guide me? Windows clients failed to authenticate in FreeRADIUS. But in debug mode no error messages were noticed.
<sigh> If you're not going to post the debug output, I don't know why you're asking questions here. You've been told REPEATEDLY to do this.
I am really sorry. The debug output given below... Wndows clients not able to connect with the RADIUS (EAP-TTLS-PAP - Google LDAP) (0) Received Access-Request Id 106 from 172.16.20.210:60597 to 172.16.11.30:1812 length 241 (0) User-Name = "bvm21001@tanuvas.org.in" (0) NAS-IP-Address = 172.16.20.210 (0) NAS-Port = 0 (0) NAS-Identifier = "172.16.20.23" (0) NAS-Port-Type = Wireless-802.11 (0) Calling-Station-Id = "88532ed4f90e" (0) Called-Station-Id = "fc7ff1c60940" (0) Service-Type = Framed-User (0) Framed-MTU = 1100 (0) EAP-Message = 0x0201001c0162766d32313030314074616e757661732e6f72672e696e (0) Aruba-Essid-Name = "TANUVAS" (0) Aruba-Location-Id = "Pharmacology_Lab" (0) Aruba-AP-Group = "MVC_AcademicAP_VC" (0) Aruba-Device-Type = "NOFP" (0) Message-Authenticator = 0x25f25cd80a7b44ca01746810ccc24170 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "tanuvas.org.in" for User-Name = " bvm21001@tanuvas.org.in" (0) suffix: Found realm "tanuvas.org.in" (0) suffix: Adding Stripped-User-Name = "bvm21001" (0) suffix: Adding Realm = "tanuvas.org.in" (0) suffix: Authentication realm is LOCAL (0) [suffix] = ok (0) eap: Peer sent EAP Response (code 2) ID 1 length 28 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 2 length 6 (0) eap: EAP session adding &reply:State = 0xb2d76114b2d57423 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 106 from 172.16.11.30:1812 to 172.16.20.210:60597 length 0 (0) EAP-Message = 0x010200061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xb2d76114b2d57423e9cf89ec8f3764aa (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 107 from 172.16.20.210:60597 to 172.16.11.30:1812 length 388 (1) User-Name = "bvm21001@tanuvas.org.in" (1) NAS-IP-Address = 172.16.20.210 (1) NAS-Port = 0 (1) NAS-Identifier = "172.16.20.23" (1) NAS-Port-Type = Wireless-802.11 (1) Calling-Station-Id = "88532ed4f90e" (1) Called-Station-Id = "fc7ff1c60940" (1) Service-Type = Framed-User (1) Framed-MTU = 1100 (1) EAP-Message = 0x0202009d158000000093160303008e0100008a03036172b1c1de6237ab11952c07b4ca81e5fa8609a023bd3650c048ac9a4e95a77800002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000037000a00080006001d00170018000b000201 (1) State = 0xb2d76114b2d57423e9cf89ec8f3764aa (1) Aruba-Essid-Name = "TANUVAS" (1) Aruba-Location-Id = "Pharmacology_Lab" (1) Aruba-AP-Group = "MVC_AcademicAP_VC" (1) Aruba-Device-Type = "NOFP" (1) Message-Authenticator = 0xb7e83c01a82c07dbcba01d4023917228 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "tanuvas.org.in" for User-Name = " bvm21001@tanuvas.org.in" (1) suffix: Found realm "tanuvas.org.in" (1) suffix: Adding Stripped-User-Name = "bvm21001" (1) suffix: Adding Realm = "tanuvas.org.in" (1) suffix: Authentication realm is LOCAL (1) [suffix] = ok (1) eap: Peer sent EAP Response (code 2) ID 2 length 157 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xb2d76114b2d57423 (1) eap: Finished EAP session with state 0xb2d76114b2d57423 (1) eap: Previous EAP request found for state 0xb2d76114b2d57423, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Peer indicated complete TLS record size will be 147 bytes (1) eap_ttls: Got complete TLS record (147 bytes) (1) eap_ttls: [eaptls verify] = length included (1) eap_ttls: (other): before/accept initialization (1) eap_ttls: TLS_accept: before/accept initialization (1) eap_ttls: <<< recv TLS 1.2 [length 008e] (1) eap_ttls: TLS_accept: SSLv3 read client hello A (1) eap_ttls: >>> send TLS 1.2 [length 0039] (1) eap_ttls: TLS_accept: SSLv3 write server hello A (1) eap_ttls: >>> send TLS 1.2 [length 08d3] (1) eap_ttls: TLS_accept: