Please ignore the last email, I have solved it, thank you very much for your help. The experience is great, and it would be even better if it could support distribution. 娶你苟命 <qunigouming@gmail.com> 于2023年12月15日周五 12:04写道：
Hi,Matthew
/usr/local/etc/raddb/mods-config/files/authorize[170]: Parse error (reply) for entry testuser: Unknown or invalid value *"Stelnet"* for attribute Login-Service Failed reading /usr/local/etc/raddb/mods-config/files/authorize /usr/local/etc/raddb/mods-enabled/files[9]: Instantiation failed for module "files"
RADIUS/7/ERROR: *The login-service type that server assigned does not match with the access type.*
[root@localhost ~]# egrep -v "*#|^$" /usr/local/etc/raddb/users testuser Cleartext-Password := "testpass" Service-Type = Framed-User, *Login-Service = Telnet,*
*I would like to ask how to define Login-Service as ssh? *
Matthew Newton via Freeradius-Users <freeradius-users@lists.freeradius.org> 于2023年12月13日周三 20:01写道：
On 13/12/2023 10:33, 娶你苟命 wrote:
But I encountered a new problem: the switch authentication log showed that the authentication had passed, but after passing the authentication, the switch automatically closed the ssh session. I didn't find out the specific problem from the radius debugging information and wireshark packet capture, so I ask for your advice.
As I said previously, this is not a FreeRADIUS problem, which is sending an Access-Accept. The switch doesn't like the reply, so you need to work out what attributes the switch is expecting. None of the examples you have sent have any extra attributes in the reply.
Ask the switch vendor what configuration you need on the switch or what attributes are needed, then configure FreeRADIUS to send that.
-- Matthew - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html