FreeRADIUS Proxy configuration not working

5 May 2020

      Hi there,

I need to authenticate different services coming from the same NAS with a
different set of policies.
The NAS is signalling the different services using a specific
"NAS-Identifier" for every service.

For example, I have a NAS-Identifier == "wifi" when WiFi clients are to be
authenticated and I have a NAS-Identifier == "l2tp" when a VPN user should
be authenticated.
I need to authenticate WiFi users using their Active Directory computer
certificate (using PEAP) and I need to authenticate VPN users using their
Active Directory user name (plus their Yubikey, but I am not yet as far...)

Using the available information and guidelines, I managed it to
authenticate both services using the same server. It automatically accepts
either MSCHAPv2 or EAP requests.
But that is not what I want. I would like to have the VPN guys processed
with another ruleset that the one used for the WiFi folks...

Following the advice at
http://freeradius.1045715.n5.nabble.com/Go-to-virtual-server-by-nas-id-td575...
I added some home_servers and some home_server_pools in order to take care
of the different jobs.
In the default server config file, I added the following:

        if (NAS-Identifier == "wifi") {
                update control {
                        Home-Server-Pool := "wifi-clients-pool"
                }
        }
        if (NAS-Identifier == "l2tp") {
                update control {
                        Home-Server-Pool := "vpn-pool"
                }
        }

I left all the rest of the file as it was (in order not to break anything).
As it was mentioned in the comments of the default server config file, I
also added the same lines to the inner-tunnel config file.
After some time (two seconds or so), the authentication succeeded. But it
seems as if the default server configuration would be used (instead of the
wifi server) as you can see in the listing below (Listing 1).

When removing all the rest of the default server config file, the
authentication does not succeed anymore.

On some other site I found that it might have to be done like this:

        if (NAS-Identifier == "wifi") {
                update control {
                        Proxy-To-Realm := "wifi-clients-realm"
                }
        }
        if (NAS-Identifier == "l2tp") {
                update control {
                        Proxy-To-Realm := "vpn-realm"
                }
        }

But then, the authentication does not work at all anymore although now it
seems as if the wifi virtial server processes the request  (Listing 2).
Does anyone know how?

Here are the added contents to the proxy.conf file
home_server wifi-clients {
        virtual_server = wifi-clients
        type = auth
}

home_server vpn {
        virtual_server = vpn
        type = auth
}

home_server_pool wifi-clients-pool {
        home_server = wifi-clients
        type = fail-over
}

home_server_pool vpn-pool {
        home_server = vpn
        type = fail-over
}

(The virtual server configuration files are copies of the default server
file without the NAS-Identifier switching part shown above.)

Originally, I wanted the main server just to be a dispatcher, forwarding
the request either to the one or to the other virtual server.
Can that be done?
If so, how?
Im completely lost at the mpoment...