SSLv3 write certificate A (1) eap_ttls: >>> send TLS 1.2 [length 014d] (1) eap_ttls: TLS_accept: SSLv3 write key exchange A (1) eap_ttls: >>> send TLS 1.2 [length 0004] (1) eap_ttls: TLS_accept: SSLv3 write server done A (1) eap_ttls: TLS_accept: SSLv3 flush data (1) eap_ttls: TLS_accept: SSLv3 read client certificate A (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_ttls: In SSL Handshake Phase (1) eap_ttls: In SSL Accept mode (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 3 length 1004 (1) eap: EAP session adding &reply:State = 0xb2d76114b3d47423 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 107 from 172.16.11.30:1812 to 172.16.20.210:60597 length 0 (1) EAP-Message = 0x010303ec15c000000a7116030300390200003503035f6f25a42f9336d338a50ac4c8a0bbc37752fed4552a18121600267be828bd0400c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xb2d76114b3d47423e9cf89ec8f3764aa (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 108 from 172.16.20.210:60597 to 172.16.11.30:1812 length 237 (2) User-Name = "bvm21001@tanuvas.org.in" (2) NAS-IP-Address = 172.16.20.210 (2) NAS-Port = 0 (2) NAS-Identifier = "172.16.20.23" (2) NAS-Port-Type = Wireless-802.11 (2) Calling-Station-Id = "88532ed4f90e" (2) Called-Station-Id = "fc7ff1c60940" (2) Service-Type = Framed-User (2) Framed-MTU = 1100 (2) EAP-Message = 0x020300061500 (2) State = 0xb2d76114b3d47423e9cf89ec8f3764aa (2) Aruba-Essid-Name = "TANUVAS" (2) Aruba-Location-Id = "Pharmacology_Lab" (2) Aruba-AP-Group = "MVC_AcademicAP_VC" (2) Aruba-Device-Type = "NOFP" (2) Message-Authenticator = 0x1541d27a89bad69d36646fe6f9210e86 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "tanuvas.org.in" for User-Name = " bvm21001@tanuvas.org.in" (2) suffix: Found realm "tanuvas.org.in" (2) suffix: Adding Stripped-User-Name = "bvm21001" (2) suffix: Adding Realm = "tanuvas.org.in" (2) suffix: Authentication realm is LOCAL (2) [suffix] = ok (2) eap: Peer sent EAP Response (code 2) ID 3 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xb2d76114b3d47423 (2) eap: Finished EAP session with state 0xb2d76114b3d47423 (2) eap: Previous EAP request found for state 0xb2d76114b3d47423, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1004 (2) eap: EAP session adding &reply:State = 0xb2d76114b0d37423 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 108 from 172.16.11.30:1812 to 172.16.20.210:60597 length 0 (2) EAP-Message = 0x010403ec15c000000a7142b8b19395e52171dc162108c03cf4d3c86f234b0c449e6420d67d2afaf6ecaaf7243de135762948b1a4e615dd53e61291902ddf244638e87863c1d26fbc85617b15f483cc747b54470004e8308204e4308203cca003020102020900e3736d6d4f9383f6300d06092a864886f7 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xb2d76114b0d37423e9cf89ec8f3764aa (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 109 from 172.16.20.210:60597 to 172.16.11.30:1812 length 237 (3) User-Name = "bvm21001@tanuvas.org.in" (3) NAS-IP-Address = 172.16.20.210 (3) NAS-Port = 0 (3) NAS-Identifier = "172.16.20.23" (3) NAS-Port-Type = Wireless-802.11 (3) Calling-Station-Id = "88532ed4f90e" (3) Called-Station-Id = "fc7ff1c60940" (3) Service-Type = Framed-User (3) Framed-MTU = 1100 (3) EAP-Message = 0x020400061500 (3) State = 0xb2d76114b0d37423e9cf89ec8f3764aa (3) Aruba-Essid-Name = "TANUVAS" (3) Aruba-Location-Id = "Pharmacology_Lab" (3) Aruba-AP-Group = "MVC_AcademicAP_VC" (3) Aruba-Device-Type = "NOFP" (3) Message-Authenticator = 0x6e8f0c64848306003ba35541e847afbc (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "tanuvas.org.in" for User-Name = " bvm21001@tanuvas.org.in" (3) suffix: Found realm "tanuvas.org.in" (3) suffix: Adding Stripped-User-Name = "bvm21001" (3) suffix: Adding Realm = "tanuvas.org.in" (3) suffix: Authentication realm is LOCAL (3) [suffix] = ok (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xb2d76114b0d37423 (3) eap: Finished EAP session with state 0xb2d76114b0d37423 (3) eap: Previous EAP request found for state 0xb2d76114b0d37423, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 695 (3) eap: EAP session adding &reply:State = 0xb2d76114b1d27423 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 109 from 172.16.11.30:1812 to 172.16.20.210:60597 length 0 (3) EAP-Message = 0x010502b7158000000a710530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382010100916dab332c8f26db01809a0101ebf27503ab3c80c1ec977315a582 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xb2d76114b1d27423e9cf89ec8f3764aa (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 110 from 172.16.20.210:60597 to 172.16.11.30:1812 length 367 (4) User-Name = "bvm21001@tanuvas.org.in" (4) NAS-IP-Address = 172.16.20.210 (4) NAS-Port = 0 (4) NAS-Identifier = "172.16.20.23" (4) NAS-Port-Type = Wireless-802.11 (4) Calling-Station-Id = "88532ed4f90e" (4) Called-Station-Id = "fc7ff1c60940" (4) Service-Type = Framed-User (4) Framed-MTU = 1100 (4) EAP-Message = 0x0205008815800000007e16030300461000004241040c850e994ce6ddf7e214a2942e86601ee014d2e42fc79a364115af3ba61aa22ba7f1f9b8439471e9b144e304a3f9ba628d2427c17ac9749b488605ee8789ea3f140303000101160303002800000000000000004d9d5e39d56235723fcaf35f8cebd1 (4) State = 0xb2d76114b1d27423e9cf89ec8f3764aa (4) Aruba-Essid-Name = "TANUVAS" (4) Aruba-Location-Id = "Pharmacology_Lab" (4) Aruba-AP-Group = "MVC_AcademicAP_VC" (4) Aruba-Device-Type = "NOFP" (4) Message-Authenticator = 0x85863d5c40db14d6342f64bfa6c87687 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "tanuvas.org.in" for User-Name = " bvm21001@tanuvas.org.in" (4) suffix: Found realm "tanuvas.org.in" (4) suffix: Adding Stripped-User-Name = "bvm21001" (4) suffix: Adding Realm = "tanuvas.org.in" (4) suffix: Authentication realm is LOCAL (4) [suffix] = ok (4) eap: Peer sent EAP Response (code 2) ID 5 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xb2d76114b1d27423 (4) eap: Finished EAP session with state 0xb2d76114b1d27423 (4) eap: Previous EAP request found for state 0xb2d76114b1d27423, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: Peer indicated complete TLS record size will be 126 bytes (4) eap_ttls: Got complete TLS record (126 bytes) (4) eap_ttls: [eaptls verify] = length included (4) eap_ttls: <<< recv TLS 1.2 [length 0046] (4) eap_ttls: TLS_accept: SSLv3 read client key exchange A (4) eap_ttls: TLS_accept: SSLv3 read certificate verify A (4) eap_ttls: <<< recv TLS 1.2 [length 0001] (4) eap_ttls: <<< recv TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3 read finished A (4) eap_ttls: >>> send TLS 1.2 [length 0001] (4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A (4) eap_ttls: >>> send TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3 write finished A (4) eap_ttls: TLS_accept: SSLv3 flush data (4) eap_ttls: (other): SSL negotiation finished successfully (4) eap_ttls: SSL Connection Established (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 61 (4) eap: EAP session adding &reply:State = 0xb2d76114b6d17423 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 110 from 172.16.11.30:1812 to 172.16.20.210:60597 length 0 (4) EAP-Message = 0x0106003d1580000000331403030001011603030028efab9a40ca6b0e1d7a5fe6d7fc0cd2d8f47b16489a1d87bb93f0925dbeb4fb6e4cd62effa8bede08 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xb2d76114b6d17423e9cf89ec8f3764aa (4) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 106 with timestamp +7 (1) Cleaning up request packet ID 107 with timestamp +7 (2) Cleaning up request packet ID 108 with timestamp +7 (3) Cleaning up request packet ID 109 with timestamp +7 (4) Cleaning up request packet ID 110 with timestamp +7 Even after repeated requests the Windows client shows that as " Can't connect to this network" Regards, Thirunavukkarasu