A.L.M.Buxey@lboro.ac.uk wrote:
Hi,
hmm, I'm not sure at all that you can have multi line attr filter matches... ie if you have seperate entries for each allowed type - i think that the very last defined one is the one taken....what you need to do is have a REGEX for the accetped types eg
Trapeze-VLAN-Name == VISITEUR, Trapeze-VLAN-Name == SIRC, Tunnel-Private-Group-Id == VISITEUR, Tunnel-Private-Group-Id == SIRC
should be something like
Trapeze-VLAN-Name =~ VISITEUR||SIRC Tunnel-Private-Group-Id =~ VISITEUR||SIRC
or somesuch
alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
You are right, it works with regex. I did like the file attrs suggest, but I can't do it working: # These rules allow: # o Only Login-User Service-Type ( no framed/ppp sessions ) # o Telnet sessions only ( no rlogin, tcp-clear ) # o Login hosts of either 192.168.1.1 or 192.168.1.2 # #tisp # Service-Type == Login-User, # Login-Service == Telnet, # Login-TCP-Port == 23, # Login-IP-Host == 192.168.1.1, # Login-IP-Host == 192.168.1.2 Thanks again. -- Mustapha BOUIKHIF Service Systèmes d'Information CNRS - DR4 tel: +33 1 69 82 33 97 fax: +33 1 69 82 33 39