Best regards,
Tom

Listing 1:
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/ntlm_auth
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/eap
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/wifi-clients
including configuration file /etc/freeradius/3.0/sites-enabled/vpn
main {
 security {
  user = "freerad"
  group = "freerad"
  allow_core_dumps = no
 }
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server wifi-clients {
  virtual_server = "wifi-clients"
  port = 0
  type = "auth"
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server vpn {
  virtual_server = "vpn"
  port = 0
  type = "auth"
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 home_server_pool wifi-clients-pool {
type = fail-over
home_server = wifi-clients
 }
 realm wifi-clients-realm {
auth_pool = wifi-clients-pool
nostrip
 }
 home_server_pool vpn-pool {
type = fail-over
home_server = vpn
 }
 realm vpn-realm {
auth_pool = vpn-pool
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw03 {
  ipaddr = 10.10.10.10
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw02 {
  ipaddr = 10.10.40.1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw01 {
  ipaddr = 10.10.30.1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw04 {
  ipaddr = 10.10.50.1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw07 {
  ipaddr = 10.10.60.1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw05 {
  ipaddr = 192.168.21.254
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
 # Creating Auth-Type = ntlm_auth
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/freeradius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/freeradius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  filename = "/var/log/freeradius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/freeradius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/Ã¤Ã©Ã¶Ã¼Ã Ã¢Ã¦Ã§Ã¨Ã©ÃªÃ«Ã®Ã¯Ã´Å“Ã¹Ã»Ã¼aÃ¿Ã„Ã‰Ã–ÃœÃŸÃ€Ã‚Ã†Ã‡ÃˆÃ‰ÃŠÃ‹ÃŽÃ
Ã”Å’Ã™Ã›ÃœÅ¸"
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  detail {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/usr/bin/ntlm_auth --request-nt-key --domain=GP.VIEL
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_digest
  # Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  instantiate {
  }
  # Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): Initialising connection pool
   pool {
    start = 5
    min = 3
    max = 32
    spare = 10
    uses = 0
    lifetime = 86400
    cleanup_interval = 300
    idle_timeout = 600
    retry_delay = 30
    spread = no
   }
rlm_mschap (mschap): Opening additional connection (0), 1 of 32 pending
slots used
rlm_mschap (mschap): Opening additional connection (1), 1 of 31 pending
slots used
rlm_mschap (mschap): Opening additional connection (2), 1 of 30 pending
slots used
rlm_mschap (mschap): Opening additional connection (3), 1 of 29 pending
slots used
rlm_mschap (mschap): Opening additional connection (4), 1 of 28 pending
slots used
rlm_mschap (mschap): authenticating directly to winbind
  # Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/freeradius/3.0/certs"
    pem_file_type = yes
    private_key_file = "/etc/freeradius/3.0/certs/mykey.pem"
    certificate_file = "/etc/freeradius/3.0/certs/certificate.pem"
    ca_file = "/etc/freeradius/3.0/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/freeradius/3.0/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    tls_max_version = ""
    tls_min_version = "1.0"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/3.0/sites-enabled/inner-tunnel:353
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server wifi-clients { # from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server wifi-clients
server vpn { # from file /etc/freeradius/3.0/sites-enabled/vpn
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server vpn
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 58077
Listening on proxy address :: port 56627
Ready to process requests
(0) Received Access-Request Id 237 from 10.10.10.10:57160 to 10.10.8.43:1812
length 180
(0)   User-Name = "host/PC06820.example.com"
(0)   NAS-Identifier = "wifi"
(0)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(0)   NAS-Port-Type = Wireless-802.11
(0)   NAS-Port = 1
(0)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(0)   Connect-Info = "CONNECT 54Mbps 802.11g"
(0)   Framed-MTU = 1400
(0)   EAP-Message =
0x028c001c01686f73742f504330363832302e67702e7669656c2e6465
(0)   Message-Authenticator = 0x4d2aa1836af04945475d99a3b0aebd73
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     if (NAS-Identifier == "wifi") {
(0)     if (NAS-Identifier == "wifi")  -> TRUE
(0)     if (NAS-Identifier == "wifi")  {
(0)       update control {
(0)         Home-Server-Pool := "wifi-clients-pool"
(0)       } # update control = noop
(0)     } # if (NAS-Identifier == "wifi")  = noop
(0)     if (NAS-Identifier == "l2tp") {
(0)     if (NAS-Identifier == "l2tp")  -> FALSE
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = noop
(0)     } # policy filter_username = noop
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 140 length 28
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 141 length 22
(0) eap: EAP session adding &reply:State = 0x5e51316b5edc3578
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 237 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(0)   EAP-Message = 0x018d00160410974a533dad48c1d38b10bada2f39934e
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x5e51316b5edc35788145ae0a6b335879
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 238 from 10.10.10.10:57160 to 10.10.8.43:1812
length 176
(1)   User-Name = "host/PC06820.example.com"
(1)   NAS-Identifier = "wifi"
(1)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(1)   NAS-Port-Type = Wireless-802.11
(1)   NAS-Port = 1
(1)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(1)   Connect-Info = "CONNECT 54Mbps 802.11g"
(1)   Framed-MTU = 1400
(1)   EAP-Message = 0x028d00060319
(1)   State = 0x5e51316b5edc35788145ae0a6b335879
(1)   Message-Authenticator = 0x4bc7a62d6f9c53d3ad9fdfac2c98c4dc
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     if (NAS-Identifier == "wifi") {
(1)     if (NAS-Identifier == "wifi")  -> TRUE
(1)     if (NAS-Identifier == "wifi")  {
(1)       update control {
(1)         Home-Server-Pool := "wifi-clients-pool"
(1)       } # update control = noop
(1)     } # if (NAS-Identifier == "wifi")  = noop
(1)     if (NAS-Identifier == "l2tp") {
(1)     if (NAS-Identifier == "l2tp")  -> FALSE
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = noop
(1)     } # policy filter_username = noop
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 141 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1)     policy ntlm_auth.authorize {
(1)       if (!control:Auth-Type && User-Password) {
(1)       if (!control:Auth-Type && User-Password)  -> FALSE
(1)     } # policy ntlm_auth.authorize = updated
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x5e51316b5edc3578
(1) eap: Finished EAP session with state 0x5e51316b5edc3578
(1) eap: Previous EAP request found for state 0x5e51316b5edc3578, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 142 length 6
(1) eap: EAP session adding &reply:State = 0x5e51316b5fdf2878
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 238 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(1)   EAP-Message = 0x018e00061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x5e51316b5fdf28788145ae0a6b335879
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 239 from 10.10.10.10:57160 to 10.10.8.43:1812
length 336
(2)   User-Name = "host/PC06820.example.com"
(2)   NAS-Identifier = "wifi"
(2)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(2)   NAS-Port-Type = Wireless-802.11
(2)   NAS-Port = 1
(2)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(2)   Connect-Info = "CONNECT 54Mbps 802.11g"
(2)   Framed-MTU = 1400
(2)   EAP-Message =
0x028e00a619800000009c16030300970100009303035eb18e44d04b3f65371e591dbecbbbf82cda5aed364ca0da3d0d8f7f52d5c3fe00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d
(2)   State = 0x5e51316b5fdf28788145ae0a6b335879
(2)   Message-Authenticator = 0x1f7cac4d86400e0d036321291cf4d622
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     if (NAS-Identifier == "wifi") {
(2)     if (NAS-Identifier == "wifi")  -> TRUE
(2)     if (NAS-Identifier == "wifi")  {
(2)       update control {
(2)         Home-Server-Pool := "wifi-clients-pool"
(2)       } # update control = noop
(2)     } # if (NAS-Identifier == "wifi")  = noop
(2)     if (NAS-Identifier == "l2tp") {
(2)     if (NAS-Identifier == "l2tp")  -> FALSE
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = noop
(2)     } # policy filter_username = noop
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 142 length 166
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x5e51316b5fdf2878
(2) eap: Finished EAP session with state 0x5e51316b5fdf2878
(2) eap: Previous EAP request found for state 0x5e51316b5fdf2878, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 156 bytes
(2) eap_peap: Got complete TLS record (156 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 0097]
(2) eap_peap: TLS_accept: SSLv3/TLS read client hello
(2) eap_peap: >>> send TLS 1.2  [length 003d]
(2) eap_peap: TLS_accept: SSLv3/TLS write server hello
(2) eap_peap: >>> send TLS 1.2  [length 09dd]
(2) eap_peap: TLS_accept: SSLv3/TLS write certificate
(2) eap_peap: >>> send TLS 1.2  [length 014d]
(2) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(2) eap_peap: >>> send TLS 1.2  [length 0004]
(2) eap_peap: TLS_accept: SSLv3/TLS write server done
(2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server
done
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 143 length 1004
(2) eap: EAP session adding &reply:State = 0x5e51316b5cde2878
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 239 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(2)   EAP-Message =
0x018f03ec19c000000b7f160303003d02000039030305646e7d7dd9e65e890551dfe8987962d49032a4e59baaaeab578aeec0c328f800c030000011ff01000100000b0004030001020017000016030309dd0b0009d90009d60006303082062c30820514a0030201020213460000009bc8cd1dbbd3313db6
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x5e51316b5cde28788145ae0a6b335879
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 240 from 10.10.10.10:57160 to 10.10.8.43:1812
length 176
(3)   User-Name = "host/PC06820.example.com"
(3)   NAS-Identifier = "wifi"
(3)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(3)   NAS-Port-Type = Wireless-802.11
(3)   NAS-Port = 1
(3)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(3)   Connect-Info = "CONNECT 54Mbps 802.11g"
(3)   Framed-MTU = 1400
(3)   EAP-Message = 0x028f00061900
(3)   State = 0x5e51316b5cde28788145ae0a6b335879
(3)   Message-Authenticator = 0x86ca96d94b0a09e53d9b5696e1c6ee25
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     if (NAS-Identifier == "wifi") {
(3)     if (NAS-Identifier == "wifi")  -> TRUE
(3)     if (NAS-Identifier == "wifi")  {
(3)       update control {
(3)         Home-Server-Pool := "wifi-clients-pool"
(3)       } # update control = noop
(3)     } # if (NAS-Identifier == "wifi")  = noop
(3)     if (NAS-Identifier == "l2tp") {
(3)     if (NAS-Identifier == "l2tp")  -> FALSE
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = noop
(3)     } # policy filter_username = noop
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 143 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x5e51316b5cde2878
(3) eap: Finished EAP session with state 0x5e51316b5cde2878
(3) eap: Previous EAP request found for state 0x5e51316b5cde2878, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 144 length 1000
(3) eap: EAP session adding &reply:State = 0x5e51316b5dc12878
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 240 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(3)   EAP-Message =
0x019003e819406e506f696e74862b687474703a2f2f706b692e67702e7669656c2e64652f706b692f67702d53562d444330322d43412e63726c3082010f06082b06010505070101048201013081fe3081ae06082b060105050730028681a16c6461703a2f2f2f434e3d67702d53562d444330322d43412c
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x5e51316b5dc128788145ae0a6b335879
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 241 from 10.10.10.10:57160 to 10.10.8.43:1812
length 176
(4)   User-Name = "host/PC06820.example.com"
(4)   NAS-Identifier = "wifi"
(4)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(4)   NAS-Port-Type = Wireless-802.11
(4)   NAS-Port = 1
(4)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(4)   Connect-Info = "CONNECT 54Mbps 802.11g"
(4)   Framed-MTU = 1400
(4)   EAP-Message = 0x029000061900
(4)   State = 0x5e51316b5dc128788145ae0a6b335879
(4)   Message-Authenticator = 0x89c433b521d79323ed524046bb9be860
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     if (NAS-Identifier == "wifi") {
(4)     if (NAS-Identifier == "wifi")  -> TRUE
(4)     if (NAS-Identifier == "wifi")  {
(4)       update control {
(4)         Home-Server-Pool := "wifi-clients-pool"
(4)       } # update control = noop
(4)     } # if (NAS-Identifier == "wifi")  = noop
(4)     if (NAS-Identifier == "l2tp") {
(4)     if (NAS-Identifier == "l2tp")  -> FALSE
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = noop
(4)     } # policy filter_username = noop
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 144 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x5e51316b5dc12878
(4) eap: Finished EAP session with state 0x5e51316b5dc12878
(4) eap: Previous EAP request found for state 0x5e51316b5dc12878, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 145 length 961
(4) eap: EAP session adding &reply:State = 0x5e51316b5ac02878
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 241 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(4)   EAP-Message =
0x019103c119000de709ec58e62837b2993411cdbde5dd2b988bc253e59b4df0452cf308122202c6e04affb51e178d9c4407f483a5314a96878b11f3b2d1fbd12cf389997cc8d0be34647894e48d50bd337004b43349a901f030cb526c95708d5c946843f1a8b49dc916a147b8dc8c60436774b32137bdc5
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x5e51316b5ac028788145ae0a6b335879
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 242 from 10.10.10.10:57160 to 10.10.8.43:1812
length 306
(5)   User-Name = "host/PC06820.example.com"
(5)   NAS-Identifier = "wifi"
(5)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(5)   NAS-Port-Type = Wireless-802.11
(5)   NAS-Port = 1
(5)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(5)   Connect-Info = "CONNECT 54Mbps 802.11g"
(5)   Framed-MTU = 1400
(5)   EAP-Message =
0x0291008819800000007e1603030046100000424104f73d093de91fc3ace997fd5366f168380b3a8d420e28d9f635c70e4f994fea76edc5d601141c794ead4b5ea5b4110dde6c982e75345a7e695684195d4fc760be14030300010116030300280000000000000000934d862861461cc184dd66122d1404
(5)   State = 0x5e51316b5ac028788145ae0a6b335879
(5)   Message-Authenticator = 0xcd1f8be4db6981050654ce234a0dc362
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     if (NAS-Identifier == "wifi") {
(5)     if (NAS-Identifier == "wifi")  -> TRUE
(5)     if (NAS-Identifier == "wifi")  {
(5)       update control {
(5)         Home-Server-Pool := "wifi-clients-pool"
(5)       } # update control = noop
(5)     } # if (NAS-Identifier == "wifi")  = noop
(5)     if (NAS-Identifier == "l2tp") {
(5)     if (NAS-Identifier == "l2tp")  -> FALSE
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = noop
(5)     } # policy filter_username = noop
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 145 length 136
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x5e51316b5ac02878
(5) eap: Finished EAP session with state 0x5e51316b5ac02878
(5) eap: Previous EAP request found for state 0x5e51316b5ac02878, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(5) eap_peap: Got complete TLS record (126 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: TLS_accept: SSLv3/TLS write server done
(5) eap_peap: <<< recv TLS 1.2  [length 0046]
(5) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(5) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(5) eap_peap: <<< recv TLS 1.2  [length 0010]
(5) eap_peap: TLS_accept: SSLv3/TLS read finished
(5) eap_peap: >>> send TLS 1.2  [length 0001]
(5) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(5) eap_peap: >>> send TLS 1.2  [length 0010]
(5) eap_peap: TLS_accept: SSLv3/TLS write finished
(5) eap_peap: (other): SSL negotiation finished successfully
(5) eap_peap: SSL Connection Established
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 146 length 57
(5) eap: EAP session adding &reply:State = 0x5e51316b5bc32878
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 242 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(5)   EAP-Message =
0x0192003919001403030001011603030028ea18c95cd37de77375a8409931448d30a669d35d71ef514cc8113319438b861347ec2dcbae19fbd2
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x5e51316b5bc328788145ae0a6b335879
(5) Finished request
Waking up in 4.8 seconds.
(6) Received Access-Request Id 243 from 10.10.10.10:57160 to 10.10.8.43:1812
length 176
(6)   User-Name = "host/PC06820.example.com"
(6)   NAS-Identifier = "wifi"
(6)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(6)   NAS-Port-Type = Wireless-802.11
(6)   NAS-Port = 1
(6)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(6)   Connect-Info = "CONNECT 54Mbps 802.11g"
(6)   Framed-MTU = 1400
(6)   EAP-Message = 0x029200061900
(6)   State = 0x5e51316b5bc328788145ae0a6b335879
(6)   Message-Authenticator = 0x95fb73155782147ca4a6007d09e9595f
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     if (NAS-Identifier == "wifi") {
(6)     if (NAS-Identifier == "wifi")  -> TRUE
(6)     if (NAS-Identifier == "wifi")  {
(6)       update control {
(6)         Home-Server-Pool := "wifi-clients-pool"
(6)       } # update control = noop
(6)     } # if (NAS-Identifier == "wifi")  = noop
(6)     if (NAS-Identifier == "l2tp") {
(6)     if (NAS-Identifier == "l2tp")  -> FALSE
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = noop
(6)     } # policy filter_username = noop
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 146 length 6
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x5e51316b5bc32878
(6) eap: Finished EAP session with state 0x5e51316b5bc32878
(6) eap: Previous EAP request found for state 0x5e51316b5bc32878, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(6) eap_peap: [eaptls verify] = success
(6) eap_peap: [eaptls process] = success
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state TUNNEL ESTABLISHED
(6) eap: Sending EAP Request (code 1) ID 147 length 40
(6) eap: EAP session adding &reply:State = 0x5e51316b58c22878
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 243 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(6)   EAP-Message =
0x019300281900170303001dea18c95cd37de7741c1f033d3690de5ebf9c3014c7ebc2d98c1efe6dfc
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x5e51316b58c228788145ae0a6b335879
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 244 from 10.10.10.10:57160 to 10.10.8.43:1812
length 229
(7)   User-Name = "host/PC06820.example.com"
(7)   NAS-Identifier = "wifi"
(7)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(7)   NAS-Port-Type = Wireless-802.11
(7)   NAS-Port = 1
(7)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(7)   Connect-Info = "CONNECT 54Mbps 802.11g"
(7)   Framed-MTU = 1400
(7)   EAP-Message =
0x0293003b1900170303003000000000000000013ac5e121636f637adab894280c3c70b36a6a97df20a3763e0235e4901dc8803dd2d28fdb7e6c9eb2
(7)   State = 0x5e51316b58c228788145ae0a6b335879
(7)   Message-Authenticator = 0x1a41158a0b11c1f6ac381eee74d27cda
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(7)   authorize {
(7)     if (NAS-Identifier == "wifi") {
(7)     if (NAS-Identifier == "wifi")  -> TRUE
(7)     if (NAS-Identifier == "wifi")  {
(7)       update control {
(7)         Home-Server-Pool := "wifi-clients-pool"
(7)       } # update control = noop
(7)     } # if (NAS-Identifier == "wifi")  = noop
(7)     if (NAS-Identifier == "l2tp") {
(7)     if (NAS-Identifier == "l2tp")  -> FALSE
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = noop
(7)     } # policy filter_username = noop
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 147 length 59
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x5e51316b58c22878
(7) eap: Finished EAP session with state 0x5e51316b58c22878
(7) eap: Previous EAP request found for state 0x5e51316b58c22878, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(7) eap_peap: Identity - host/PC06820.example.com
(7) eap_peap: Got inner identity 'host/PC06820.example.com'
(7) eap_peap: Setting default EAP type for tunneled EAP session
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message =
0x0293001c01686f73742f504330363832302e67702e7669656c2e6465
(7) eap_peap: Setting User-Name to host/PC06820.example.com
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap:   EAP-Message =
0x0293001c01686f73742f504330363832302e67702e7669656c2e6465
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "host/PC06820.example.com"
(7) Virtual server inner-tunnel received request
(7)   EAP-Message =
0x0293001c01686f73742f504330363832302e67702e7669656c2e6465
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "host/PC06820.example.com"
(7) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(7) server inner-tunnel {
(7)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authorize {
(7)       if (NAS-Identifier == "wifi") {
(7)       ERROR: Failed retrieving values required to evaluate condition
(7)       if (NAS-Identifier == "l2tp") {
(7)       ERROR: Failed retrieving values required to evaluate condition
(7)       policy filter_username {
(7)         if (&User-Name) {
(7)         if (&User-Name)  -> TRUE
(7)         if (&User-Name)  {
(7)           if (&User-Name =~ / /) {
(7)           if (&User-Name =~ / /)  -> FALSE
(7)           if (&User-Name =~ /@[^@]*@/ ) {
(7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)           if (&User-Name =~ /\.\./ ) {
(7)           if (&User-Name =~ /\.\./ )  -> FALSE
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7)           if (&User-Name =~ /\.$/)  {
(7)           if (&User-Name =~ /\.$/)   -> FALSE
(7)           if (&User-Name =~ /@\./)  {
(7)           if (&User-Name =~ /@\./)   -> FALSE
(7)         } # if (&User-Name)  = notfound
(7)       } # policy filter_username = notfound
(7)       [chap] = noop
(7)       [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(7) suffix: No such realm "NULL"
(7)       [suffix] = noop
(7)       update control {
(7)         &Proxy-To-Realm := LOCAL
(7)       } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 147 length 28
(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(7)       [eap] = ok
(7)     } # authorize = ok
(7)   Found Auth-Type = eap
(7)   # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7)     authenticate {
(7) eap: Peer sent packet with method EAP Identity (1)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: Issuing Challenge
(7) eap: Sending EAP Request (code 1) ID 148 length 43
(7) eap: EAP session adding &reply:State = 0x73d6eaa27342f033
(7)       [eap] = handled
(7)     } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7)   EAP-Message =
0x0194002b1a01940026108e81c1dc719cb5a6dc04ab3e717fb3f8667265657261646975732d332e302e3136
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x73d6eaa27342f0333f753f1347dd3ef1
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap:   EAP-Message =
0x0194002b1a01940026108e81c1dc719cb5a6dc04ab3e717fb3f8667265657261646975732d332e302e3136
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x73d6eaa27342f0333f753f1347dd3ef1
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap:   EAP-Message =
0x0194002b1a01940026108e81c1dc719cb5a6dc04ab3e717fb3f8667265657261646975732d332e302e3136
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0x73d6eaa27342f0333f753f1347dd3ef1
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 148 length 74
(7) eap: EAP session adding &reply:State = 0x5e51316b59c52878
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 244 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(7)   EAP-Message =
0x0194004a1900170303003fea18c95cd37de77590b9308a5dc3c0d13fd62e65f5e248cc907aecb057ea43f68178d1074e3f1520426d36799bf872c830cf0c68d1e5b12b604e6585a64235
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x5e51316b59c528788145ae0a6b335879
(7) Finished request
Waking up in 4.8 seconds.
(8) Received Access-Request Id 245 from 10.10.10.10:57160 to 10.10.8.43:1812
length 283
(8)   User-Name = "host/PC06820.example.com"
(8)   NAS-Identifier = "wifi"
(8)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(8)   NAS-Port-Type = Wireless-802.11
(8)   NAS-Port = 1
(8)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(8)   Connect-Info = "CONNECT 54Mbps 802.11g"
(8)   Framed-MTU = 1400
(8)   EAP-Message =
0x029400711900170303006600000000000000020576e39e705a6555abcc41cff88cf583ad668129f7fac93e6fe42e849f7866b4d85befe3c5e1ad30451a25dc0ea48716d4d51538423d41369925c918221c6d695d6e8099460ae640b62dfabcf328561b3b5604ee2e8a842b81e91adaa0cd
(8)   State = 0x5e51316b59c528788145ae0a6b335879
(8)   Message-Authenticator = 0x44073011f5be0bc02c2a0439c4eeab5c
(8) session-state: No cached attributes
(8) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(8)   authorize {
(8)     if (NAS-Identifier == "wifi") {
(8)     if (NAS-Identifier == "wifi")  -> TRUE
(8)     if (NAS-Identifier == "wifi")  {
(8)       update control {
(8)         Home-Server-Pool := "wifi-clients-pool"
(8)       } # update control = noop
(8)     } # if (NAS-Identifier == "wifi")  = noop
(8)     if (NAS-Identifier == "l2tp") {
(8)     if (NAS-Identifier == "l2tp")  -> FALSE
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = noop
(8)     } # policy filter_username = noop
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 148 length 113
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0x73d6eaa27342f033
(8) eap: Finished EAP session with state 0x5e51316b59c52878
(8) eap: Previous EAP request found for state 0x5e51316b59c52878, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap:   EAP-Message =
0x029400521a0294004d318bed1ddb66ac4a3b18f70c8c1d4cf465000000000000000003aa17ba22c8d0982d367e0f5870eff0a1ab5549a3322e6300686f73742f504330363832302e67702e7669656c2e6465
(8) eap_peap: Setting User-Name to host/PC06820.example.com
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap:   EAP-Message =
0x029400521a0294004d318bed1ddb66ac4a3b18f70c8c1d4cf465000000000000000003aa17ba22c8d0982d367e0f5870eff0a1ab5549a3322e6300686f73742f504330363832302e67702e7669656c2e6465
(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap:   User-Name = "host/PC06820.example.com"
(8) eap_peap:   State = 0x73d6eaa27342f0333f753f1347dd3ef1
(8) Virtual server inner-tunnel received request
(8)   EAP-Message =
0x029400521a0294004d318bed1ddb66ac4a3b18f70c8c1d4cf465000000000000000003aa17ba22c8d0982d367e0f5870eff0a1ab5549a3322e6300686f73742f504330363832302e67702e7669656c2e6465
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "host/PC06820.example.com"
(8)   State = 0x73d6eaa27342f0333f753f1347dd3ef1
(8) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(8) server inner-tunnel {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8)     authorize {
(8)       if (NAS-Identifier == "wifi") {
(8)       ERROR: Failed retrieving values required to evaluate condition
(8)       if (NAS-Identifier == "l2tp") {
(8)       ERROR: Failed retrieving values required to evaluate condition
(8)       policy filter_username {
(8)         if (&User-Name) {
(8)         if (&User-Name)  -> TRUE
(8)         if (&User-Name)  {
(8)           if (&User-Name =~ / /) {
(8)           if (&User-Name =~ / /)  -> FALSE
(8)           if (&User-Name =~ /@[^@]*@/ ) {
(8)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)           if (&User-Name =~ /\.\./ ) {
(8)           if (&User-Name =~ /\.\./ )  -> FALSE
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8)           if (&User-Name =~ /\.$/)  {
(8)           if (&User-Name =~ /\.$/)   -> FALSE
(8)           if (&User-Name =~ /@\./)  {
(8)           if (&User-Name =~ /@\./)   -> FALSE
(8)         } # if (&User-Name)  = notfound
(8)       } # policy filter_username = notfound
(8)       [chap] = noop
(8)       [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(8) suffix: No such realm "NULL"
(8)       [suffix] = noop
(8)       update control {
(8)         &Proxy-To-Realm := LOCAL
(8)       } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 148 length 82
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [eap] = updated
(8)       [files] = noop
(8)       [expiration] = noop
(8)       [logintime] = noop
(8)       [pap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = eap
(8)   # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8)     authenticate {
(8) eap: Expiring EAP session with state 0x73d6eaa27342f033
(8) eap: Finished EAP session with state 0x73d6eaa27342f033
(8) eap: Previous EAP request found for state 0x73d6eaa27342f033, released
from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(8) eap_mschapv2:   authenticate {
(8) mschap: Creating challenge hash with username: host/PC06820.example.com
(8) mschap: Client is using MS-CHAPv2
(8) mschap: EXPAND %{mschap:User-Name}
(8) mschap:    --> PC06820$
rlm_mschap (mschap): Reserved connection (0)
(8) mschap: sending authentication request user='PC06820$' domain='GP.VIEL'
rlm_mschap (mschap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_mschap (mschap): Opening additional connection (5), 1 of 27 pending
slots used
(8) mschap: Authenticated successfully
(8) mschap: Adding MS-CHAPv2 MPPE keys
(8)     [mschap] = ok
(8)   } # authenticate = ok
(8) MSCHAP Success
(8) eap: Sending EAP Request (code 1) ID 149 length 51
(8) eap: EAP session adding &reply:State = 0x73d6eaa27243f033
(8)       [eap] = handled
(8)     } # authenticate = handled
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8)   EAP-Message =
0x019500331a0394002e533d33383337354431354345383645334343323632393838304637344245313235353231323942313341
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x73d6eaa27243f0333f753f1347dd3ef1
(8) eap_peap: Got tunneled reply code 11
(8) eap_peap:   EAP-Message =
0x019500331a0394002e533d33383337354431354345383645334343323632393838304637344245313235353231323942313341
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   State = 0x73d6eaa27243f0333f753f1347dd3ef1
(8) eap_peap: Got tunneled reply RADIUS code 11
(8) eap_peap:   EAP-Message =
0x019500331a0394002e533d33383337354431354345383645334343323632393838304637344245313235353231323942313341
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   State = 0x73d6eaa27243f0333f753f1347dd3ef1
(8) eap_peap: Got tunneled Access-Challenge
(8) eap: Sending EAP Request (code 1) ID 149 length 82
(8) eap: EAP session adding &reply:State = 0x5e51316b56c42878
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   Challenge { ... } # empty sub-section is ignored
(8) Sent Access-Challenge Id 245 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(8)   EAP-Message =
0x0195005219001703030047ea18c95cd37de776ecbe79e711ce8d2c7cec1c0e527fcf9d34c8a2d196b8bab68697cd9fd3e8fc7b8376cf3bb798edec62324e820eec7f538344013847ab2ab565325cfba96d52
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x5e51316b56c428788145ae0a6b335879
(8) Finished request
Waking up in 4.8 seconds.
(9) Received Access-Request Id 246 from 10.10.10.10:57160 to 10.10.8.43:1812
length 207
(9)   User-Name = "host/PC06820.example.com"
(9)   NAS-Identifier = "wifi"
(9)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(9)   NAS-Port-Type = Wireless-802.11
(9)   NAS-Port = 1
(9)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(9)   Connect-Info = "CONNECT 54Mbps 802.11g"
(9)   Framed-MTU = 1400
(9)   EAP-Message =
0x029500251900170303001a0000000000000003570c069dfd1675237fac367a5185ff32c595
(9)   State = 0x5e51316b56c428788145ae0a6b335879
(9)   Message-Authenticator = 0x9626d6b625d128bfc8588ac44f2a148a
(9) session-state: No cached attributes
(9) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(9)   authorize {
(9)     if (NAS-Identifier == "wifi") {
(9)     if (NAS-Identifier == "wifi")  -> TRUE
(9)     if (NAS-Identifier == "wifi")  {
(9)       update control {
(9)         Home-Server-Pool := "wifi-clients-pool"
(9)       } # update control = noop
(9)     } # if (NAS-Identifier == "wifi")  = noop
(9)     if (NAS-Identifier == "l2tp") {
(9)     if (NAS-Identifier == "l2tp")  -> FALSE
(9)     policy filter_username {
(9)       if (&User-Name) {
(9)       if (&User-Name)  -> TRUE
(9)       if (&User-Name)  {
(9)         if (&User-Name =~ / /) {
(9)         if (&User-Name =~ / /)  -> FALSE
(9)         if (&User-Name =~ /@[^@]*@/ ) {
(9)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)         if (&User-Name =~ /\.\./ ) {
(9)         if (&User-Name =~ /\.\./ )  -> FALSE
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(9)         if (&User-Name =~ /\.$/)  {
(9)         if (&User-Name =~ /\.$/)   -> FALSE
(9)         if (&User-Name =~ /@\./)  {
(9)         if (&User-Name =~ /@\./)   -> FALSE
(9)       } # if (&User-Name)  = noop
(9)     } # policy filter_username = noop
(9)     [preprocess] = ok
(9)     [chap] = noop
(9)     [mschap] = noop
(9)     [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(9) suffix: No such realm "NULL"
(9)     [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 149 length 37
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(9)   authenticate {
(9) eap: Expiring EAP session with state 0x73d6eaa27243f033
(9) eap: Finished EAP session with state 0x5e51316b56c42878
(9) eap: Previous EAP request found for state 0x5e51316b56c42878, released
from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established.  Decoding tunneled attributes
(9) eap_peap: PEAP state phase2
(9) eap_peap: EAP method MSCHAPv2 (26)
(9) eap_peap: Got tunneled request
(9) eap_peap:   EAP-Message = 0x029500061a03
(9) eap_peap: Setting User-Name to host/PC06820.example.com
(9) eap_peap: Sending tunneled request to inner-tunnel
(9) eap_peap:   EAP-Message = 0x029500061a03
(9) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(9) eap_peap:   User-Name = "host/PC06820.example.com"
(9) eap_peap:   State = 0x73d6eaa27243f0333f753f1347dd3ef1
(9) Virtual server inner-tunnel received request
(9)   EAP-Message = 0x029500061a03
(9)   FreeRADIUS-Proxied-To = 127.0.0.1
(9)   User-Name = "host/PC06820.example.com"
(9)   State = 0x73d6eaa27243f0333f753f1347dd3ef1
(9) WARNING: Outer and inner identities are the same.  User privacy is
compromised.
(9) server inner-tunnel {
(9)   session-state: No cached attributes
(9)   # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(9)     authorize {
(9)       if (NAS-Identifier == "wifi") {
(9)       ERROR: Failed retrieving values required to evaluate condition
(9)       if (NAS-Identifier == "l2tp") {
(9)       ERROR: Failed retrieving values required to evaluate condition
(9)       policy filter_username {
(9)         if (&User-Name) {
(9)         if (&User-Name)  -> TRUE
(9)         if (&User-Name)  {
(9)           if (&User-Name =~ / /) {
(9)           if (&User-Name =~ / /)  -> FALSE
(9)           if (&User-Name =~ /@[^@]*@/ ) {
(9)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(9)           if (&User-Name =~ /\.\./ ) {
(9)           if (&User-Name =~ /\.\./ )  -> FALSE
(9)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(9)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(9)           if (&User-Name =~ /\.$/)  {
(9)           if (&User-Name =~ /\.$/)   -> FALSE
(9)           if (&User-Name =~ /@\./)  {
(9)           if (&User-Name =~ /@\./)   -> FALSE
(9)         } # if (&User-Name)  = notfound
(9)       } # policy filter_username = notfound
(9)       [chap] = noop
(9)       [mschap] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(9) suffix: No such realm "NULL"
(9)       [suffix] = noop
(9)       update control {
(9)         &Proxy-To-Realm := LOCAL
(9)       } # update control = noop
(9) eap: Peer sent EAP Response (code 2) ID 149 length 6
(9) eap: No EAP Start, assuming it's an on-going EAP conversation
(9)       [eap] = updated
(9)       [files] = noop
(9)       [expiration] = noop
(9)       [logintime] = noop
(9)       [pap] = noop
(9)     } # authorize = updated
(9)   Found Auth-Type = eap
(9)   # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(9)     authenticate {
(9) eap: Expiring EAP session with state 0x73d6eaa27243f033
(9) eap: Finished EAP session with state 0x73d6eaa27243f033
(9) eap: Previous EAP request found for state 0x73d6eaa27243f033, released
from the list
(9) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(9) eap: Calling submodule eap_mschapv2 to process data
(9) eap: Sending EAP Success (code 3) ID 149 length 4
(9) eap: Freeing handler
(9)       [eap] = ok
(9)     } # authenticate = ok
(9)   # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(9)     post-auth {
(9)       if (0) {
(9)       if (0)  -> FALSE
(9)     } # post-auth = noop
(9) } # server inner-tunnel
(9) Virtual server sending reply
(9)   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9)   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9)   MS-MPPE-Send-Key = 0x8211c970608352c6e9fa63a3d47b5904
(9)   MS-MPPE-Recv-Key = 0xfb0e576ca3f9b4cc296423b66446606f
(9)   EAP-Message = 0x03950004
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   User-Name = "host/PC06820.example.com"
(9) eap_peap: Got tunneled reply code 2
(9) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9) eap_peap:   MS-MPPE-Send-Key = 0x8211c970608352c6e9fa63a3d47b5904
(9) eap_peap:   MS-MPPE-Recv-Key = 0xfb0e576ca3f9b4cc296423b66446606f
(9) eap_peap:   EAP-Message = 0x03950004
(9) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap:   User-Name = "host/PC06820.example.com"
(9) eap_peap: Got tunneled reply RADIUS code 2
(9) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(9) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(9) eap_peap:   MS-MPPE-Send-Key = 0x8211c970608352c6e9fa63a3d47b5904
(9) eap_peap:   MS-MPPE-Recv-Key = 0xfb0e576ca3f9b4cc296423b66446606f
(9) eap_peap:   EAP-Message = 0x03950004
(9) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap:   User-Name = "host/PC06820.example.com"
(9) eap_peap: Tunneled authentication was successful
(9) eap_peap: SUCCESS
(9) eap: Sending EAP Request (code 1) ID 150 length 46
(9) eap: EAP session adding &reply:State = 0x5e51316b57c72878
(9)     [eap] = handled
(9)   } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(9)   Challenge { ... } # empty sub-section is ignored
(9) Sent Access-Challenge Id 246 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(9)   EAP-Message =
0x0196002e19001703030023ea18c95cd37de7770fdb6426fd7f939e14b507e6ade4bb0dc9e72903001142807eca98
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9)   State = 0x5e51316b57c728788145ae0a6b335879
(9) Finished request
Waking up in 4.7 seconds.
(10) Received Access-Request Id 247 from 10.10.10.10:57160 to
10.10.8.43:1812 length 216
(10)   User-Name = "host/PC06820.example.com"
(10)   NAS-Identifier = "wifi"
(10)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(10)   NAS-Port-Type = Wireless-802.11
(10)   NAS-Port = 1
(10)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(10)   Connect-Info = "CONNECT 54Mbps 802.11g"
(10)   Framed-MTU = 1400
(10)   EAP-Message =
0x0296002e190017030300230000000000000004f22bfe8c72b2bccc5b493c3323112b025993cefd0c89460dbf04ee
(10)   State = 0x5e51316b57c728788145ae0a6b335879
(10)   Message-Authenticator = 0xd691aed06663dd9f3ab08aee1964cf75
(10) session-state: No cached attributes
(10) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(10)   authorize {
(10)     if (NAS-Identifier == "wifi") {
(10)     if (NAS-Identifier == "wifi")  -> TRUE
(10)     if (NAS-Identifier == "wifi")  {
(10)       update control {
(10)         Home-Server-Pool := "wifi-clients-pool"
(10)       } # update control = noop
(10)     } # if (NAS-Identifier == "wifi")  = noop
(10)     if (NAS-Identifier == "l2tp") {
(10)     if (NAS-Identifier == "l2tp")  -> FALSE
(10)     policy filter_username {
(10)       if (&User-Name) {
(10)       if (&User-Name)  -> TRUE
(10)       if (&User-Name)  {
(10)         if (&User-Name =~ / /) {
(10)         if (&User-Name =~ / /)  -> FALSE
(10)         if (&User-Name =~ /@[^@]*@/ ) {
(10)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(10)         if (&User-Name =~ /\.\./ ) {
(10)         if (&User-Name =~ /\.\./ )  -> FALSE
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(10)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(10)         if (&User-Name =~ /\.$/)  {
(10)         if (&User-Name =~ /\.$/)   -> FALSE
(10)         if (&User-Name =~ /@\./)  {
(10)         if (&User-Name =~ /@\./)   -> FALSE
(10)       } # if (&User-Name)  = noop
(10)     } # policy filter_username = noop
(10)     [preprocess] = ok
(10)     [chap] = noop
(10)     [mschap] = noop
(10)     [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(10) suffix: No such realm "NULL"
(10)     [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 150 length 46
(10) eap: Continuing tunnel setup
(10)     [eap] = ok
(10)   } # authorize = ok
(10) Found Auth-Type = eap
(10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(10)   authenticate {
(10) eap: Expiring EAP session with state 0x5e51316b57c72878
(10) eap: Finished EAP session with state 0x5e51316b57c72878
(10) eap: Previous EAP request found for state 0x5e51316b57c72878, released
from the list
(10) eap: Peer sent packet with method EAP PEAP (25)
(10) eap: Calling submodule eap_peap to process data
(10) eap_peap: Continuing EAP-TLS
(10) eap_peap: [eaptls verify] = ok
(10) eap_peap: Done initial handshake
(10) eap_peap: [eaptls process] = ok
(10) eap_peap: Session established.  Decoding tunneled attributes
(10) eap_peap: PEAP state send tlv success
(10) eap_peap: Received EAP-TLV response
(10) eap_peap: Success
(10) eap: Sending EAP Success (code 3) ID 150 length 4
(10) eap: Freeing handler
(10)     [eap] = ok
(10)   } # authenticate = ok
(10) # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/default
(10)   post-auth {
(10)     update {
(10)       No attributes updated
(10)     } # update = noop
(10)     [exec] = noop
(10)     policy remove_reply_message_if_eap {
(10)       if (&reply:EAP-Message && &reply:Reply-Message) {
(10)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(10)       else {
(10)         [noop] = noop
(10)       } # else = noop
(10)     } # policy remove_reply_message_if_eap = noop
(10)   } # post-auth = noop
(10) Sent Access-Accept Id 247 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(10)   MS-MPPE-Recv-Key =
0x079365360106572a0acb0616e57d73d1f14212409925d9612bc1740f3c2245e1
(10)   MS-MPPE-Send-Key =
0x3856a656b9b7c8623fdebad64b041bc8e08cda385569d0fe96affd1f6b67cf74
(10)   EAP-Message = 0x03960004
(10)   Message-Authenticator = 0x00000000000000000000000000000000
(10)   User-Name = "host/PC06820.example.com"
(10) Finished request
Waking up in 4.7 seconds.
(0) Cleaning up request packet ID 237 with timestamp +9
(1) Cleaning up request packet ID 238 with timestamp +9
(2) Cleaning up request packet ID 239 with timestamp +9
(3) Cleaning up request packet ID 240 with timestamp +9
(4) Cleaning up request packet ID 241 with timestamp +9
(5) Cleaning up request packet ID 242 with timestamp +9
(6) Cleaning up request packet ID 243 with timestamp +9
(7) Cleaning up request packet ID 244 with timestamp +9
(8) Cleaning up request packet ID 245 with timestamp +9
(9) Cleaning up request packet ID 246 with timestamp +9
(10) Cleaning up request packet ID 247 with timestamp +9
Ready to process requests

Listing 2:
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/ntlm_auth
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/eap
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/wifi-clients
including configuration file /etc/freeradius/3.0/sites-enabled/vpn
main {
 security {
  user = "freerad"
  group = "freerad"
  allow_core_dumps = no
 }
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server wifi-clients {
  virtual_server = "wifi-clients"
  port = 0
  type = "auth"
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server vpn {
  virtual_server = "vpn"
  port = 0
  type = "auth"
  response_window = 30.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "none"
  ping_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 300
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 home_server_pool wifi-clients-pool {
type = fail-over
home_server = wifi-clients
 }
 realm wifi-clients-realm {
auth_pool = wifi-clients-pool
nostrip
 }
 home_server_pool vpn-pool {
type = fail-over
home_server = vpn
 }
 realm vpn-realm {
auth_pool = vpn-pool
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw03 {
  ipaddr = 10.10.10.10
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw02 {
  ipaddr = 10.10.40.1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw01 {
  ipaddr = 10.10.30.1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw04 {
  ipaddr = 10.10.50.1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw07 {
  ipaddr = 10.10.60.1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client sv-fw05 {
  ipaddr = 192.168.21.254
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
 # Creating Auth-Type = ntlm_auth
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/freeradius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/freeradius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  filename = "/var/log/freeradius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/freeradius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/Ã¤Ã©Ã¶Ã¼Ã Ã¢Ã¦Ã§Ã¨Ã©ÃªÃ«Ã®Ã¯Ã´Å“Ã¹Ã»Ã¼aÃ¿Ã„Ã‰Ã–ÃœÃŸÃ€Ã‚Ã†Ã‡ÃˆÃ‰ÃŠÃ‹ÃŽÃ
Ã”Å’Ã™Ã›ÃœÅ¸"
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  detail {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/usr/bin/ntlm_auth --request-nt-key --domain=GP.VIEL
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_always
  # Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_digest
  # Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  instantiate {
  }
  # Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): Initialising connection pool
   pool {
    start = 5
    min = 3
    max = 32
    spare = 10
    uses = 0
    lifetime = 86400
    cleanup_interval = 300
    idle_timeout = 600
    retry_delay = 30
    spread = no
   }
rlm_mschap (mschap): Opening additional connection (0), 1 of 32 pending
slots used
rlm_mschap (mschap): Opening additional connection (1), 1 of 31 pending
slots used
rlm_mschap (mschap): Opening additional connection (2), 1 of 30 pending
slots used
rlm_mschap (mschap): Opening additional connection (3), 1 of 29 pending
slots used
rlm_mschap (mschap): Opening additional connection (4), 1 of 28 pending
slots used
rlm_mschap (mschap): authenticating directly to winbind
  # Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/freeradius/3.0/certs"
    pem_file_type = yes
    private_key_file = "/etc/freeradius/3.0/certs/mykey.pem"
    certificate_file = "/etc/freeradius/3.0/certs/certificate.pem"
    ca_file = "/etc/freeradius/3.0/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/freeradius/3.0/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    cipher_server_preference = no
    ecdh_curve = "prime256v1"
    tls_max_version = ""
    tls_min_version = "1.0"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/3.0/sites-enabled/inner-tunnel:353
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server wifi-clients { # from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server wifi-clients
server vpn { # from file /etc/freeradius/3.0/sites-enabled/vpn
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server vpn
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 42161
Listening on proxy address :: port 47802
Ready to process requests
(0) Received Access-Request Id 248 from 10.10.10.10:57160 to 10.10.8.43:1812
length 180
(0)   User-Name = "host/PC06820.example.com"
(0)   NAS-Identifier = "wifi"
(0)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(0)   NAS-Port-Type = Wireless-802.11
(0)   NAS-Port = 1
(0)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(0)   Connect-Info = "CONNECT 54Mbps 802.11g"
(0)   Framed-MTU = 1400
(0)   EAP-Message =
0x0201001c01686f73742f504330363832302e67702e7669656c2e6465
(0)   Message-Authenticator = 0x50812a4b43196de2d514e022692f83fe
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     if (NAS-Identifier == "wifi") {
(0)     if (NAS-Identifier == "wifi")  -> TRUE
(0)     if (NAS-Identifier == "wifi")  {
(0)       update control {
(0)         Proxy-To-Realm := "wifi-clients-realm"
(0)       } # update control = noop
(0)     } # if (NAS-Identifier == "wifi")  = noop
(0)     if (NAS-Identifier == "l2tp") {
(0)     if (NAS-Identifier == "l2tp")  -> FALSE
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = noop
(0)     } # policy filter_username = noop
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Request is supposed to be proxied to Realm wifi-clients-realm. Not
doing EAP.
(0)     [eap] = noop
(0)     [files] = noop
(0)     [expiration] = noop
(0)     [logintime] = noop
(0)     policy ntlm_auth.authorize {
(0)       if (!control:Auth-Type && User-Password) {
(0)       if (!control:Auth-Type && User-Password)  -> FALSE
(0)     } # policy ntlm_auth.authorize = ok
(0)   } # authorize = ok
(0) Starting proxy to home server (null) port 0
Proxying to virtual server wifi-clients
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Request already has destination realm set.  Ignoring
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 28
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 22
(0) eap: EAP session adding &reply:State = 0x84fcd24884fed687
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(0)   Challenge { ... } # empty sub-section is ignored
(0) Finished internally proxied request.
(0) Clearing existing &reply: attributes
(0) # Executing section post-proxy from file
/etc/freeradius/3.0/sites-enabled/default
(0)   post-proxy {
(0) eap: No pre-existing handler found
(0)     [eap] = noop
(0)   } # post-proxy = noop
(0) Clearing existing &reply: attributes
(0) Found Post-Proxy-Type Fail-Authentication
(0) Post-Proxy-Type sub-section not found.  Ignoring.
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 248 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(0)   State = 0xcc0a604ac658f11de08e2f27854526bf
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 248 with timestamp +2
Ready to process requests
(1) Received Access-Request Id 249 from 10.10.10.10:57160 to 10.10.8.43:1812
length 180
(1)   User-Name = "host/PC06820.example.com"
(1)   NAS-Identifier = "wifi"
(1)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(1)   NAS-Port-Type = Wireless-802.11
(1)   NAS-Port = 1
(1)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(1)   Connect-Info = "CONNECT 54Mbps 802.11g"
(1)   Framed-MTU = 1400
(1)   EAP-Message =
0x0210001c01686f73742f504330363832302e67702e7669656c2e6465
(1)   Message-Authenticator = 0x2648407773283df8029c58cf3be4652b
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     if (NAS-Identifier == "wifi") {
(1)     if (NAS-Identifier == "wifi")  -> TRUE
(1)     if (NAS-Identifier == "wifi")  {
(1)       update control {
(1)         Proxy-To-Realm := "wifi-clients-realm"
(1)       } # update control = noop
(1)     } # if (NAS-Identifier == "wifi")  = noop
(1)     if (NAS-Identifier == "l2tp") {
(1)     if (NAS-Identifier == "l2tp")  -> FALSE
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = noop
(1)     } # policy filter_username = noop
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Request is supposed to be proxied to Realm wifi-clients-realm. Not
doing EAP.
(1)     [eap] = noop
(1)     [files] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1)     policy ntlm_auth.authorize {
(1)       if (!control:Auth-Type && User-Password) {
(1)       if (!control:Auth-Type && User-Password)  -> FALSE
(1)     } # policy ntlm_auth.authorize = ok
(1)   } # authorize = ok
(1) Starting proxy to home server (null) port 0
Proxying to virtual server wifi-clients
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Request already has destination realm set.  Ignoring
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 16 length 28
(1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(1)   authenticate {
(1) eap: Peer sent packet with method EAP Identity (1)
(1) eap: Calling submodule eap_md5 to process data
(1) eap_md5: Issuing MD5 Challenge
(1) eap: Sending EAP Request (code 1) ID 17 length 22
(1) eap: EAP session adding &reply:State = 0x93a8563f93b95236
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(1)   Challenge { ... } # empty sub-section is ignored
(1) Finished internally proxied request.
(1) Clearing existing &reply: attributes
(1) # Executing section post-proxy from file
/etc/freeradius/3.0/sites-enabled/default
(1)   post-proxy {
(1) eap: No pre-existing handler found
(1)     [eap] = noop
(1)   } # post-proxy = noop
(1) Clearing existing &reply: attributes
(1) Found Post-Proxy-Type Fail-Authentication
(1) Post-Proxy-Type sub-section not found.  Ignoring.
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 249 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(1)   State = 0x7804fdcf7bc89872f2224c39194cb567
(1) Finished request
Waking up in 4.9 seconds.
(1) Cleaning up request packet ID 249 with timestamp +21
Ready to process requests
(2) Received Access-Request Id 250 from 10.10.10.10:57160 to 10.10.8.43:1812
length 180
(2)   User-Name = "host/PC06820.example.com"
(2)   NAS-Identifier = "wifi"
(2)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(2)   NAS-Port-Type = Wireless-802.11
(2)   NAS-Port = 1
(2)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(2)   Connect-Info = "CONNECT 54Mbps 802.11g"
(2)   Framed-MTU = 1400
(2)   EAP-Message =
0x0299001c01686f73742f504330363832302e67702e7669656c2e6465
(2)   Message-Authenticator = 0x0fe8d59c93078d158b66ed6b36acdc02
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     if (NAS-Identifier == "wifi") {
(2)     if (NAS-Identifier == "wifi")  -> TRUE
(2)     if (NAS-Identifier == "wifi")  {
(2)       update control {
(2)         Proxy-To-Realm := "wifi-clients-realm"
(2)       } # update control = noop
(2)     } # if (NAS-Identifier == "wifi")  = noop
(2)     if (NAS-Identifier == "l2tp") {
(2)     if (NAS-Identifier == "l2tp")  -> FALSE
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = noop
(2)     } # policy filter_username = noop
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Request is supposed to be proxied to Realm wifi-clients-realm. Not
doing EAP.
(2)     [eap] = noop
(2)     [files] = noop
(2)     [expiration] = noop
(2)     [logintime] = noop
(2)     policy ntlm_auth.authorize {
(2)       if (!control:Auth-Type && User-Password) {
(2)       if (!control:Auth-Type && User-Password)  -> FALSE
(2)     } # policy ntlm_auth.authorize = ok
(2)   } # authorize = ok
(2) Starting proxy to home server (null) port 0
Proxying to virtual server wifi-clients
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Request already has destination realm set.  Ignoring
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 153 length 28
(2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(2)   authenticate {
(2) eap: Peer sent packet with method EAP Identity (1)
(2) eap: Calling submodule eap_md5 to process data
(2) eap_md5: Issuing MD5 Challenge
(2) eap: Sending EAP Request (code 1) ID 154 length 22
(2) eap: EAP session adding &reply:State = 0xc526d466c5bcd065
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(2)   Challenge { ... } # empty sub-section is ignored
(2) Finished internally proxied request.
(2) Clearing existing &reply: attributes
(2) # Executing section post-proxy from file
/etc/freeradius/3.0/sites-enabled/default
(2)   post-proxy {
(2) eap: No pre-existing handler found
(2)     [eap] = noop
(2)   } # post-proxy = noop
(2) Clearing existing &reply: attributes
(2) Found Post-Proxy-Type Fail-Authentication
(2) Post-Proxy-Type sub-section not found.  Ignoring.
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 250 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(2)   State = 0xea19bb9f6a97a0de4457318706242998
(2) Finished request
Waking up in 4.9 seconds.
(2) Cleaning up request packet ID 250 with timestamp +40
Ready to process requests
(3) Received Access-Request Id 251 from 10.10.10.10:57160 to 10.10.8.43:1812
length 180
(3)   User-Name = "host/PC06820.example.com"
(3)   NAS-Identifier = "wifi"
(3)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(3)   NAS-Port-Type = Wireless-802.11
(3)   NAS-Port = 1
(3)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(3)   Connect-Info = "CONNECT 54Mbps 802.11g"
(3)   Framed-MTU = 1400
(3)   EAP-Message =
0x029f001c01686f73742f504330363832302e67702e7669656c2e6465
(3)   Message-Authenticator = 0x09e41e9bc40b1a9bd5f40708ea9f5e4e
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     if (NAS-Identifier == "wifi") {
(3)     if (NAS-Identifier == "wifi")  -> TRUE
(3)     if (NAS-Identifier == "wifi")  {
(3)       update control {
(3)         Proxy-To-Realm := "wifi-clients-realm"
(3)       } # update control = noop
(3)     } # if (NAS-Identifier == "wifi")  = noop
(3)     if (NAS-Identifier == "l2tp") {
(3)     if (NAS-Identifier == "l2tp")  -> FALSE
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = noop
(3)     } # policy filter_username = noop
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Request is supposed to be proxied to Realm wifi-clients-realm. Not
doing EAP.
(3)     [eap] = noop
(3)     [files] = noop
(3)     [expiration] = noop
(3)     [logintime] = noop
(3)     policy ntlm_auth.authorize {
(3)       if (!control:Auth-Type && User-Password) {
(3)       if (!control:Auth-Type && User-Password)  -> FALSE
(3)     } # policy ntlm_auth.authorize = ok
(3)   } # authorize = ok
(3) Starting proxy to home server (null) port 0
Proxying to virtual server wifi-clients
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Request already has destination realm set.  Ignoring
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 159 length 28
(3) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(3)   authenticate {
(3) eap: Peer sent packet with method EAP Identity (1)
(3) eap: Calling submodule eap_md5 to process data
(3) eap_md5: Issuing MD5 Challenge
(3) eap: Sending EAP Request (code 1) ID 160 length 22
(3) eap: EAP session adding &reply:State = 0xbc098a48bca98e33
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(3)   Challenge { ... } # empty sub-section is ignored
(3) Finished internally proxied request.
(3) Clearing existing &reply: attributes
(3) # Executing section post-proxy from file
/etc/freeradius/3.0/sites-enabled/default
(3)   post-proxy {
(3) eap: No pre-existing handler found
(3)     [eap] = noop
(3)   } # post-proxy = noop
(3) Clearing existing &reply: attributes
(3) Found Post-Proxy-Type Fail-Authentication
(3) Post-Proxy-Type sub-section not found.  Ignoring.
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 251 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(3)   State = 0x191ba4e0ef56de3a3e2fa9ad979524a5
(3) Finished request
Waking up in 4.9 seconds.
(3) Cleaning up request packet ID 251 with timestamp +59
Ready to process requests
(4) Received Access-Request Id 252 from 10.10.10.10:57160 to 10.10.8.43:1812
length 180
(4)   User-Name = "host/PC06820.example.com"
(4)   NAS-Identifier = "wifi"
(4)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(4)   NAS-Port-Type = Wireless-802.11
(4)   NAS-Port = 1
(4)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(4)   Connect-Info = "CONNECT 54Mbps 802.11g"
(4)   Framed-MTU = 1400
(4)   EAP-Message =
0x020a001c01686f73742f504330363832302e67702e7669656c2e6465
(4)   Message-Authenticator = 0x46b8aeb3c590460ccbd4294412d219d5
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     if (NAS-Identifier == "wifi") {
(4)     if (NAS-Identifier == "wifi")  -> TRUE
(4)     if (NAS-Identifier == "wifi")  {
(4)       update control {
(4)         Proxy-To-Realm := "wifi-clients-realm"
(4)       } # update control = noop
(4)     } # if (NAS-Identifier == "wifi")  = noop
(4)     if (NAS-Identifier == "l2tp") {
(4)     if (NAS-Identifier == "l2tp")  -> FALSE
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = noop
(4)     } # policy filter_username = noop
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Request is supposed to be proxied to Realm wifi-clients-realm. Not
doing EAP.
(4)     [eap] = noop
(4)     [files] = noop
(4)     [expiration] = noop
(4)     [logintime] = noop
(4)     policy ntlm_auth.authorize {
(4)       if (!control:Auth-Type && User-Password) {
(4)       if (!control:Auth-Type && User-Password)  -> FALSE
(4)     } # policy ntlm_auth.authorize = ok
(4)   } # authorize = ok
(4) Starting proxy to home server (null) port 0
Proxying to virtual server wifi-clients
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Request already has destination realm set.  Ignoring
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 10 length 28
(4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(4)   authenticate {
(4) eap: Peer sent packet with method EAP Identity (1)
(4) eap: Calling submodule eap_md5 to process data
(4) eap_md5: Issuing MD5 Challenge
(4) eap: Sending EAP Request (code 1) ID 11 length 22
(4) eap: EAP session adding &reply:State = 0x9cd322f39cd8262b
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(4)   Challenge { ... } # empty sub-section is ignored
(4) Finished internally proxied request.
(4) Clearing existing &reply: attributes
(4) # Executing section post-proxy from file
/etc/freeradius/3.0/sites-enabled/default
(4)   post-proxy {
(4) eap: No pre-existing handler found
(4)     [eap] = noop
(4)   } # post-proxy = noop
(4) Clearing existing &reply: attributes
(4) Found Post-Proxy-Type Fail-Authentication
(4) Post-Proxy-Type sub-section not found.  Ignoring.
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 252 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(4)   State = 0x02acfce1055f93a3ed31d5c1f8fbf030
(4) Finished request
Waking up in 4.9 seconds.
(4) Cleaning up request packet ID 252 with timestamp +88
Ready to process requests
(5) Received Access-Request Id 253 from 10.10.10.10:57160 to 10.10.8.43:1812
length 180
(5)   User-Name = "host/PC06820.example.com"
(5)   NAS-Identifier = "wifi"
(5)   Called-Station-Id = "00-1A-8C-2C-EB-42:DV"
(5)   NAS-Port-Type = Wireless-802.11
(5)   NAS-Port = 1
(5)   Calling-Station-Id = "20-68-9D-2E-7A-B3"
(5)   Connect-Info = "CONNECT 54Mbps 802.11g"
(5)   Framed-MTU = 1400
(5)   EAP-Message =
0x02bc001c01686f73742f504330363832302e67702e7669656c2e6465
(5)   Message-Authenticator = 0x985d1b8da13d12e831481a1c68b7bd4a
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     if (NAS-Identifier == "wifi") {
(5)     if (NAS-Identifier == "wifi")  -> TRUE
(5)     if (NAS-Identifier == "wifi")  {
(5)       update control {
(5)         Proxy-To-Realm := "wifi-clients-realm"
(5)       } # update control = noop
(5)     } # if (NAS-Identifier == "wifi")  = noop
(5)     if (NAS-Identifier == "l2tp") {
(5)     if (NAS-Identifier == "l2tp")  -> FALSE
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = noop
(5)     } # policy filter_username = noop
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "host/PC06820.example.com", looking up
realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Request is supposed to be proxied to Realm wifi-clients-realm. Not
doing EAP.
(5)     [eap] = noop
(5)     [files] = noop
(5)     [expiration] = noop
(5)     [logintime] = noop
(5)     policy ntlm_auth.authorize {
(5)       if (!control:Auth-Type && User-Password) {
(5)       if (!control:Auth-Type && User-Password)  -> FALSE
(5)     } # policy ntlm_auth.authorize = ok
(5)   } # authorize = ok
(5) Starting proxy to home server (null) port 0
Proxying to virtual server wifi-clients
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Request already has destination realm set.  Ignoring
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 188 length 28
(5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(5)   authenticate {
(5) eap: Peer sent packet with method EAP Identity (1)
(5) eap: Calling submodule eap_md5 to process data
(5) eap_md5: Issuing MD5 Challenge
(5) eap: Sending EAP Request (code 1) ID 189 length 22
(5) eap: EAP session adding &reply:State = 0x4d7d96634dc09250
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file
/etc/freeradius/3.0/sites-enabled/wifi-clients
(5)   Challenge { ... } # empty sub-section is ignored
(5) Finished internally proxied request.
(5) Clearing existing &reply: attributes
(5) # Executing section post-proxy from file
/etc/freeradius/3.0/sites-enabled/default
(5)   post-proxy {
(5) eap: No pre-existing handler found
(5)     [eap] = noop
(5)   } # post-proxy = noop
(5) Clearing existing &reply: attributes
(5) Found Post-Proxy-Type Fail-Authentication
(5) Post-Proxy-Type sub-section not found.  Ignoring.
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 253 from 10.10.8.43:1812 to 10.10.10.10:57160
length 0
(5)   State = 0x9af9b7683dae0ca97a5c4c6d28349ebf
(5) Finished request
Waking up in 4.9 seconds.
(5) Cleaning up request packet ID 253 with timestamp +107
Ready to process requests

FreeRADIUS Proxy configuration not working

Thomas Schachtner